Table of Contents
How do you lift a washing machine by yourself?
Move the hand holding the leg stand at the front to the corner at the back, so you’re holding both sides. Lift the washing machine and let it rest on your leg. Pull the appliance up to your chest and keep your arms at a 45-degree angle.
Can you transport a washing machine on its side?
It’s recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.
How do you transport a top loading washing machine?
Top Load and Unitized Washers – Moving Instructions Unplug the power cord. Re-install the shipping rod or shipping material (if available). Turn off the hot and cold water supply to the washer. Carefully unscrew and remove the hoses from the washer and the faucets. Remove drain hose from house drain standpipe.
How do you transport a washing machine?
The safest way to move a washer is by transporting it in an upright position. Due to the height and awkward shape of most washing machines, a dolly is recommended to get your washing machine off the ground and through any obstacles, be they a flight of stairs or up inside a truck.
Can you transport a washing machine in a car?
The likelihood is that your washing machine will not fit comfortably in your car. Especially if it is still secured upright, which it always should be. During the drive, you (or your courier) should try to avoid bumps in the road as much as possible, as this could damage the washing machine’s delicate engineering.
Can one person move a washing machine?
Yes, it’s possible to move a washing machine without hiring movers – following these washer moving tips and steps will help you do just that. However, you can’t finish the job entirely on your own – you’re still going to need at least two other helpers to keep things safe.
Why is my washing machine shaking violently?
Possible Cause: Unbalanced Washer If the washing machine is not balanced, it may shake violently during the spin cycle, causing water to spill on the floor. Redistributing the load will usually solve this issue if the cause is due to too many clothes on one side of the unit.
What happens if your washing machine isn’t level?
If your washing machine is not perfectly level with all four legs touching the floor it can bang and rock back and forth. This isn’t good for the machine and may damage walls and floors and anything else near the machine. Severe vibrations are a leading cause of future leaks and mechanical problems.
Does a washing machine have to be level?
The washer must be level both from front to back and from side to side, and all four of its feet must be touching the ground. If you can rock the machine back and forth diagonally from corner to corner, its feet are not secure and level.
How heavy is a washing machine?
A large capacity washing machine can weigh almost 230 pounds. A medium-capacity top-loading washing machine weighs around 150 pounds while a medium front-loading washer weight can weigh as much as 180 pounds. Tip: If you can’t secure enough help to move your washer, consider hiring professional movers.
How do you transport a washing machine without bolts?
You can remove the power cord and drain hoses, then wrap the washer with some dolly straps and then load it onto the dolly or truck for transport. You have to try to get a better hold of shipping bolts if possible so that you can make sure of the safety of the washer.
Can you transport a top load washer on its back?
Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side, front, or back can damage it. When you install your washer in your new home, most likely you will have to level and balance it. Also, make sure you take out the shipping bolts before using the washer at your new location.
Can you transport a top loading washing machine on its side?
You should always keep a washing machine upright when transporting it. A washing machine moved with a car is next to impossible as it cannot be kept upright. Laying the washer on its side can cause major damage to the drum and components and is not recommended.
What happens if you move a washing machine without transit bolts?
Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. However, you must remember to remove the transit bolts once your move is complete, as they can seriously damage your machine should you begin a wash cycle with them still in place.
Do all washing machines have transit bolts?
Normally when you get your new washing machine there will be two (rare), three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine.
