QA

How To Make A Homemade Bar

What do you need to build your own bar?

Required Materials for this Project 2 x 4s. 3/4-in. plywood. Bar molding. Base material. Beer tap kit. Construction adhesive. Drywall screws. Foam insulation.

How much does it cost to build a home bar?

A home bar costs $8,000 on average or $500 to $22,500. Custom work runs $5,000 to $20,000. Premade units run from $800 to $6,000, not including plumbing, outlets or lighting. Labor and design fees range from $200 to $8,000.

How big should a home bar be?

Most standard home bar designs are at least 6′ long to accommodate three bar stools or an 8′ bar that will give you room for four stools. You’ll also want to think about the shape that you’d like your bar to be.

How tall should bars be?

Bar height is the tallest option available. Bar-height tables usually measure between 40 to 42 inches high. In comparison, the seat heights of bar stools and chairs are anywhere between 28 to 33 inches.

What is a wet bar vs dry bar?

Essentially, a wet-bar has a sink with running water. A dry bar only has a place where you can prepare drinks and no sink. The technical difference is just a matter of plumbing.

How long does it take to build a bar?

Option 3: Start a do-it-yourself home bar project It will take 2-3 days to finish the bar, assuming you’re willing to devote at least 6 hours per day working on it.

Does a home bar add value to a home?

Does a Wet Bar Add Value to a Home? According to Remodeling magazine’s cost-versus-value projection, a basement remodel with a home-based pub and bathroom is around 70%.

What kind of wood should I use for a bar top?

Many experienced woodworkers consider walnut to be the best wood for bar tops due to its shock resistance and range of colors. Walnut can be golden, honey colored or medium to dark brown. Walnut bar tops can be satin-smooth with a muted grain or conversation pieces with prominent textures and knotholes.

What are bar tops made of?

What are the Best Bar Top Materials? Laminate. Laminate is an affordable material that is easy to care for and available in a wide range of colors and styles. Granite. If you are looking for something high-end, granite is a great option. Solid Surface. Marble. Wood.

How much space does a bar need?

Allow at least 36 inches between the bar and the back bar or wall. This is a bare minimum to allow a single bartender space. If constructing a large bar, where it is possible more than one person will be behind the bar, allow more space. The builder should also plan the electrical outlets and lighting for the bar.

How do you size a bar?

The standard bar height from the floor to the top of a bar top (excluding the bar rail) should be 42”. This allows for a standard 30” high bar stool to seat you comfortably at your bar.

What is the typical depth of a bar top?

Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.

How long is a bar?

This grouping of four beats is called a bar or measure. Here’s a drum pattern that’s two bars long: Songs are made by putting multiple bars of music together to form larger sections, and then putting these larger sections together.

What is the typical bar overhang?

A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.

How much space do you need behind a home bar?

Walking space behind the bar should be 3′ wide minimum. Front bar width will be either be 2′-10″ or 3′-6″ depending on either a 1 or 2 tier bar. Bar stool area should be at least a 3′ area to move bar stools in and out.

How do you make a dry bar?

Follow these steps to get started: Buy or Build Your Cabinets. The first thing you’ll want to do is decide if you’re going to build the cabinets for your dry bar or purchase premade ones. Prepare the Cabinets for Painting. Paint the Cabinets. Install the Cabinets. Install the Bar Top. Add Upper Cabinets or Shelves. Enjoy.

What is a home bar called?

A wet bar is a small bar used for mixing and serving alcoholic beverages that includes a sink with running water, as opposed to a “dry bar” that does not include a sink. Wet bars are found in homes for entertainment purposes. Near a kitchen or in a finished basement are some typical locations for a wet bar.

What is a bar area called in a house?

A dry bar is a piece of furniture or separate counter area built into a room, designed to hold everything you need for an in-home bar: bottles, barware, cocktail napkins and other accessories.

How do you secure a bar to the floor?

Secure it to the floor using common wood screws that are long enough to penetrate through the floor overlay into the subfloor. Remove the baseboard if it has already been installed on the wet bar. Place a 3/16-inch drill bit in a cordless drill. Place 3-inch screws in all the holes.