Table of Contents
Steps Cut the Parts. Using a miter saw and the cut list above, cut the 1×6, 1×3, and square dowels to size. Drill the Drawer Face Holes. Add Cleats to the Front and Back Pieces. Attach Cleats to the 1×3 Side Pieces. Dryfit the Sides. Assemble the Sides. Insert the Plywood Base. Attach the Drawer Face.
How do you make a simple drawer box?
What wood should I use to build a drawer?
Poplar is a great all-around choice for drawer box construction. It is stable, durable, and much less expensive than most hardwoods. The color of poplar heartwood ranges from a creamy white to a yellowish tan or brown. It is very easy to work with and has straight, uniform grain.
How do you make a custom drawer?
How to Make Drawers in 6 Easy Steps Determine Drawer Height and Rough Cut Parts. Match Drawer Sides to Your Drawer Slides. Measure Drawer Opening and Cut Fronts and Backs. Drill Pocket Holes and Assemble Drawer Box. Measure, Cut and Install Drawer Bottoms. Add False Drawer Fronts to Drawer Box.
What kind of plywood do you use for drawers?
Drawer sides should generally be constructed of half-inch plywood, while the drawer bottom should be made of quarter-inch plywood. Columbia makes it easy to construct quality, durable drawers using our maple drawer sides.
How do you make wooden drawers not stick?
Paraffin or nylon tape keeps wooden drawers from sticking. Make stuck drawers open smoothly again with a little paraffin or special nylon tape that lubricates those rubbing, sticky surfaces. It’s a 5-minute fix.
Is plywood good for drawers?
Drawer boxes, even high-quality handmade boxes, typically have plywood bottoms. This is because plywood is flat, strong, and dimensionally stable (it expands and contracts much less than solid wood). It’s also much easier to cut a single piece of plywood to fit a drawer box than to glue up a bunch of hardwood planks.
How thick should plywood be for drawers?
I’ve had good success with 3/4 inch Baltic birch plywood fastened together with Kreg system pocket screws. This produces a very strong box and drawer with no glue required. 3/4″ ply would be too thick for normal cabinet drawers, I think, but it seemed a good choice for heavy, pull-out-the-rear equipment drawers.
Is MDF good for making drawers?
MDF is an abbreviation for medium-density fiberboard, which is a type of wood particle boards. MDF sheets are not the same as chipboard or plywood. The reason why MDF is an ideal choice for drawer-building is because it cuts and sands well.
How thick should a drawer bottom be?
The sides and back of the drawer should be 1⁄2” or 5⁄8” thick. Use thinner stock for smaller drawers and thicker stock for big ones. The bottom is usually 1⁄4“-thick plywood for small drawers or 1⁄2“-thick material for bigger drawers, or drawers that will hold heavy objects.
Can you screw into plywood?
Plywood is used in most construction projects. Putting screws into plywood is not difficult but care should be taken not to split the wood. There are many different types of plywood and screws. This procedure can be used with most combinations.
Can I use MDF for a drawer bottom?
I use 3\8 MDF for drawer bottoms. I find it plenty strong and stable.
What is a grade plywood?
A-grade plywood features a smooth, sanded surface without knots. Any wood defects have been repaired with synthetic filler, so the veneer can be painted. A-grade plywood is ideal for furniture or cabinet doors.
What to use on drawers that stick?
Fix Sticky Drawers with A Lubricant Rub the drawer frame — the spots where the drawer glides into the frame — with candle wax, paraffin, or even an old bar of soap to give it a little extra glide. You can also spray them with a product such ad WD-40.
Why do wooden drawers stick?
In addition to use over time, another issue that can cause old drawers to stick in wooden furniture is living in a place of high humidity. Any solid wood piece or piece of furniture that contains wood components will absorb moisture over time.
How do you make your own slide?
In the slide pane click on the slide where you would like the new slide to appear below. Click on the New Slide button located on the Home tab in the Slides group. The new slide should appear below the selected slide. If you want to add a new slide between two, select the first of the two slides and click New Slide.
What is the best material for a slide?
Steel is the classic option for a playground slide. It’s durable and slick, which lets kids reach higher speeds. Plastic isn’t quite as durable are steel, but it’s cheaper and much safer. This is the preferred material for the modern commercial-grade playground.
How do you make a drawer without dovetails?
Dowel Joints One of the very best ways to build a drawer without dovetails is a dowel joint. The dowel joint offers much of the strength and durability of the dovetail and still has an attractive look. A dowel joint is made by drilling holes through the sides of the drawer box into the edges of the front and back.
What can I use for the bottom of a drawer?
The most common materials for drawer bottoms are 1⁄4” hardboard or plywood. For small and medium-size drawers, hardboard will stand up to a moderate amount of weight. For a heavier load, you can step up to plywood. Baltic birch plywood is a great choice.
How deep should drawers be?
Drawer depth or height is not critical, but the most common difference between the drawer and the opening is 3/4 inch. For example, if the opening measures 4 inches vertically, the drawer should be built 3 1/4 inches. This allows 1/4 inch at the bottom where the slide is attached, and 1/2 inch at the top for clearance.
