QA

Quick Answer: How To Make Concrete Smoother

How do you make a concrete finish smoother?

For a really smooth finish, repeat the troweling step two or three times, letting the concrete harden a bit between each pass. At first, hold the trowel almost flat, elevating the leading edge just enough to avoid gouging the surface. On each successive pass, lift the leading edge of the trowel a little more.

Can you grind concrete to make it smooth?

If you have any type of concrete surface, it can be smoothed with a concrete grinder to achieve the desired look using common concrete grinding techniques. It works on rough concrete surfaces, resulting in a smooth and stylish finish.

How do you fix a rough concrete floor?

Fill the damaged areas with epoxy resin to the surface level of the surrounding concrete floor. Use a putty knife to fill the crack or hole in the concrete, and then level the top of the resin with the floor using the knife. Allow the patch to dry overnight.

How do you fix a bad broom on concrete?

There are two things you can do fix the rough finish. One is, you could grind or polish the surface which would remove the rough broom finish and smooth the surface of the concrete. Some of the aggregate would be exposed giving you a nice smooth decorative look to your sidewalk and patio.

What can I use to sand down concrete?

For basic sanding, use sandpaper with the grit between 40-60. To remove minor irregularities, use 80-120 grit sandpaper. For perfect finish and smoothness, use superfine sandpaper with grit ranging between 200-400. If there are severe imperfections, then you need to use a floor grinder or special diamond disc.

Can you smooth out concrete after it dries?

Sand the Surface and Wash the Concrete Finish by fine-tuning with light sandpaper, until the surface is perfectly smooth. We recommend using a hand planer to smooth and compact the surface. If the concrete dries a lot then we recommend that you add water to the surface, this will help you give it a good finish.

How do you smooth out a rough concrete patio?

Avoid having to smooth rough concrete with an aggressive concrete grinding machine and choose instead to resurface the concrete. Apply wet concrete resurfacer on top of old concrete to create a smooth overlay that gives your patio a fresh, new look.

How do you remove texture from concrete?

Mix a gallon of warm water with 2 or 3 ounces of trisodium phosphate and pour it directly over any difficult stains on your concrete. Use your wire brush to scrub the concrete surface and then rinse with water. You can find trisodium phosphate, or TSP, for sale in home improvement stores.

How do you fix rough concrete garage floor?

Clean the slab and fill deep holes and cracks Clean the slab and fill deep holes and cracks. Start with a clean floor. Remove the loose stuff. Concrete Floor Patch: Fill cracks, craters, divots and pits. Create a dam. Spread it smooth, then let it set.

How much will a concrete grinder remove?

On average, using concrete grinders will remove around 1/16 of an inch in one pass. You need to be diligent and patient in eliminating several layers of concrete and adhesives. Concrete grinding is a slow but valuable process to have in your repertoire!Feb 25, 2021.

How can I grind concrete without dust?

Steps: If no dust extraction is available for drilling or grinding, running a water hose onto the surface or holding a vacuum up to the tool will keep dust down. Use a drill dust attachment by turning the vacuum on and sticking the attachment to the surface. The suction from the vacuum should hold it in place.

Can I sand concrete instead of etching?

In our experience, the simple answer is no. While acid etching is better than doing nothing to profile the concrete, it simple does not work as well as a floor grind. There are a wide range of concrete types, varying in composition, hardness levels, and texture–meaning there isn’t a one size fits all solution.

Can you sand concrete with a palm sander?

If you only have a small area to sand, you can also use a palm sander, orbital sander or belt sander. Rough imperfections may require the use of a special diamond disc and a concrete floor grinder.

Can you use orbital sander on concrete?

An orbital sander is the correct equipment to use when sanding concrete. To remove only a small rough patch or uneven area, you can use 1000-grit automobile black sandpaper, which is very fine and will not remove much of the concrete.

Can you sand down concrete?

You can sand concrete by hand and the right grit sandpaper will help you get the job done. Do not forget that when sanding concrete by hand, you will still need to mitigate the concrete dust produced. Keep your work area wet to keep the dust down and consider wearing a face mask or dust mask.

Can you sand concrete to level?

You can use a two-handled sanding and buffing machine with a sanding pad attached to the bottom to sand out large sections of both concrete and wood floors, although you should vacuum out the pad periodically throughout the process to keep the sanding pad working at peak efficiency.

What is it called when you smooth concrete?

A concrete finisher is a skilled tradesperson who works with concrete by placing, finishing, protecting and repairing concrete in engineering and construction projects. After levelling the concrete, they smooth the surface using either a hand trowel, a long handed bull float or by using powered floats.

How do you make concrete glossy?

After you stain your concrete floor with the color of your choice, you should apply a concrete sealer. A glossy sealer creates a shiny surface, and an acrylic wax adds an additional protective coat.