Table of Contents
How to Make Lye – Method #1 Fill a glass or stainless steel pot with ashes. Add soft water to barely cover the ashes. Boil the slurry about half an hour. Let the mixture cool and the ashes sink to the bottom of the pot. Skim the liquid from the top and store it in a plastic, glass, or wooden container.
What can I substitute for lye water?
It can be replaced by a homemade version made from two extremely common ingredients – baking soda and water. There are two approaches to making alkaline solution at home: one that uses baking soda and one that uses baked baking soda. However, baked baking soda is recommended for both mooncake and ramen making.
What is the lye to water ratio?
The lye to water ratio of the lye solution is roughly 1 part lye to 2.3 parts water.
What is lye water for soap?
Soap. Lye in the form of both sodium hydroxide and potassium hydroxide is used in making soap. Potassium hydroxide soaps are softer and more easily dissolved in water than sodium hydroxide soaps. Lye is added to water, cooled for a few minutes and then added to oils and butters.
Is baking soda is lye water?
You only need two ingredients for homemade lye water: Baked baking soda and water. Mix them at a 1:4 ratio. Then you’re ready to use it!Jul 2, 2021.
Is baking soda a lye?
Originally Answered: Is baking soda same as lye? No. baking soda is sodium (hence the “soda” in the name) bicarbonate (NaHCO3), while lye (also known as “caustic soda”) is sodium hydroxide (NaOH).
What happens if you put too much lye in soap?
There are two common issues people run into when making soap: not enough lye or too much lye used. Too much lye will result in a bar whose pH is too high and can cause skin irritation and burning. Not enough lye can result in oils going rancid, causing discoloration and bad odors.
What is a lye calculator?
A lye calculator is a tool that helps simplify things by calculating the amount of lye you need according to the oils you choose for your recipe. To use a lye calculator, you input the oils you want to use, the amount of each oil you plan on using, and you can also specify if you want to superfat the soap or not.
How do you make lye solution at home?
Instructions Weigh the Water. To begin, put on your safety goggles and rubber gloves, and make sure your work space has good ventilation. Weigh the Lye. Place the mason jar on the scale, and zero out the weight. Add the Lye to the Water. Stir the Lye and Water Mixture. Set the Lye Solution in a Safe Place to Cool.
Can you make your own lye?
To make lye in the kitchen, boil the ashes from a hardwood fire (soft woods are too resinous to mix with fat) in a little soft water, rainwater is best, for about half an hour. Allow the ashes to settle to the bottom of the pan and then skim the liquid lye off the top.
How much lye do you need for soap?
The Pallas Athene Soap company formulated a quick and easy cold process soap recipe that requires exactly 20 ounces of lye (the size of 1 canister from Certified Lye™) and yields a superior bar of natural soap.
Can you make soap with baking soda instead of lye?
It is certainly possible to make an acceptable cold process soap using baking soda or washing soda, but lather performance suffers compared to the same soap formula without them. This supports the conventional wisdom that they are better used in a hot process soap (after the cook) or in a rebatched soap.
What is the ingredients of lye water?
bicarbonate soda (bicarb) sodium carbonate. sodium bicarbonate. lye salt.
Does lye water expire?
If your lye solution does not get very hot, it may be expired. Above, the potassium hydroxide lye solution using expired lye only reached 124 ° F. If you notice anything odd happening with your lye, don’t use it in cold process soap. Expired lye doesn’t saponify properly, meaning your soap may not reach trace.
Can soap be made without lye?
Soap is an alkali (like sodium hydroxide or potassium hydroxide) combined with fats. Together they go through a reaction called “saponification”, and in the end you are left with soap. So, by the very definition of “soap”, you cannot make soap without lye.
Can you use hydrogen peroxide to make soap?
“When you add peroxide to dish soap, it breaks down into oxygen and water. The soapy water then traps that oxygen, creating bubbles, making your dish soap extra foamy.”Nov 12, 2020.
Is there a substitute for lye in soap making?
The main way that you can make soap without handling lye is by using melt-and-pour soap. It’s already been through saponification (oils reacting with lye) and is safe to use and handle straight out of the package. All you do with it is melt it, add your scent, color, and other additives, then pour it into molds.
Does Dove soap contain lye?
Dove. It is true that the words “lye” or “sodium hydroxide” do not appear on the Dove ingredient label. But, the first ingredients listed were sodium tallowate, sodium cocoate, and sodium palm kernelate. Yes, Dove is made with lye!Feb 18, 2014.
How do you know if lye is out of soap?
The first test – the “zap test” – is nice and simple. It involves tapping the soap lightly on your tongue. It sounds weird, but it totally works. If it “zaps” you, it is likely lye heavy.
