QA

Quick Answer: How To Make Wood Bar Top

What is the best wood to make a bar top out of?

Many experienced woodworkers consider walnut to be the best wood for bar tops due to its shock resistance and range of colors. Walnut can be golden, honey colored or medium to dark brown. Walnut bar tops can be satin-smooth with a muted grain or conversation pieces with prominent textures and knotholes.

How thick should plywood be for bar top?

When making a home or commercial bar top we always recommend using ¾” thick solid hardwood for the main bar top as it is more durable and longer lasting than a plywood top and can even be refinished.

What can I make a bar top out of?

Bar Top Ideas For Outdoor Bars Aluminum. Aluminum is a rust-proof and solid material for outdoor use as a bar top. Granite. Granite is a natural stone that you can find in an assortment of colors and patterns to fit a broad scope of design styles. Stainless Steel. Wood.

What is a good wood for a bar?

Best Wood for Bar Rail Walnut. Cherry. Red Oak. Maple. Poplar. Mahogany.

How thick should a bar countertop be?

Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide. The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood.

What kind of plywood should I use for a bar top?

Hardwood veneer plywood can be used by itself for the parts for the top. This drawing shows how I configure 3/4″ plywood for commercial bar tops. This can also work well for residential use. The sizes can be altered as desired.

Can you make a bar top out of plywood?

When it comes to making DIY bar tops, plywood is an excellent material to choose since it is so affordable and is also very easy to work with.

What wood are pub bars made from?

Victorian pub chairs come in many styles but, in an urban setting, they tend to work best as dark wood, stained and highly polished mahogany or walnut, occasionally with a padded seat.

Is Poplar a good wood for bar top?

Darker wood species, such as walnut, will need less staining and can look fantastic with just a layer of varnish to add protection and shine. Lighter species such as poplar and white oak can handle much more stain and will change appearance depending on how dark you decide to stain them.

Is maple good for bar top?

Maple Wood Countertops, Bar Tops, Butcher Block Countertops It is heavy, strong, straight-grained, and has a uniform texture. The grain can sometimes be curly or wavy. Hard maple has excellent resistance to abrasion and wear. All of these qualities make a Hard Maple Wood Countertop a great choice for your kitchen.

How deep is a typical bar top?

Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.

How much overhang should a bar top have?

A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.

What is the standard height of a bar countertop?

What is Bar Height Seating? The elevated counter or bar height counter seating is usually about 41″-43″ off the floor to the countertop. This is approximately 6” higher than the standard 35″-40″ kitchen counter height typically used throughout the rest of the kitchen design.

How much does a bar cost to build?

Average Cost to Build a Bar Average Cost $8,000 High Cost $22,500 Low Cost $500.

How do you make a wall breakfast bar?

Steps: Use a utility knife to cut along the corners of the wall and the ceiling. Make an inspection hole to see what wiring is behind the wall. Use a hammer to remove drywall all the way to the floor. Frame in the breakfast bar with 2x4s. Build the base for the cabinets with 2x4s. Set the cabinets in place on the base.

How do I set up a breakfast bar in my kitchen?

Breakfast bar ideas – 12 stylish ways to create space in your kitchen for snacking Include a breakfast bar into a kitchen island design. Choose a contrasting breakfast bar material. Make it multi-functional. Define a breakfast bar with a change of level. Fit a U-shaped layout. Extend an island with a breakfast bar.

Which plywood is strongest?

If you ever wondered “what is the strongest plywood?” The answer is Marine plywood. It is the strongest and toughest of all plywood on the market. It is bonded with high-quality glues to make the plies structurally solid and resistant to moisture.

What is the difference between exterior grade plywood and pressure treated plywood?

Pressure treated plywood has been put through a chemical process that injects preservatives into the wood. Those preservatives help make plywood less susceptible to bugs, mold, and rot. Exterior graded plywood refers to ply sheets that have had their veneers glued together with waterproof glue.

What are the 3 types of plywood?

Although specialty plywood can have any number of plies above three, most plywood is categorized as 3-ply, 5-ply or multi-ply. 3-ply is one of the most common types of plywood. It is about 2- to 3-millimeters thick and is generally used indoors, since it looks more decorative than thicker plywood boards.

Is polyurethane good for bar top?

For a brushed-on finish, oil-based polyurethane is best. It is significantly more durable than water-based polyurethane for bar tops and restaurant tables because alcohol spills and the chemicals used for cleaning will soften water-based polyurethane over time.