QA

How To Make Wood Shutters For Windows

What kind of wood do you use to make shutters?

Cedar is the most common material for construction of exterior shutters because of its resistance to both insects and decay. It is a straight wood that finishes very well and can withstand harsh outdoor conditions well.

How thick should wood be for shutters?

Thickness, Width, Height Our default standard thickness is 1 5/16″, but that can be varied from 7/8″ to 2 1/4″ to match existing exterior shutters. The length and height can be specified to the nearest 1/16″ inch.

Can you use untreated wood for shutters?

There are definitely more than one way to construct and hang shutters – I am simply sharing how we did it! Supplies needed to build shutters: Untreated Pine (we used 1.5 inch thick pine wood for the backboards and 3/4 inch thick pine for the cross board)Sep 21, 2016.

What kind of wood do you use for board and batten shutters?

Western Red Cedar is the most common material for building exterior board and batten shutters in the industry. Cedar has many of the same qualities as Redwood, yet is less dense, making it easier to sand and finish.

What is the difference between plantation shutters and California shutters?

California & Plantation style shutters refer to the size of the louvers. California style shutters have louvers which are 2 ½” in width. Plantation style shutters have louvers which are 3 ½” in width. The new louver size allows for even greater visibility.

How do you make louvered window shutters?

Instructions Cut the Rails, Stiles, and Slats. Round Over Each Slat’s Long Edges. Cut the Mortises in the Stiles. Cut the Tenons in the Rails. Make a Louver Jig for Your Router. Cut the Grooves for the Louvers. Assemble the Louvers. Complete the Louver Assembly.

How thick should window shutters be?

Refer to the chart at the right. When using vinyl shutters on windows that are wider than 50 inches, we recommend using double wide vinyl shutters.Shutter Width. Width of your windows Recommended shutter width 36″ to 40″ 14½” or 15″ 40″ to 43″ 14½”, 15″, or 16½” 43″ to 48″ 16½” 48″ to 50″ 16½” or 18″.

Is MDF good for shutters?

MDF is a much cheaper material than “real” wood, and therefore MDF shutters cost much less than wooden shutters. The robustness of MDF window shutters also make them particularly suitable for playroom or children rooms. MDF shutters are less prone to dent and scratches.

How long do pine shutters last?

Wood shutters are relatively long-lasting AND they can be repainted. Generally speaking, you may get anywhere from 10 to 20+ years out of use out of your shutters. However, they are more vulnerable to rot, termites and moisture damage comparatively.

What are basswood shutters?

Basswood shutters are a natural product built to bring warmth and character to fine homes. Like marble baths, granite countertops, oak floors and fine wool rugs, basswood shutters are deep and rich materials that create an authenticity and sense of permanence synthetic materials cannot duplicate.

How wide should board and batten shutters be?

Building Board and Batten Shutters Go ahead and cut all of your boards to length on a miter saw, and then make any rips that you need to accommodate the width of your window. Each batten will run diagonally across the boards and should be just shy of the width of your shutter.

How wide should board and batten be?

The battens should butt tightly against the top trim board and be flush at the bottom with the wider vertical boards. While the width of the battens is your choice, they should be wide enough to overlap the edges of the larger boards by at least ½ inch on both sides.

Are board and batten shutters popular?

Existing on historical cottages, European homes, and early American colonials for centuries, these classic shutters continue to be a popular choice, especially when the homeowner wants to create a rustic or modern farmhouse feel.

What do I need to build shutters?

DIY Board and Batten Window Shutters Wood (cedar or pine work fine) – 1″X 6″ boards. Make sure they are nice and straight. Nails. Wood glue. Miter saw (or get them cut at your local home improvement store) Decorative Plastic Hinges.

Should shutters be the same size as the window?

For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it. Typically, the width of your shutters should be half of your total window width. Keep in mind that the shutters should look like if they could close to cover the window.

What are exterior shutters made of?

Exterior window shutters come in four basic types: paneled, louvered, board and batton (sometimes called BnB) and Bermuda. They are available in a variety of materials including MDF (medium density fiber), vinyl, synthetic foam, faux wood and wood. Basswood is the most popular wood for shutters.

How much are Bahama shutters?

Bahama Shutters Cost: $33 – $50/sqft But they are priced at a premium.

Can you see out of Bahama shutters?

Storm protection: The main function of Bahama shutters is to provide protection during a hurricane. The hinges are located at the top of the window. Privacy: Another benefit of Bahama shutters is that they add privacy to your home. With the way the shutters are designed, you can see out and outsiders cannot see in.

What is the average cost of plantation shutters?

Plantation shutters cost anywhere from $70 to $420 per window, depending on many factors such as where you buy them, whether they’re custom-built, and the material they’re made from. According to HomeGuide, the national average cost to get plantation shutters installed is $2,350 total.

Is plantation shutters worth the money?

Whether you’re looking to increase the value of your home or save on energy costs, plantation shutters have something to offer. Overall, plantation shutters are worth the investment. Plantation shutters are durable, long-lasting, and practical.