QA

How To Measure Cabinet Doors

Measure from inside edge to inside edge and then notate that number, this will be your rough opening measurement. Do this for both the width and height for each door. Write down your measurement width x height for each inside frame measure. The measurements you have reflect the inside edges of your cabinets.

How do you measure for replacement cabinet doors?

Measure the cabinet opening: Measure in the same fashion as for a single door, getting the total width and height from the inside edge of the cabinet opening. Add space for door overlay: Add 1 inch to the height of the opening. For the width, add 1 inch to your total width and then divide by 2.

How do you determine cabinet size?

Don’t hesitate to get help in selecting cabinet sizes. Ask yourself what’s lacking in the height, width, and depth of your current cabinets and where you require more (or less) storage room. Most stock cabinets range in widths from 12 to 36 inches. Wall cabinets can range in height from 12 to 42 inches.

What are standard cabinet door sizes?

When you go to measure the space on your kitchen cabinet where the door will go, you’ll likely get the dimensions 28-inches high by 19-inches wide. This is the standard kitchen cabinet door size. However, most cabinet doors are might a bit smaller so that they’re able to fit properly.

How do you measure a full overlay door?

Overlay refers to how much the door overlaps on the hinge side. You can determine this by measuring the width of the door, subtract the width of the opening and divide that in half. For example, if the door is 1” wider than the opening, that means it overlays 1/2″ on each side, so you would select 1/2″ overlay hinges.

How are frameless cabinet doors measured?

To measure for full overlay cabinet doors on frameless cabinets, the cabinet door needs to be 1/8″ smaller than the cabinet on all sides. So first take a measurement of the cabinet opening, then subtract 1/8″ on all sides.

What does 1 2 inch overlay mean?

1/2″ overlay hinges are the most common overlay of cabinet hinge. These are used in face frame cabinets where the door covers a 1/2″ of the face frame all the way around the cabinet door. These are used in face frame cabinets where the door covers a 1/2″ of the face frame all the way around the cabinet door.

How do you measure cabinet width?

Place your tape measure along the bottom of the cabinet and measure from the back to the front edge. Next, measure the total width. Place your tape measure along the bottom of the cabinet to measure from the left edge to the right edge.

Are kitchen cabinet doors standard size?

What is the standard size of kitchen cabinet doors? Kitchen cabinet door heights are typically between 24 and 30 inches. If the base cabinet features a drawer, the door height below it the drawer is typically 24 inches.

What are standard kitchen cabinet sizes?

Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.

How do you measure for upper cabinets?

Measuring Your Space Upper cabinets are normally 18 inches above the countertop and 30-42 inches high. 3 – Work Triangle – The distances between the three work centers—sink, cooktop, and refrigerator—form a work triangle. To maximize efficiency, the sum of the three distances should be no more than 26 feet.

How do you measure for a corner kitchen cabinet?

Measure from the corner of the wall to the outside edge of the base cabinet on the right side of the corner cabinet. Use a tape measure to get an accurate measurement of the distance. Measure from the corner of the wall to the outside edge of the cabinet on the left side of the corner cabinet.

Are 42 inch cabinets too tall?

8 ) Good designers use 42″ high wall cabinets infrequently and would NEVER use anything higher. Builders and amateurs use these heights to maximize cabinetry not realizing that the higher height looks out of proportion and gives little added space benefit.

Are all kitchen cabinet doors the same size?

It’s true: most kitchens are made in standard sizes. This is probably the most typical kitchen cupboard door size. However, the doors are made slightly smaller so that they fit properly. Typically, you’d be looking at a door 715mm in height and 495mm in width to fit a space of the above dimensions.

How much space should be between upper and lower cabinets?

The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.

What is the standard gap between cabinet doors?

The normal plan is to aim for a 1/8″ gap between pairs of doors that cover one opening.

What is the reveal on a cabinet door?

Door reveal refers to the portion of a cabinet frame left exposed after the door is attached. The size of your reveal is determined by the size of your doors in relation to your cabinet case frame.