Table of Contents

Just follow these steps: Measure the area in feet. Multiply length by width, and then by thickness. Divide the resulting number by 27 to find cubic yards.

## How do you figure cubic yards of concrete?

Essentially you are solving for volume and then converting to cubic yards. For concrete, the formula for volume is as follows: length x width x thickness.Here’s what the math looks like for a 10′ by 10′ concrete patio: 10 x 10 = 100 square feet. 4 ÷ 12 = .33. 100 x .33 = 33 cubic feet. 33 x .037 = 1.22 cubic yards.

## How much concrete do I need for a 10×10 slab?

The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.

## How do I figure how much concrete I need?

Multiply the width times the length times the height (W × L × H), or use our volume calculator to find the cubic feet. Convert the volume to cubic yards from cubic feet. To do so, divide the cubic footage by 27 to get the yards of concrete needed.

## How many yards of concrete do I need for a 24×24 slab?

For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.

## How much does it cost to pour a 24×24 slab of concrete?

A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

## How many square feet is a yard of concrete 4 inches thick?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet.

## How thick should a concrete patio be?

Four inches is the minimum thickness for a concrete patio. You’ll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

## How many 80 bags of concrete make a yard?

If you’re using 80lb bags of concrete, you’ll need 45 bags to make a yard.

## What is a yard of concrete?

How much concrete is in a yard? Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.

## What is the formula for figuring out concrete?

Use the formula. Calculating the volume for concrete requires using three dimensions: length times width (which is area) times the height (thickness) or L x W x H. If you are using feet as your standard unit of measurement, this formula will give you the volume of concrete in cubic feet.

## How thick do I need my concrete?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

## How many yards of concrete can a truck hold?

Each cubic yard costs about $65. However, a fully loaded cement truck will hold 10 cubic yards—and partial “short” loads cost $15 to $20 extra for every cubic yard less than a full load.

## How many bags of concrete do I need for a 10×10 slab 4 inches thick?

The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.

## How many bags of concrete do I need for a 4×8 slab?

As per calculation, for a 4×8 slab at 4 inch thick, generally you will need approximately either 23 bags of 60lb or 18 bags of 80lb of premixed concrete, at 5 inches thick slab, either 29 bags of 60lb or 23 bags of 80lb premixed concrete are required, while at 6 inches thick slab, either 35 bags of 60lb or 27 bags of.

## Why is concrete so expensive?

As more areas become industrialized—and as there grows a greater need for durable building materials to withstand severe weather and long-term wear—the demand for concrete has significantly increased. This alone has affected the price of concrete over the years.

## How thick should a concrete driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

## How many bags of concrete do I need for a 10×20 slab?

Regarding this, “how much concrete do I need for a 10×20 slab?”, at 4 inches thick, generally you will need approximately 2.44 cubic yards or 66 cubic feet or 1.969 m3 (either 144 bags of 60lb or 111 bags of 80lb) of premixed concrete for a 10×20 slab, at 5 inches thick slab, 3.07 cubic yards or 83 cubic feet or 2.35.

## How many square feet is 3 cubic yards?

Cubic yard to Square feet Calculator 1 cubic yard = 9 ft 2 0.037 cubic yard 3 cubic yard = 18.7208 ft 2 0.1925 cubic yard 4 cubic yard = 22.6786 ft 2 0.2963 cubic yard 5 cubic yard = 26.3162 ft 2 0.4141 cubic yard 6 cubic yard = 29.7173 ft 2 0.5443 cubic yard.

## How do I calculate square feet into yards of concrete?

To convert square feet to cubic yards, you simply multiply your square footage figure by the height or depth of the area (in feet) to get a volume measurement in cubic feet. You then divide the total by 27 to get your measurement in cubic yards.

## What is ideal temperature to pour concrete?

Experts agree—the best temperature to pour concrete is between 40° – 60°F. When temperatures dip below 40°F, the chemical reactions that strengthen concrete slow down and can lead to weaker concrete.