Table of Contents
Fortunately, you can get measurements in three simple steps: Measure the inside of the window frame in three places for width: across the top, middle and bottom. Measure for height: at the left, middle and right side. Measure the depth of the window so you know how deep the blinds can be.
What size is a standard window shade?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
How do you measure for shades?
How to Measure for Inside Mount Roller Shades Measure the depth of your window frame, from the front of the opening to the glass. Measure the width of each window. Measure the height of your window opening in three places: left, center, and right. Order at the exact opening size with no deductions.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
How much smaller should blinds be than the window for inside mount?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.
How do I know what size blinds to buy?
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
How do you measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
What sizes do ready made blinds come in?
Standard Sizes for Blinds 36 inches. 48 inches. 60 inches. 72 inches.
How far should Window blinds be from window?
As a general rule: 2″ horizontal blinds such as faux wood blinds and wood blinds need at least 1.5″ inches and 3″ for a flush mount. Honeycomb Shades for instance require less space needing just under 1″ depth and 2″ for a flush mount blind.
How much space do you need between blinds and window frames?
To minimize light leakage the blind should overlap the window opening by at least 1 1/2″ on each side for a total of 3″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
Are blinds true to size?
The gap on either side of the blind will vary depending on the type of blind or shade, but most blinds are cut to be 1/2 inch smaller than the smallest width of the window. When measuring for blinds you should measure the width at the top, middle and bottom and take the smallest measurement.
Can you put two blinds one window?
When you hang multiple blinds in the same window, each blind has its own headrail and is installed separately, so you can operate them individually. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind.
Does Lowes cut blinds to fit?
Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
How do you measure for a mini blind?
Measure the width of the inside edge of the window frame from left to right in three places – the top, middle, and the bottom. Write down the smallest of the three widths down to the nearest 1/8”. If you have a 1/16” or 1/32” increment when measuring, round down to the nearest 1/8”.
Can you hang blinds outside window frame?
Outside mounted blinds and shades give the flexibility of choosing almost any window covering for any situation. That is simply because the window frame doesn’t matter. You just mount the brackets outside of the window frame and hang your blinds or shades so they extend past the frame.
Do you measure windows from the inside or outside?
Run a tape measure from the outside of the frame to the inside and take the measurement from edge to edge of the window frame. Do this in several locations around the window frame and rely on the smallest measurement once again as your final dimension.
