Table of Contents
How much space is needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
When measuring for an inside mount shade Which of the following is important?
The height of the window also needs to be measured in three different places: left, center, and right. These measurements should also only be taken of the inside of the frame for inside mount blinds. Like the width, the height measurement should also be rounded to the nearest ⅛” inch.
What width do blinds come in?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
Does the width of a roller blind include the fittings?
For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How wide should outside mount blinds be?
Round off your measurements to the nearest 1/8 inch. As a rule, the blinds will look nice if they extend about 3 inches beyond each side of the window opening. So a 42-inch-wide window calls for a 48-inch-wide blind that allows for a 3-inch overlap on each side.
What sizes do ready made blinds come in?
Standard Sizes for Blinds 36 inches. 48 inches. 60 inches. 72 inches.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
How Do You Measure blinds UK?
Use a metal tape measure for accuracy. Measure the width at 3 different points as it may not be consistent along the entire recess. Measure at either end and in the middle, and use the smallest measurement as your width guide. For venetian, roman and roller blinds reduce the width by 1cm to allow for smooth extension.
What does exact mean in blinds?
Exact is when you want your blind to be fitted on the outside of the window recess.
How do you measure a double window for blinds?
For two (2) separate blinds in one window, take the smallest width and divide it by 2. (The factory will deduct 1/8″ – 1/4″ from each blind.) For three (3) blinds in one window, repeat the same steps. Then add 1/8” to the width of the left and right blind.
Do you need a drill to install blinds?
Hanging window blinds is super easy, and it doesn’t even require a drill. Having a drill will make it easier, but you can do everything with a screwdriver. And if you need to make a pilot hole to get the screw started, simply tap the end of a nail into the wall with a hammer and then pull the nail back out.
How wide can horizontal blinds be?
These blinds can be anywhere from 70-96” in width, however for sizes larger than that you’ll have to go for 2 or 3 blinds on 1 headrail. They might be a replica of wooden window treatments but have entered the popular space because of the multitude of benefits they have on offer.
What are the different sizes of blinds?
The standard sizes of window blinds ought to match these and can be found in most stores: Picture windows: 1–8 feet high, 2–8 feet wide. Double-hung windows: 36–72 inches high, 24–48 inches wide. Sliders: 24–60 inches high, 36–84 inches wide.
How far do perfect fit blinds stick out?
4) Do your windows have 25mm clearance? ‘Clearance’ refers to the empty space around the window, which needs to be free of obstructions. Perfect Fit blinds are set flush to your window, and the 25mm measurement ensures there is enough space for them to be installed.
Do blinds measurements have to be exact?
Measuring The Size You Want Your Blinds To Be, Not the Size Of The Window Opening. When you order inside mount window coverings from Blinds.com, we always ask for the EXACT size of the window opening, edge to edge. Note: When you measure for outside mount window coverings, the process is different.
How are blind drops measured?
Exact Blind Drop Decide how much you wish to overlap the recess at the top & bottom. We recommend at least 7.5cm at the top, if the blind is required to roll up fully above the window recess. Take the overall drop measurement including the overlap. This is your Exact Blind Drop.
How wide do roller blinds go?
Generally, our standardchain operated roller blinds can reach a maximum of 3450mm wide and our new Premium XL range of roller blinds can reach up to 4700mm wide, which for most people is plenty wide enough.
What is the difference between inside mount and flush mount?
Minimum inside mount depth is the amount of depth required to securely mount the shade/blind inside the window frame. The minimum flush mount depth is the required mount depth needed for the shade/blind to fit fully inside of the window frame, without protruding outward at all.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
