QA

Question: How To Measure For Drapes

Measure the Width If you want your curtains to close and cover the entire window: Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.

How wide should curtains be for 72 inch window?

Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).

What size curtains do I need for a 60 inch window?

For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.

How much wider should curtains be than the window?

How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.

How wide should curtains be for 100 inch window?

For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.

How wide should curtains be for 44 inch window?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

How wide should curtains be for 48 inch window?

Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.

What is the right length for curtains?

How Long Should Curtains Be? Floor-length is the way to go, unless there’s a radiator or a deep sill in the way. Ready-made panels are available in lengths from 63 to 144 inches. Measure from the floor to where you’ll hang the rod, then round up.

How do you choose curtain rod length?

Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.

How do you pick curtain size?

Measure the Width Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.

How do I measure curtain width?

For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).

How far should a curtain rod extend past window?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

How wide should curtains be for 120 inch window?

For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.

How long should curtains be below window sill?

Sill-length curtains stop at the bottom of your window, or a few centimetres further down. They can be the best style for window seats and large window sills, or for rooms where the radiator is situated directly underneath the window. They are best suited to informal, country-style homes and children’s bedrooms.

Is it OK for curtains to drag on the floor?

Curtains that drag on the floor can be a hazard and collect dust more easily. Aim for a middle ground—curtains that hover just above the floor. How to fix it: To find the right curtain length, measure from the floor to where you’ll hang the rod. Curtain lengths come in common lengths like 63, 84, and 96 inches.

When buying curtains is the width per curtain?

You should choose the width that most closely matches the size of your track or pole. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.

Do you double the width for curtains?

The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.

Is there a curtain length between 63 and 84?

When measuring for curtains, keep in mind that curtains usually come in only a few different lengths: 63 inches, 84 inches, 95 inches, 108 inches, and 120 inches.

Should sheers and curtains be the same length?

The length of your sheer curtains can determine whether the room looks stylish or dowdy. For example, sheers hung beneath another curtain should always be at least one inch shorter than the top curtain.