QA

Question: How To Measure Rollerblade Wheels

Use a tape measure or ruler to measure the outside of the wheel’s diameter. Dimensions are in millimeters rather than inches. Next, measure the space between the wheels at the closest point. The larger the wheel size, the faster the skate will be.

What do the numbers mean on rollerblade wheels?

Hardness. Grip, speed and durability are all affected by the hardness of urethane. Typically measured as a Durometer rating, the hardness is displayed on the side of the wheel next to the size. Ratings range from 72A up to 103A; high numbers indicate a harder wheel whereas low numbers represent softer wheels.

What does 83a mean for rollerblade wheels?

Wheels characterized by average speed, good grip, and above all for their ease of use on different types of surfaces. 83/84 –87/88A– used primarily in the disciplines that require fast and wear resistant wheels: slalom, freeride, urban skating, speed skating, powerblading.

What does 90A mean on rollerblade wheels?

Hardness is the A number. This stands for durometer. And this ranges from 68A to 90A . The scale actually goes from 1 – 100 but that’s the range within skate wheels (the scale measures hardness of anything). You’ll want a soft wheel generally indoors, and harder wheels outdoors.

What is the difference between a 78A and a 82A?

The smaller the durometer number, the softer the wheel, and the soft wheels grip much better and ride smoother but don’t last as long. Durometer ratings do not go over a 100A rating. Recreational skate wheel durometers are usually in the 78A to 82A range.

Are 82A wheels good?

82A (Outdoor) – These wheels perform very well on most outdoor surfaces and make a great general-purpose outdoor wheel for sidewalks and asphalt—especially for skaters under 180 lbs. 82As can be used on sealed or painted outdoor surfaces, but they will not perform as well as multi-purpose wheels due to their hardness.

Can I use 82A wheels indoors?

82A & 58MM*32MM: This 82A hardness is great for indoor & outdoor roller skate occasion. Wheels size 58mm diameter give you stability when skating out, while 32mm width increases control.

Does wheel size matter on rollerblades?

The larger wheels roll better and fitness skaters definately notice a difference on long skates. Race skates use very large wheels to help skaters get the smoothest ride with the most efficiency at higher speeds.

How often should you replace rollerblade wheels?

Wheels should last a decent amount of time, even if you skated 4 hours a day for 5 days a week, wheels should last at least a month. If you find yourself replacing your wheels before this and you are not skating that often, then get a different brand or type of wheels (you could go up a durometer number).

Is 80a a soft wheel?

The higher the number, the harder it is. Softer wheels are 75a – 78a. Wheels rated between 80a to 83a are balanced between soft and hard, giving the rider the freedom of control, speed, and grip. These are popular for freeriding, downhill, sliding.

What does 82A mean on rollerblade wheels?

Most wheels on the market range from 74A (softest) to 88A (hardest), where the letter A denotes the durometer scale. However, recreational skaters are normally interested in the narrower range from 78A to 82A. This hardness range provides good control, grip, and a smooth roll for most trail skaters.

What does 84A mean on wheels?

84A (Outdoor/Asphalt) – This is just about the hardest inline hockey wheel you will find. It is absolutely an outdoor wheel intended specifically for sidewalk concrete or asphalt surfaces. Skaters of any size can use this type of wheel on a blacktop or asphalt surface with favorable results.

What are 85A wheels?

A hardness grade of a wheel is stated in “A” (shore hardness). As a rule aggressive wheels are between 85A and 105A. The higher the number, the harder the wheel. Wheels for skating are between 85A und 95A hard. Grindwheels are between 98A and 105A hard.

Are 85A wheels good?

Most recreational indoor skate wheels have a durometer rating of between 88A and 102A because the hardness allows for a fast, smooth ride on most indoor surfaces. Hardness – generally a soft wheel (85A-88A) will grip but won’t roll as fast as a harder wheel (94A-98A). Harder wheels won’t grip as well as softer ones.

Are smaller wheels better for rollerblades?

Bigger wheels suitable for experienced rollerbladers and allow skaters to move faster, while small wheels are roll much slower and are more suitable for beginners. Bigger wheels are mandatory if you seek speed and efficiency.

Is 85A wheels good for outdoors?

✔ 72 mm(Diameter), 24 mm(Width), 8 mm(Axle/Inner Diameter). ✔ Performance-enhancing 85A MODERATE hardness lead to a smooth & long lasting outdoor skating.

Are 76mm wheels good?

68-76mm wheels work best for artistic and figure inline skating. These wheels have an average height and a rounded profile for improved maneuverability and better grip.

What are 78A wheels good for?

78a to 87a are soft wheels appropriate for rough surfaces like sidewalks, roads and other surfaces with pebbles, rocks, and cracks because they provide a smoother ride and grip better.

Are 78A wheels good for outdoors?

78A (really soft): Super grippy, used almost exclusively outdoors. 84A (soft): Hybrid (indoor/outdoor) wheels are usually 84A. They are great for really slippery floors and can be used outdoors. Often a good choice for your first wheels since they are grippy, affordable and versatile.

Is 82A wheels good for outdoors?

An 82A wheel is classed as a hybrid wheel (suitable for most indoor/outdoor surfaces).

How much do Moxi Roller Skates weigh?

Moxi Skates – Beach Bunny – Fashionable Womens Roller Skates Size 1 Closure Type Lace-Up Wheel Size 58 Millimeters Material Marvel aluminum Item Weight 8.1 Pounds.

What wheels are good for street roller skating?

For smooth street skating – choose a wheel from 78-90a for a slightly firmer roll to go faster and still grip the road surface. For indoor skating and for roller dance when you are feeling more confident and want less grip – choose a wheel in the 88a-98a range.