Table of Contents
How are Roman shades measured?
Begin by measuring the width of the window. Measure from left to right and measure at the top, middle, and then bottom of the window. Write down the narrowest width of the 3 measurements down to the closest 1/8″. If you are getting a 1/16″ or 1/32″ increment, round down to the nearest 1/8″.
What are standard roman shade sizes?
Standard sized blinds are anywhere from 24 x 72 – 72 x 72 off the shelf at your local hardware stores.
How long should roman shade be?
Solution: While there are not any official weight and size constraints, this is a point where much thought should be given. We therefore, recommend that the maximum size of a roman shade be 72” wide x 72” in length or a combination that equates to a similar square footage.
Can Roman shades be wider than the window?
Outside roman or roller shades are always wider than the window opening and completely cover it. They are wide enough to overlap window edges and prevent sunlight from entering the room. Most manufacturers actually don’t provide channels for an outside mount since there is no need to use them.
How much wider than window should Roman blind be?
Usually 7 – 10cms (3” – 4”) is the recommended amount of extension beyond the window frame required for the blind to look stylish, and to help prevent light from creeping around the sides.
How should Roman shades fit in window?
We recommend letting your roman shade extend at least 1”-1.5” on each side of window to avoid light seepage. So whatever is the width of your window from frame to frame, add total of 2”-3” to that.
What is the difference between Roman blinds and Roman shades?
Roman blinds create a stack at the top of the window when they are opened or raised. Roman shades do not usually come in different sizes and shapes, so you need to customize them to fit your window openings. Roman shades often hold onto moisture, which results in damp and mould issues.
How do I choose a roman shade color?
If your room is primarily in neutrals, either light or dark, choosing a bold accent color for your roman shades can add an extra pop to the room. Brightly colored shades in a room full of beiges can add a cheerful feel that gives the perfect finishing touch. A strong yellow will set off a room with lots of navy in it.
How do you calculate the measurement for Roman blind folds?
To work out the size of your full fold you need to divide your blind length by this number. For a 24 inch blind, you will divide 24 inches by 2.5. This gives you 9.6 inches for the length of each full fold. Then to get the size of your half fold, simply divide your full fold length by two.
Can Roman blinds be too long?
Approaching the problem of roman shades that are too long is not difficult. If you have roman shades that you love but they don’t fit the length of your window, you can easily make an adjustment and provide some cost effective budget decorating.
How far do Roman blinds hang down?
However, for small or low windows, a roman blind may cover too much of the glass. Roman blinds will cover 22cm-30cm or so in the pulled up position.
How wide should a Roman blind be?
While traditional fabric curtains are typically about 137 centimetres wide, good quality wide roman blinds can be custom made up to 300 centimetres in width. They’re great for contemporary homes including modern cabins where large glazing is all the rage.
Can you hang blinds outside window frame?
Outside mounted blinds and shades give the flexibility of choosing almost any window covering for any situation. That is simply because the window frame doesn’t matter. You just mount the brackets outside of the window frame and hang your blinds or shades so they extend past the frame.
Do Roman blinds look better inside or outside recess?
In summary. In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.
How much smaller should blinds be than the window for inside mount?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.
Do Roman shades block light?
Roman shades: This is a timeless yet versatile style that makes a stylish statement, depending on the pattern, color, and fabric type you choose. They are also an excellent choice for people who love the look of drapes but prefer less clutter. Drapes can be backed with a liner, so they totally block the light.
