Table of Contents
Simply insert a penny into your tire’s tread groove with Lincoln’s head upside down and facing you. If you can see all of Lincoln’s head, your tread depth is less than 2/32 inch and it’s time to replace your tires.
Where do you measure tire tread depth?
The best way to measure your tread depth is to stick the probe into the shallowest groove on the tire, press the shoulders of the probe flat against the tread and then read the result. All gauges should measure both in the 1/32″ United States standard and in millimeters.
What are three ways to check the tire tread depth?
If you see irregular wear, it’s definitely an indication that you might need to have your tires balanced. There are basically three ways to measure tread depth: the quick-and-dirty way, the quicker-and-dirtier way, and the right way.
How do you measure tire tread in Canada?
Hold the quarter between your thumb and forefinger with the quarter head facing down. Select a point on your tire where tread appears the lowest and insert the figurehead first into one of the grooves. If the top of the figurehead is covered by tread, you’re driving with the legal and safe amount of tread.
Should I replace tires at 4 32?
The Tire Rack’s advice is that if rain and wet roads are a concern, you should consider replacing your tires when they reach approximately 4/32″ of remaining tread depth. Since water can’t be compressed, you need enough tread depth to allow the rain to escape through the tire’s grooves.
Is 5mm tire tread good?
Insert the gauge into the tyre tread groove with the coloured scale touching the tyre. If the red is visible the tyre tread is below 1.6mm. This means the tyre is 100% worn and should be replaced urgently. If the green is visible, the tyre tread is above is 5mm and is safe to drive.
How many 32nds is a new tire?
New tires have an average tread depth of 8 to 9 millimeters (10/32 to 11/32 inches). As you drive, the tread will wear down. A tire with a tread depth below 1.6 millimeters (2/32 inches) lacks grip. Braking distance and vehicle control are impaired.
How many years do tires last?
On average, people drive between 12,000 to 15,000 miles a year, which means the average good quality all-season tire will last somewhere between three and five years, depending on maintenance, driving style and conditions, etc.
What is the penny trick for tires?
The Penny Test Insert a penny with Lincoln’s head upside down into a tire tread groove. If Lincoln’s head is covered and no longer visible between the grooves, your tread depth is good. If you can see all of Lincoln’s face, it means that the tire tread is 2/32 inches deep or less and it’s time to replace them.
How do you measure tread with a penny?
Tire tread is composed of several ribs. Turn the penny so that Lincoln’s head points down into the tread. See if the top of his head disappears between the ribs. If it does, your tread is still above 2/32” , If you can see his entire head, it may be time to replace the tire because your tread is no longer deep enough.
How do you measure tire tread with a Canadian quarter?
The quarter test A classic way to measure winter tire wear is to use a quarter. Insert a 25¢ Canadian coin in one of the grooves with the caribou facing down. If you see the tip of its nose, it means the tread depth no longer meets 6/32”, so the tire probably won’t last all winter or 10,000 km.
Is 50 percent tire tread good?
If the tread reaches the bear’s paws, your tires are probably pretty new. If it reaches all the way across the silver, they’re about 50% worn. If your tire tread reaches only about half-way into the letters, it’s time to shop for new tires.
Is 5 32 A good tire tread depth?
Tread depth what to do 6/32” Your tire’s tread depth is sufficient for 3-seasons but nearing minimum for a winter tire. 5/32” If wet roads are a concern, consider replacing your tires. 4/32” – 3/32” Seriously consider replacing your tires as soon as possible. If it’s a winter tire, 4/32” is the minimum.
What is the minimum tire tread depth in Ontario?
The condition of your vehicle’s tires is important. Worn or damaged tires can affect your ability to drive safely. It is best to replace tires before the tread depth reaches the regulatory minimum of 1.5 mm.
Why do new car tires wear out so fast?
The tires that came with your last new car were not designed by Michelin, Goodyear, Bridgestone or any other tire manufacturer. They were designed by the manufacturer of your car. This is because virtually all auto manufacturers specify very soft rubber which means they wear out too fast.
How often do tires need to be rotated?
This common maintenance task—which should typically be done every 5,000 to 8,000 miles—isn’t one you should ignore. It may seem minor, but remember: Tires are the only thing that comes between your 2-ton vehicle and the road.
How many miles are tires good for?
Your tires should last 50,000 to 60,000 miles on average. But that really depends on the manufacturer. Some manufacturers build their tires to last up to 80,000 miles, while some design their tires to last as little as 30,000 miles. You can see how many miles to expect out of a tire by checking its treadwear rating.
