QA

How To Measure To Hang Curtain Rods

To determine the length of the rod, measure the width of your window and add eight to twelve inches. Each curtain panel should be at least as wide as your window.

How do you measure for curtain rods?

Use the largest of the three as your window’s width. If you don’t have much space to either side of your window, look for a curtain rod that is the same width as your window. However, if space permits, we recommend that your curtain rod extend five inches past your window on either side.

Where should curtain rods be placed?

A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

How far should a curtain rod be from the wall?

General Installation Recommendations. When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

How much wider than window should curtain rod be?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

How high do I hang curtain rod for 84 inch curtains?

The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.

What is a standard curtain rod size?

Curtain rods are available in a variety of lengths. The most standard sizes you’ll find in stores are 28-48 inches, 48-84 inches, 66-120 inches or 120-170 inches. These ready-made options cater to most common window sizes, but it’s best to purchase adjustable rods that can accommodate a broader range of window sizes.

How are rods measured?

rod, old English measure of distance equal to 16.5 feet (5.029 metres), with variations from 9 to 28 feet (2.743 to 8.534 metres) also being used. It also denoted just one square rod, or 272.25 square feet (25.29 square metres). The rood also was a British linear unit, containing 660 feet (201.2 metres).

How far from the floor should curtains hang?

The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.

How far should curtains hang below window sill?

While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.

Which side of curtains should be inside on door?

But the fabric side (also described as the woven or rough side) is made to face the window because of the durability. Face the fabric side out to avoid yellowing or sun damage, which will preserve the lifespan of your curtains.

How many brackets do I need for curtain rod?

Count how many brackets are included with the curtain rod. As a general rule, there should be at least one bracket for each outside corner of the window, and one bracket in the center. Add more brackets if the expanse between the middle and outer brackets is more than three feet.

Are curtains supposed to touch the floor?

Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.

How wide should curtains be for 36 inch window?

Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full. Always round up to the next full number.

Are 84 inch curtains long enough?

Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.

Are 84 inch curtains floor length?

Floor length: Long curtains that go from above your window frame all the way to the floor to create a traditional, formal look. Typical curtain length for this style is 84 to 96 inches; these curtains will fall about 1/4-inch above the floor.

How wide should curtains be for 72 inch window?

Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).