Table of Contents
How do you mount a base station valve index?
Screw the ball and socket joint into the back of the base station. Plug the power cable into the back of the base station. Screw the ball and socket joint into the wall mount. Aim your base station toward your play area.
Can valve index base station be mounted upside down?
They do work upside down..or even sideways.
Where do you mount index base stations?
Base Stations should be aimed and angled toward the center of the play area. In the ideal setup, Base Stations should be above head height (at least 6.5 feet / 2 meters), angled down by 30-45 degrees, positioned no more than 16 feet / 5 meters apart, and place opposite one another in separate corners of the play area.
How do you mount a base station?
Installing the base stations Mount the base stations diagonally at opposite corners of your space. Adjust the base stations so that the front panels are facing toward the center of the play area. Attach the power cables to the base stations, and then plug them each into a power outlet to turn them on.
Can Command Strips hold base stations?
Command strips (large ones) are rated to hold over 2kg, and I currently use them for a lot of heavy art work in my flat, and even hanging nanoleaf light panels. However, these base stations have a motor in, so I’m unsure if it’d be stable enough!Nov 28, 2019.
What is a valve index base station?
To track your movements in virtual reality, the Valve Index headset utilizes SteamVR Base Stations 2.0 or compatible Lighthouse 2.0 tracking stations that come with HTC Vive Pro. Although for seating and standing-only VR experiences one base station can be enough, two stations are recommended for optimal tracking.
How do you hang a lighthouse without drilling holes?
Probably the best way to get your lighthouses off the ground without drilling holes is by attaching them to these adjustable stands from Fovitec (about $46 for two). They can be set up in seconds, reach above seven feet in height, and a ball swivel at the top lets you adjust the lighthouse as needed.
DO base stations need to be upright?
Mount the base stations diagonally and above head height, ideally more than 2 m (6 ft 6 in). Each base station has a 120-degree field of view, so it’s ideal to adjust its angle between 30 and 45 degrees to fully cover your play area.
Can the lighthouse be upside down?
Known as Ireland’s only ‘upside down’ lighthouse, be sure to take a tour of it and embrace the views from its cliff-face vantage point to get a real insight into lightkeeping life.
What is Lighthouse VR?
Lighthouse is a laser-based inside-out positional tracking system developed by Valve for SteamVR and HTC Vive. It accurately tracks the position and orientation of the user’s head-mounted Display and controllers in real time. Valve plans to make Lighthouse freely available to all hardware manufactures.
Can you use 1.0 and 2.0 base stations together?
No, they are not compatible. SteamVR Base Station 2.0 has a different method of syncing. Use only the same versions of the base stations in your play area so that your setup will work correctly.
Do 2.0 base stations need to see each other?
V2 base stations include identifying information on the actual laser beam, meaning there is no need to sync with other stations, sensors know what hit them from the actual strike.
Do Index base stations need USB?
Base Stations are passive beacons (just like the real lighthouses), they don’t need to be connected to your computer. Just plug the power and that’s it.
What ports do you need for valve index?
Valve Index Recommended VR Specifications: Video Output: DisplayPort 1.2. USB Ports: 1x USB 2.0 port (USB 3.0 required for camera passthrough), 1x DisplayPort v1. 2. OS: Windows 10, SteamOS, Linux.
How good is the valve index?
The Index controllers are technically impressive, and easily the most advanced we’ve seen in a consumer headset (enterprise-level and development hardware have access to much more precise and expensive motion tracking, but they’re out of reach of most users, and most games can’t take advantage of them).
How well do Command Strips work?
These sticky Velcro strips will cost a little more than nails, but they do their job and leave your walls completely smooth with no holes or residue left behind. The result is a beautiful, securely hung picture and a wall in pristine condition. So yes, Command Picture Hanging Strips are worth it.
How do the base stations work?
What is a Base Station? Base Stations power the presence and immersion of room-scale virtual reality by helping the Vive headset and controllers track their exact locations. According to XinReality, “Base Stations perform this function by constantly flooding the room with a non-visible light.
Are valve base stations wireless?
Now with wide-area tracking, base station 2.0 powers the presence and immersion of room-scale, virtual reality by helping the Vive Pro or Vive Pro eye headsets and Controllers track their exact locations. Features wireless syncing.
How do you mount a Vive lighthouse?
Mount the base stations diagonally and above head height, ideally more than 2 m (6 ft 6 in). Secure the base stations in a location where they can’t be easily jostled or moved. Each base station has a 120-degree field of view, so it’s ideal to adjust its angle between 30 and 45 degrees to fully cover your play area.
Do you need Bluetooth for base station?
The SteamVR app on your computer communicates with the base stations through Bluetooth. You need the original link box to be able to update the base stations’ firmware or configure its settings. You just need to connect it to your computer’s USB port and plug in its power adapter.
HOW DO base stations connect to PC?
Using a micro-USB cable, connect the base stations to one of your computer’s USB ports one at time. While pressing the Channel button at the back of the base station, plug in the base station’s power adapter. Once the base station is detected by the SteamVR app, the firmware update will start automatically.
Why is rathlin lighthouse upside down?
The cliff was too high for the light to be effective so it had to be placed some way down the cliff, making the lighthouse upside down! The light was first lit on 10th March 1919 and was watched over by lighthouse keepers until 1983 when the lighthouse was automated. The light is still in use today.
