QA

Question: How To Move A Refrigerator

How do I prepare my refrigerator for moving? Empty out the fridge. Disconnect water lines and wiring. Defrost the fridge, if necessary. Remove the doors, if necessary. Protect the floors, walls, and refrigerator. Physically move the fridge with a dolly. Secure it safely in the truck. Reassemble and reconnect in the new house.

Can I move a refrigerator by myself?

You can save money by moving a fridge yourself. Not only are refrigerators cumbersome and bulky, but they’re also costly as well. However, you can make the job much easier by knowing how to move a refrigerator properly. Depending on your situation, sometimes it might be best to leave this job to the professionals.

What’s the best way to move a refrigerator?

A refrigerator should really only be transported in an upright position. If you are deciding how to transport a refrigerator in a pickup truck, trailer or moving truck, remember that it’s best to keep the refrigerator upright, and rent or borrow a vehicle that will allow for that positioning.

Can you move a refrigerator by laying it down?

Can you lay a fridge or freezer down to move it? Fridges and freezers are best transported upright to keep the cooling refrigerant in its right place. With a lot of padding underneath, lie your fridge or upright freezer down and secure it with straps so it can’t move during transit.

Can you move a refrigerator right after you unplug it?

You should let it stand unplugged, in an upright position, for at least 4 hours to allow its compressor oil to settle. You can plug your appliance in once 4 hours have passed. Moving built-in appliances is a little less straightforward as you will first need to remove unit doors from the appliance.

How hard is it to relocate a fridge?

Moving a refrigerator is hard enough without its doors flying open during the move. So before placing your refrigerator on the dolly, wrap the appliance with either a moving strap or strong rope. Make sure the rope is tied tightly and the doors are securely closed before sliding it onto the dolly.

How do you wrap a refrigerator for moving?

Secure Your Refrigerator for Moving You don’t want anything to slide around inside the fridge during the move and break. Simply wrap them with blankets, towels, or bubble wrap. After that, close the door shut with a rope or a strap so it will not open once it’s on the dolly.

Can you transport a fridge on its back?

If you do lay your fridge down to move it, you can lay it on its front or side, but it’s not recommended that you lay it on its back – the weight of the fridge’s body on its working parts could damage them, even if they’re not exposed.

What happens if you lay a refrigerator on its back?

When a refrigerator is horizontal, the oil from the compressor will start to move out and into the coolant lines, clogging them. Besides this, placing a refrigerator flat on its back is a major no-no: the weight of the fridge can damage its internal parts, even if they’re not exposed.

How do you fix a refrigerator that was laying down?

If your refrigerator was on its side for more than 24 hours, let it stand upright for 24 hours before plugging it in. Allowing the fridge to stand in its normal position before plugging it in will give the oil time to flow back into the compressor where it belongs.

Why do you have to wait 24 hours to plug in a fridge?

Its because the compressor lubrication oil could get into the cylinder of the compressor and if not given plenty of time to drain back into the oil sump at the bottom of the compressor, could cause major compressor valve damage on start up. 2 or more hours is a good rule to observe.

How long do you have to wait after transporting a fridge?

If it’s been on its side for 30 minutes during transit, wait 30 minutes once it’s back upright. If it’s been on its side for more than a day, you should wait 24 hours.

How long should I wait to turn on a fridge after moving it?

If it was on its side for more than a day, leave it standing upright for 24 hours before running the refrigerator. If laying on its side just briefly to service, clean or adjust, just a few minutes of stand time will be enough.

How long should you wait after moving a refrigerator?

When you plan to restart the refrigerator after moving it, wait at least twelve hours before plugging in to ensure that any lubricant or coolant is settled into place and isn’t going to gush out or damage the function of your refrigerator when plugged back in.

How do you move a fridge to a house?

How do I prepare my refrigerator for moving? Empty out the fridge. Disconnect water lines and wiring. Defrost the fridge, if necessary. Remove the doors, if necessary. Protect the floors, walls, and refrigerator. Physically move the fridge with a dolly. Secure it safely in the truck. Reassemble and reconnect in the new house.

How do you move a fridge side by side?

When moving the refrigerator for cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the refrigerator straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

How do you move a fridge without damaging the floor?

Here are the steps you can take to move your fridge with ease: Defrost Your Fridge First. Remove the Shelving & Secure the Doors. Obtain a Dolly or a Hand-Truck. Use Folded Towels or Cloth Rugs to Protect the Floor. Loading the Fridge onto the Dolly or Hand-Truck. Navigate Through Doorways and Onto the Moving Truck.

Can I move my fridge to another wall?

If there is already plumbing on the wall where you’d like to place the fridge, it can be repurposed for the refrigerator or you can purchase a water line installation kit and slice into the existing lines.

How much does it cost to move a fridge?

The distance they are moving the appliances will determine the total duration, but we suggest you estimate at least 2 hours. With 110 per hour as the approximate rate, you should be spending about $220, excluding taxes and other extra fees.