QA

Quick Answer: How To Order Curtains For Windows

How do I know what size curtains to buy?

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

How wide should curtains be for 72 inch window?

Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).

How much bigger should curtains be than the window?

How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.

How much wider Should curtain rod be than the window?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

When ordering curtains is the size per curtain?

All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.

How far below window should curtains hang?

While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.

When buying curtains is the width per curtain?

You should choose the width that most closely matches the size of your track or pole. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.

What size curtains do I need for a 60 inch window?

For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.

How do I measure a window?

Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.

How wide should curtains be for 48 inch window?

Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.

How far should curtain Pole be either side of window?

For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again. Then cut the pole to your required width (excluding finials).

How far should curtains stick out from wall?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

Should curtains go to the ceiling?

Hanging your curtains at ceiling level maximizes the light that shines through your window and it makes the room feel larger because the walls look taller. This works well in a small space, but may not be ideal in a room that is already too large.

When you buy curtains do they come as a pair?

While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.

Do you measure each curtain?

Most ready-made curtains come in these widths: 117cm (46”), 168cm (66”) or 228cm (90”). To work out which one you need, measure the length of the rail or pole (between the finials), not the window. This measurement is the width of each curtain and means they’ll have a lovely, full gather even when closed.

Do curtains have to touch the floor?

Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.