QA

Quick Answer: How To Paint Hardiplank Siding

Some useful painting tips Remove dirt and mildew (bleach is good for that) as failure to do so will leave the stain looking dirty or muddy. Do not prime (it should come pre-primed) Seal cracks with a quality acrylic caulk. Use 100% acrylic paint or acrylic latex paint. Apply up to two coats of paint.

Do you need to prime Hardie siding before painting?

1. Prepare to paint. Whether you’ve got a ColorPlus finish or custom paint on your existing Hardie siding, you don’t have to use primer when re-painting Hardie. All you should have to do is rinse your siding (use a garden hose – no pressure washers here!) to clean off any dust or dirt.

Can Hardie plank siding be painted?

Painting Hardie Plank siding is not only possible, it’s a great way to refresh, update and maintain the exterior of your home. A professional exterior painting expert will have many years of experience painting Hardie Plank and will know the right paint and tools to get the job done right.

What is the best paint for HardiPlank?

Hardie siding can last up to twenty years if you get the right paint. You can consult a professional exterior painter for their recommendations here, but acrylic latex or 100% acrylic paint will be the best choice for this project.

Should I caulk HardiPlank?

For regular Hardiplank lap siding (the kind you paint AFTER installation), caulking at butt joints is optional. This from installation instructions: A high quality, paintable caulk is recommended.

What happens if you dont paint Hardie board?

1. Hardie Siding Problems | Maintenance. If you don’t paint the siding every 7-10 years, on average, it’ll start to fade and/or peel, crack or chip. Compare that to other siding products, such as vinyl, which require no maintenance whatsoever.

What kind of paint do you use on Hardie board siding?

Use 100% acrylic paint or acrylic latex paint. Apply up to two coats of paint. Use a paintable caulk made to bond to fiber cement and your trim.

Can you buy James Hardie paint?

Paint can be purchased directly from the James Hardie color page. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project.

What brand of paint does James Hardie use?

We’ve used Sherwin Williams Emerald paint on Hardie Board and had good success. Sherwin Williams “Emerald” is their top of the line acrylic latex exterior paint. Sherwin-Williams Loxon Masonry Primer can be used to prime Hardie Board before painting.

Can you use a roller to paint Hardie board?

A good quality roller will help you apply in even, smooth strokes, covering as much space as possible at one time. Just don’t hurry this process; it’s best to go slow. Painting is an art! When applying paint to your fiber cement siding, don’t make the mistake of putting too much paint on your brush.

Does HardiPlank need to be primed?

Using The Proper Materials and Paint- For fiber cement or HardiPlank siding, a very good latex primer should be used to prepare the surface for paint. For exposed composite siding, it is important to use a primer that matches the correct PH level.

Can I use oil based paint on Hardie board?

o The use of oil based paints on fiber cement could result in increased surface roughness, loss of adhesion, cracking or excessive chalking. James Hardie does not specify paint and will not warrant or accept liability for the performance of field applied finishes.

How long does pre painted Hardie board last?

(The industry refers to this process as blow and go) And, the average paint life with that process is typically 6 to 8 years if the prep and application is performed correctly.

Do you paint or stain Hardie board?

Hardiplank siding is a long-lasting, fireproof building material that resembles natural wood. Because it is a concrete-based product, it cannot be stained in the traditional sense.

Can you pressure wash hardiplank?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding.

Do you nail or screw Hardie board?

What is the correct fastener pattern for installing HardieBacker® cement board? Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs.

Can you nail into hardiplank?

James Hardie Building Products recommends keeping nails or screws at least 3/8 inch from the end of a plank. Drill pilot holes, at each mark, one-quarter to one-half inch deep, to make it easier to insert screws and prevent cracking the siding.

Does Hardie board increase value of home?

James Hardie Siding Does Increase the Resale Value of Your Home. Whether or not if you’re deciding to sell your home, having James Hardie Siding is going be one of the best investments you’ll ever make. According to Family Handyman, you can recoup as much as 76% of the upfront cost of it upon the sale of your home.

What are the cons of Hardie board?

Hardie board is close, but the one drawback of Hardie board siding is upfront costs. This material is heavier than vinyl, which means installation requires more labor and specialized installation. The material itself is also more costly than most vinyl options.

Do I need house wrap behind Hardie siding?

With fiber cement siding, the heavy material may compress the wrap so it’s extremely important that a non-woven wrap is used. This is because the heavy siding may lead to a build-up of moisture behind it, which in turn, can lead to mold growth and wood rot if that moisture is not properly addressed.