QA

How To Paint Resin Miniatures

Spray the miniature with primer and let it dry for 15-30 minutes. Use white primer if you’ll be painting with light or bright colors. Use black primer if you’ll be painting with darker shades. Shake the can of primer really well, then spray the miniature with a thin coat from about 12 inches (300 mm) away.

What kind of paint do you use on resin?

What Kind of Paint to use on Resin. The best paint to use on the resin is acrylic paint. First, make sure to prime the surface, then paint with acrylic paint. The paint for resin will adhere to the surface, you can also spray a finish to make your project last longer.

Do you need to prime resin minis before painting?

Spray primer really is the best bet, and I’d recommend priming black. In all honesty, black spray paint will work just fine, as long as it’s not going to melt the plastic.

How do you paint 3D printed resin miniatures?

A spray-on primer is the best way to paint your printed parts because it quickly covers a surface with an even coating. Brush-on primers are available, but they are tricky to work with and better for fine touch ups. For best results, choose a primer and paint that are plastic compatible and from the same brand.

How do you get paint to stick to resin?

Tip 1: The easiest way to paint resin is to use a primer. Grey or white primer is best if you’re using mixed colors. I prefer using a spray primer, as it helps so that you don’t apply too much and change the look of the resin. However, you can also use a paint-on primer.

Can you paint resin on with a brush?

Generally speaking, foam roller brushes work best at applying epoxy products. This is due to the uneven application that can sometimes occur with bristle brushes. Always be sure to follow the manufacturer’s instructions for mixing the epoxy resin and hardener.

Can you paint resin miniatures?

Because of the high quality sculpts, painting a 3D printed miniature made with a resin printer is also the same process as painting any other regular miniature or scale model kit. For a while, making finely detailed miniatures with a 3D printer was difficult with almost any consumer-grade 3D printer.

Do you need to prime plastic minis?

Do I Need to Prime Plastic, Metal, or Resin Miniatures? Priming a model helps paint stick and gives any paint job long-term durability. Without a primer, even the very best acrylic paint will chip and flake off in no time during handling, transportation, or even while you are painting the model!.

Can you paint 3D printed miniatures?

Although a cool stuff, 3D printed models are usually monochromatic. To make them look more like their prototype, it is possible to paint them, using any quality acrylic paint. The process can be time-consuming but, it’s worth the effort. Painting 3D prints is not impossible.

Can 3D printed resin be painted?

Both acrylic and water-based paints work as well, but several layers may be needed. Mammoth resin, standard resin, gray resin, and high-detail resin will be easier to paint. Also, start with a primer first to smoothen the surface of your model. This way, the visible level structure of the 3D print process decreases.

How do you sand 3D printed resin miniatures?

Yes, you can sand resin 3D prints but you should make sure to cure your resin 3D print before you start sanding. It’s recommended to do dry sanding with low 200 grit, then wet sanding with higher grits of sandpaper. You should move up gradually from around 400 to 800 to 1,200 and above as desired.

Do you wash resin models?

You will need some warm tap water and a mild abrasive cleaner, such as washing-up liquid, don’t use any bleach. Simply place the parts into the soapy water and leave them to soak for 5-10 minutes, then thoroughly scrub each part with an old toothbrush. When finished dry each component.

Will paint stick to epoxy resin?

Generally, epoxy primers and LPU paints are compatible with epoxy resin coatings and may even chemically bond. However, some of the alkyd enamels and other one part paints and varnishes may not properly dry on epoxy resin coatings.

Can I use spray paint on epoxy resin?

To use spray paint as your color additive in your resin, you can use an epoxy spray paint which is easier to mix as it contains epoxy resin in it already, such as Rust-Oleum.

Can you paint resin with nail polish?

Mixing nail polish with resin is not an effective way to color resin. Painting colored nail polish on cured resin looks like it would be a good option for coloring resin charms. 4. Clear polish should definitely not be used to color resin.

What is resin primer?

Resincoat Epoxy Primer is a low viscosity solvent free epoxy primer used to seal and prepare surfaces prior to painting. It is an industrial twin pack primer that absorbs into the existing substrate, cures stronger than concrete itself and seals effectively.

How do you color resin?

First mix resin and hardener thoroughly in the mixing ratio recommended by the manufacturer. Once you have mixed the two components carefully, it is time to add the paint. Add a small amount of paint concentrate or pigments to the mixture and mix well. Repeat this process until you have achieved the desired shade.

Can you paint resin onto something?

Yes, ArtResin epoxy resin can be painted on once it’s dry. Some artists mix resin with pigment or dye and use it like paint on top of a first cured layer of resin. You may want to check out one of our Feature Artists, Bruce Riley, who works this way.

Do Warhammer minis need primer?

Prime/undercoat the miniature(s) The undercoat (or primer) is necessary because it will make your paint stick much better to the plastic and it will create a more even surface for you when you paint.