QA

Question: How To Patch Holes Around Pipes

How do you cover a hole around a pipe?

Apply caulk or expanding foam around the hole. If the gap around the pipe is wider than an inch, use a solid material like sheet metal, plywood, or rigid foam to fill the hole. Fasten in place with adhesive or short screws and seal with caulk or spray foam.

Can I use expanding foam around pipes?

DO use expanding foam to silence noisy water pipes. Spraying some expanding foam around the pipe will stabilize it and keep it from banging and rattling.

How do you seal around pipes to prevent mice?

Fill small holes with steel wool. Put caulk around the steel wool to keep it in place. Use lath screen or lath metal, cement, hardware cloth, or metal sheeting to fix large holes. These materials can be found at your local hardware store.

How do you fill gaps around copper pipes?

You can use Flex Seal, expanding foam, or silicone sealant to fill and seal the gaps and cracks around your copper pipes. These products will effectively fill up the space in between your pipes and walls to ensure that no water, air, moisture, and small insects can get in.

How do you cover a pipe hole under a sink?

You can fill holes around pipes under a kitchen sink (or any other sink in your home) by filling them with steel wool or copper wool and then sealing the patch with caulk, says the Centers for Disease Control and Prevention. For best results, use silicone caulk.

Where should you not use expanding foam?

When NOT to Use Spray Foam Insulation For areas that are too close to electrical boxes: For areas too close to ceiling light boxes: Open-cell spray foam on your roof: For closed-cavity spaces: If you have a history of skin, respiratory, or asthma problems:.

Is expanding foam OK around copper pipes?

Moisture curing, polyurethane expanding foam, specifically developed for filling gaps around pipes and other plumbing applications. Adheres to most sanitary and plumbing materials; PVC, CPVC, copper, cast iron, chromed copper and chromed brass. Resistant to water, heat and ageing.

Can you spray foam around copper pipes?

Don’t use spray foam such as Great Stuff around heat sources: it will melt and produce toxic fumes. BTW, the reason the holes are so big is probably because there used to be three-inch pipes there.

Do Brillo pads stop mice?

No, it will not stop them. They navigate by memory, landmarks, sense air flow through cracks and openings, and smell. They leave a urine trail to follow to return to the opening or food source. The expanding foam works well as it blocks air.

Will expanding foam stop mice?

The quick answer to this question is yes, spray foam will work to keep out mice and other pests. If it’s cold outside and your home is leaking heat, that mouse is going to find that leak and think it’s a warm invitation into the house. Foam insulation in your home will not solve a pest problem that already exists.

What scent will keep mice away?

Mice can be easily avoided around your household by simply adding the scent of peppermint in corners where they congregate. Yes, that’s right, peppermint.

Can you put silicone around copper pipes?

Silicone. Silicone is the type of caulking that seals metal surfaces, such as copper. One hundred percent silicone caulking works well for most applications involving copper, including those that sustain high heat, such as flashing around chimney outlets.

Does Flex Seal work on copper pipe?

Flex Seal will work on roofs, gutters, skylights, windowsills, flashings, downspouts, foundations, awnings, chimneys, vent pipes, RV’s, campers, trailers. It can be applied to wood, copper and other metals, concrete, masonry, glass, fabric, plastics and much more.

Can you caulk around water pipes?

If the pipes under your kitchen sink are exposed, you may not want to fill the gaps around them with spray foam, which isn’t the most attractive material in the world. You can use caulk to fill gaps less than about 1/2 inch wide, and you can fill wider gaps by stuffing them with steel wool and caulking over it.

Is it OK to plaster over copper pipes?

Yes. All copper pipes should be covered with something, especially if sand & cement is used. A bit of movement is better as you say. Some plaster doesnt do any harm to copper.

How do you cover exposed water pipes?

12 Creative Ways to Hide Plumbing Pipes Make the Plumbing Pipes Stand Out (or Blend in) Build Shelving to Hide the Pipes. Use Decorative Pipe Covers. Sink Skirts & Cabinets Can Hide Bathroom Pipes. Box the Pipes In With Wood & Paint. Add Some Interesting Joints & Curves. Make the Pipes Serve a Functional Purpose.

How big a gap can expanding foam fill?

The Big Gap Eraser GREAT STUFF™ Big Gap Filler Insulating Foam Sealant is a ready-to-use, expanding polyurethane insulating foam sealant that fills, seals and insulates gaps up to 3 inches.

Is expandable foam waterproof?

Is there a waterproof expanding foam? Yes, some expanding foam is designed to be waterproof. Certain products are even made specifically for building ponds, fountains, and other outdoor water features.