Table of Contents
Use the largest of the three as your window’s width. If you don’t have much space to either side of your window, look for a curtain rod that is the same width as your window. However, if space permits, we recommend that your curtain rod extend five inches past your window on either side.
How Big Should curtain rod be?
A good rule of thumb is to have the curtain rod extend three to four inches from each side of the window frame. Using a pencil, make a small mark at the appropriate width on the wall. You may want to use a level to make sure the marks are straight. Accounting for Finials.
What size curtain rod do I need for a double window?
48-84″ Curtain Rods The most common size of a double-hung window is 24″-48″. Once you add the extra inches to the side for curtain rod installation, the smaller size rod will be too small for the largest of these common windows. And often, these windows are hung in pairs.
How far should a curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How do you pick curtain size?
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
Do curtain rods have to match light fixtures?
You do not need to match metal finishes in your lighting, in your hardware, in your faucets, or curtain rods. One important trick here is to keep all your lightings, whether recessed can lights,pendants,or chandeliers,no more than 6 to 7 feet from each other.
What is a double curtain rod for?
Although very similar in design to single curtain rods, a double curtain rod allows you to layer more than one drapery panel or curtain for a more enhanced and dramatic look. Most typically, people layer a sheer curtain first and then a regular curtain on top to block out light.
Do curtains have to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
How much wider than window should curtain be?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How far should curtain rods stick out from wall?
General Installation Recommendations. When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
How far should curtain Pole be either side of window?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again. Then cut the pole to your required width (excluding finials).
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How far should curtains be off the floor?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
Should all the light fixtures match?
As we’ve said before — but it bears repeating — you do not need to match metal finishes in your lighting, in your hardware, in your faucets, or curtain rods. One important trick here is to keep all your lighting, whether it’s recessed can lights, pendants or chandeliers, no more than 6 to 7 feet apart from each other.
Can you mix chrome and brushed nickel light fixtures?
DON’T worry if major contrast isn’t for you. Hues that are similar can also work very well together. Mixing finishes like polished chrome and polished nickel can add subtle dimension to a space. DO call attention to an accent piece by contrasting the style as well as the finish.
Can I mix black and bronze light fixtures?
We often get questions about which metals work best together, and the answer is: They all can go together…as long as there is clear design intent! Metals are meant to be mixed, so don’t worry too much about whether they’ll “go together” and instead make sure each finish is a thoughtful addition to your space.
Should sheers and curtains be the same length?
The length of your sheer curtains can determine whether the room looks stylish or dowdy. For example, sheers hung beneath another curtain should always be at least one inch shorter than the top curtain.
Do I need 2 curtain rods?
At minimum, you will need to buy two rods, two pairs of finials or end caps (we recommend end caps for the back rod and finials for the front or two pairs of end caps), two double curtain rod brackets, and two sets of rings from the same size, color and collection to create a functional and beautiful double curtain rod Mar 23, 2021.
