QA

How To Pressure Wash Fence

Can you pressure wash a wood fence?

Rinse Using a Pressure Washer Use a low-to-medium pressure spray pattern when rinsing the detergent. Wood is soft, and you don’t want to cause any damage or streaking on the surface of your fence. Repeat the process of applying detergent and rinsing it clean for each section of fencing.

Can you clean fence with pressure washer?

Luckily, wooden fences are easy enough to clean and unless you own acres of fenced land, it can also be a relatively quick task. To clean a wooden fence, all you need is a pressure washer. Use circular motions to buff the dirt away then rinse the fence with fresh water.

How do you pressure wash a wooden fence?

How to Clean a Wood Fence Wet. Use a 25-degree tip on your pressure washer to rinse a few boards of your fence at a low setting. Prepare pressure washer. Apply Simple Green. Scrub stained areas. Let it sit. Flush pressure washer. Rinse. Repeat until clean.

Should you pressure wash your fence?

Yes. Pressure washing fences before painting is recommended because it will remove dirt so it is not “painted” onto the fence. How much psi do I need to clean my fence? You need at least 1800 PSI to effectively clean a wood fence.

What is the best way to pressure wash a fence?

Start with a green-tipped, 25-degree nozzle. This nozzle is the best for all-purpose pressure washing, but if you encounter tough grime or heavily stained areas of the fence, you may need to switch to a yellow-tipped, 15-degree nozzle.

How long does it take to pressure wash a fence?

Pressure washing a 500-square-foot fence takes about 2 to 2.5 hours.

How do I make my fence look new?

All you have to do is remove the surface layer of aged wood cells to expose a fresh layer of wood. With a power washer, it’s as easy as washing your car. Then apply an exterior wood oil fence stain to preserve this new layer of wood. It’ll prolong the life of your fence to boot.

Should you pressure wash your fence before staining?

More often than not, it is not a good idea to power wash a fence before staining it. Power washers can force the mold and mildew (the greying color of the fence) deeper into the wood pickets. This causes the wood to deteriorate quicker. Power washing a stained fence can create divots on the surface of the wood.

How do I get green algae off my wood fence?

Mix two parts warm water and one part household bleach into a bucket. After you’re done, put on your rubber gloves and work clothes. Take your scrub brush and dip it into the bucket with the cleaning solution. Try to get rid of as much green algae spots off the fence as possible.

Does pressure washing damage wood?

A pressure washer is a straightforward machine that can clean very well with only water. However, it can ruin your deck if it’s not used properly. If you use it with too much jet pressure or place the tip too close to the surface of your deck, you can deeply etch the wood and cause the fibers to splinter.

How much should I charge to power wash a fence?

The average cost to pressure wash a fence ranges from $0.31 to $0.48 per square foot or between $155 and $290 for a 6-foot tall 100-foot long privacy fence. Once you’ve powered washed your fence, consider staining for an additional cost of $0.87 to $1.85 per square foot, or an extra $389 to $923.

How long should you wait to stain a fence after pressure washing?

After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.

How can I make my old wood fence look better?

15 ways to Improve the Look of your Wooden Fence WITHOUT painting the whole thing 1.1 1) Paint your Fence Posts. 1.2 2) Straighten and Fix Warped Fence Sections. 1.3 3) Screw in loose boards. 1.4 4) Use Fence Mender to support Wobbly Posts. 1.5 5) Replace old lattice on top of your fence. 1.6 6) Hang Flower Baskets.

Do you have to stain a fence after pressure washing?

Staining a wood fence after pressure washing is not necessary. However, while it is not necessary to stain a fence after power washing, numerous benefits should persuade you to take a little bit of extra time now to protect your clean wood fence for years to come.

How do you take care of a wood fence?

Clean Every 3 – 5 Years Every two to three years, clean the wood to remove dirt, moss, mildew and graying. Then, recoat with a UV inhibiting, water-repellent coating. After making repairs, scrape off any moss or loose, peeling paint until you can see new wood, and clean the fence with a pressure washer.

Can you stain only one side of a fence?

A question that customers sometimes ask is whether both sides of the fence should be sealed. In reality, if one side of the fence faces a neighbor and they choose not to stain or seal their side will discolor and yours won’t, without this affecting the structural integrity of the structure.