Table of Contents
The descriptions are generally read from front to back. For example, the description above would be read “The north 1/2 of the southeast quarter of the southwest quarter of section 24, township 32 north, range 18 east.” However, the easiest way to interpret descriptions is from back to front (or, right to left).
How do you read a legal description of a degree?
The more common method used in land surveys and property descriptions uses quadrants. The quadrants are northeast, southeast, southwest and northwest. For an example of N25°E, face north, then turn 25 degrees to the east and go that direction. If your bearing is S40°W, face south and turn 40 degrees to the west.
What do the numbers in a legal land description mean?
The legal description of land follows a set sequence of quarter section, township, range, and meridian: the designation NW 27-9-25 W2, for instance, means the Northwest Quarter of Section 27 in Township 9 Range 25 West of the Second Meridian.
How do you read township and range description?
Sections in each township are numbered consecutively beginning with number 1 in the northeast corner of the township, and counting right to left then left to right and so on weaving back and forth through the sections of the township, and ending with number 36 in the southeast corner.
How do you read a degree on a deed?
The standard symbol for a degree is ‘o’. Note: Often, you will find see bearings such as this: “N 53°37¢23² E”. In this case the 37′ refers to minutes (not feet) and the 23″ refers to seconds (not inches). The bearing stated above, without the abbreviation, translates to “North 53 degrees, 37 seconds, 23 minutes East.
What does FRL mean in a legal description?
Slang / Jargon (3) Acronym. Definition. FRL. Fixed Rate Loan.
How do you read a legal land description in Ontario?
Using Township Canada you can find legal land descriptions using three formats: Section-Township-Range-Meridian, for example: 25-24-1-W5. Quarter Section-Section-Township-Range-Meridian, for example: SW-25-24-1-W5. LSD-Section-Township-Range-Meridian, for example: 7-25-24-1-W5.
What does SD mean in legal description?
Deviation without reasonable justification (e.g. to save life or property) amounts to a repudiation of the contract by the carrier (see COMMON CARRIER).
How do you read land coordinates?
When outlining the coordinates of a location, the line of latitude is always given first followed by the line of longitude. Therefore, the coordinates of this location will be: 10°N latitude, 70°W longitude. The line of latitude is read as 41 degrees (41°), 24 minutes (24′), 12.2 seconds (12.2”) north.
How do you read a legal land description in Alberta?
You will normally see the legal land description written as: NE-16-74-20-W4 (Quarter Section-Section-Township-Range-Meridian).
How are sections numbered?
Sections are numbered from the top right, or northeast section, then to the left, and down in an “S” formation.
Which method is the most accurate form of describing property?
That’s why using a legal description is the most accurate way to identify real estate. A legal description can be long and look complicated, but it’s a more precise method of describing where a property is located.
Which of the following is not a valid way to define a legal description?
Which of the following is NOT a valid way to define a legal description? The answer is street address. While usually enough to find the location of a particular building, the street address is not precise enough to describe legal ownership.
How do I write a legal land description?
Legal land descriptions are written as in the following example: SW 24-38-20-W5 – southwest quarter of section 24, township 38, range 20, west of the 5th Meridian.
How do you read a metes and bounds?
A metes and bounds description, which means distance and direction, begins and ends at a landmark called the point of beginning (POB). The property is measured and described in a point of direction from a starting point using angles, distance, directions, and landmarks.
How do you read a land survey bearing?
In land surveying, a bearing is the clockwise or counterclockwise angle between north or south and a direction. For example, bearings are recorded as N57°E, S51°E, S21°W, N87°W, or N15°W.
What does v l mean in real estate?
LTV. LTV, or loan-to-value, is a ratio that lenders use to assess the risk involved with extending a mortgage loan to a borrower. The LTV ratio amounts to the mortgage amount divided by the appraised value of the property the borrower desires.
Whats ASL stand for?
(used in digital communications) age, sex, location. Also asl. American Shuffleboard League. American Sign Language.
What does R W mean on a survey?
Right of Way (R/W) surveys are performed to gather data on existing property rights that affect the state highway system. This includes monuments, roadways, fencing, utilities, and any other evidence that make up the land-net0F1.
How do I find land survey records in Ontario?
The best way to get a land survey in Ontario is to visit a ServiceOntario counter. Make sure that the location you visit has someone who specializes in land surveys on duty. Be aware that fees may apply to access these records or request a search.
How do I find my property lines in Ontario?
An Ontario Land Surveyor is the only person who can confirm property boundaries. If you wish to obtain a new survey of your property, contact a licensed Ontario Land Surveyor, many of which are listed in your local business directory or the internet under ‘Surveyors-Land’.
What is a legal description of property Ontario?
A legal description is a description of real property by a government survey, a metes and bounds survey, or by lot numbers of a recorded plat. The description must be complete enough that a parcel of land can be located and identified based on what is written.
