Table of Contents
Is it worth refinishing a cast iron tub?
The cast iron tub refinishing procedure also known as cast iron tub reglazing, not only is a viable alternative to replacement when the tub is old, stained, damaged, or simply doesn’t look good anymore but has become the number one choice for contractors nowadays when they are hired by a homeowner to remodel a bathroom May 13, 2021.
Can old cast iron tubs be refinished?
What is Cast Iron Tub Refinishing? Bathtub refinishing involves sanding down the tub’s surface, filling in cracks and applying several coats of primer before rebuffing. For example, an outdated tub and surrounding tile can be refinished at the same time.
How much does it cost to refinish a clawfoot tub?
The average cost to refinish a clawfoot tub is $300 to $650, depending on the size and condition. Clawfoot tub issues such as erosion, rust, pinholes, scarring, lead paint, or chips need to be addressed before reglazing. Refinishing takes 4 to 5 hours and typically comes with a 3 to 10-year warranty.
How do you recondition a cast iron tub?
How much does it cost to have a cast iron tub refinish?
How much does it cost to refinish a cast iron tub? For an average cost of $350 to $500—a fraction of the $1,200 to $5,000 expense of a new cast-iron or steel tub installed—refinishers can make an antique fixture look brand new.
How many times can you refinish a cast iron tub?
Refinishing can be done by professional installation or by using a do-it-yourself reglazing kit. Such repeated refinishing applications cannot be repeated indefinitely. Refinishing is regarded as a temporary fix in the best of circumstances, and two refinishing coatings are the most you can reasonably expect to apply.
What kind of paint do you use on a clawfoot tub?
Paint the tub. Oil based paints or exterior paints are a good choice for withstanding the damp bathroom. I used this exterior paint in a satin finish. Brush, roll, or spray the paint, careful to avoid brushstrokes. Once dry, sand lightly (if needed) and clean before applying a second coat of paint.
How do I know if my tub is steel or cast iron?
A stainless steel tub will make a ticking or clacking sound. A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of paint.
Is Reglazing a tub a good idea?
If your existing bathtub is already in pretty good shape but is covered in minor stains, scratches or other surface imperfections, reglazing is a good option. It’s also ideal for certain types bathtubs. Acrylic bathtubs can also be reglazed, as long as they don’t have any significant issues.
Can I Reglaze my bathtub myself?
Whether you have your tub refinished by professionals or recoat it yourself, all the work is done on-site. Surrounding materials, including tile, flooring, and all of the other elements, are masked off and left in place as the resin coating is applied.
What is the difference between bathtub refinishing and reglazing?
So the main difference between the “bathtub refinishing” and “bathtub reglazing” is that the former refers to the entire restoration project and the latter refers to the commercial coating applied at the end of the process.
What kind of paint do you use on a cast-iron tub?
For a cast-iron or fiberglass tub, you can use acrylic urethane enamel, which may already come mixed for you, or you may have to mix it it, just depending on what kind of kit you purchased. For fiberglass tubs, you can also use a two-part epoxy paint instead of the acrylic.
Can you fix a cast-iron tub?
Here are a few products you can use to repair your cast-iron tub. If you go the route of the clear epoxy and paint, you’ll need high-gloss paint mixed to match the color of your cast-iron tub. The epoxy does NOT shrink as it dries. Work with great light and don’t overfill the chip.
How long does Reglazing a tub last?
The short answer is that a professional reglaze will last 10-15 years. The long answer is that there are other factors in prolonging the glaze and finish of your bathtub. Refinishing helps protect the integrity of your bathtub.
How long does Miracle Method refinishing last?
With proper care and maintenance, Miracle Method refinishing can extend the useful life of your fixtures for up to 15-20 years or more. Our MM-4 bonding agent creates a chemical bond between old and new surfaces, assuring you long life for your refinished tub.
Do it yourself refinish bathtub?
Tub or Shower Refinishing: Basic Process Remove or tape drain and fixtures. Scrape the tub with a razor. Dull the surface with etching powder. Sand the surface. Clean with a tack cloth. Tape the caulking. Apply the primer. Apply the coating with a roller, then with a brush.
Why are clawfoot tubs bad?
“It doesn’t butt up against the wall, so you get a lot of spillage and it can cause damage to your wall or can seep in and actually drip down from your bathroom to your lower level ceiling,” Jonathan Scott of HGTV’s Property Brothers, told PopSugar. Consider tiling bathroom walls or nixing a clawfoot tub altogether.
What is the average cost to Reglaze a bathtub?
The average cost to reglaze a bathtub is $722. Prices may vary depending on the size of the tub, location, and current labor costs. It may cost as low as $400 to as much as $1,000 or more to have a tub refinished. This cost includes labor, prep work, materials, and cleanup.4 days ago.
Can you Reglaze a cast iron tub more than once?
Yes, you can reglaze (in other words re-surface or refinished) a bathtub that has been reglazed before. Either way bathtub reglazing problems can arise after the reglazing process has been done. If the craftsmanship was poor, these issues will continue to rise until the tub is no longer usable.
