Table of Contents
What kind of paint do you use on a pool slide?
About Epoxy Pool and Fountain Paint High Performance Epoxy Pool Paint is designed to provide long lasting protection for concrete, plaster, gunite, and fiberglass swimming pools, slides, and spas.
What kind of paint do you use on a fiberglass pool slide?
According to In The Swim, the only kind of paint that should be used on fiberglass pools is an epoxy pool paint. For fiberglass pool slides, use a product made specifically for this, such as EP Epoxy Pool Paint. This works on painted and unpainted surfaces and produces a tile-like, high-gloss finish.
Can you repaint a slide?
Completely wash and dry the slide before painting. I used tsp and a rag to really scrub off any of the leftover dirt and debris. Paint the slide using even coats of spray paint, allowing it to completely dry between coats. I gave our slide three coats of spray paint for lasting durability.
Can you wax a pool slide?
Waxing in the spring and fall will help protect the slides finish and provide a good added barrier to the harsh UV rays of the sun. The wax is generally all that is needed to maintain the slide and help keeps its original gloss as long as you start the maintenance process early, before there are problems.
How do you fix a water slide?
After you have sewn your inflatable water slide, you need to patch the hole. Cut a patch that is at least ½ inch bigger than the tear, spread small amounts of glue around the square, and place the patch onto the glue to cover the tear. Then let the glue dry on the patch for at least 24 hours.
How do you wax a slide?
To do this safely, we recommend rubbing wax paper over the entire slide surface. Rubbing the wax paper transfers the food-safe wax onto the surface of your slide. While wax paper is our preference when polishing a playground slide, some parents like to use spray-on wax to achieve the same effect.
How do you clean a fiberglass slide?
Cleaning Tips: A good option is something like dish soap and a small cloth. For deeper cleaning, you can use a granulated chlorine power (just not chlorine shock). Be careful never to scrub too vigorously for fear of harming the slide’s finish. Windex is a good way to polish slide surfaces as well as aluminum laders.
What is the best product to resurface a fiberglass pool?
After 5-years the entire pool now has the Super Epoxy product on it and was done as a DIY by one of our customers. Super Epoxy, the ultimate fiberglass swimming pool refinishing.
Can you resurface a fiberglass pool yourself?
So, how do you resurface a fiberglass pool? Typically, you would use a product like ecoFINISH if you need to have your fiberglass pool resurfaced. ecoFINISH is a long-lasting, chemical-resistant coating that can be applied to a variety of concrete and fiberglass pool surfaces.
How much does it cost to repaint a fiberglass pool?
Fiberglass Pool Resurfacing Cost Fully resurfacing fiberglass pools costs an average of $6,500 per 1,000 square feet. If, however, you just want a new gel coat with a painted topcoat, which is enough to cover minor scratches and dings, you’ll pay around $1,000 to $1,200.
Can you repair a pool slide?
Surface Cracks – Newer rotomolded and acrylic slides rarely crack, but if they do, it can be fixed. It requires a plastic welder and PE plastic which can be purchased in flat rods. After preparation, new material of a similar color is melted into the crack, sanded and polished. Fiberglass slide cracks are more common.
How do you resurface a plastic slide?
Read the following instructions for a perfect polish of your plastic slide. Step 1: Prepare a cleaning solution. Boil some water and let it cool down a bit. Step 2: Scrub the slide. Bring a hand towel or an abrasive rag first. Step 3: Dry the slide. Step 4: Wax the slide. Step 5: Sand the slide surface (Optional).
What paint can I use to paint a plastic slide?
Using brush-on paint for plastic can be a good idea if you’re painting large areas. The best paint for outdoor and playground plastics is Acrylic-Latex Paint.
How do you paint outdoor plastic?
Spray plastic with a plastic primer and allow to dry. Spray the plastic with spray paint specially formulated for plastic. Use light even strokes when spraying. Allow to dry completely between coats.
What kind of wax do you use for pool slides?
DESCRIPTION: SlideGloss® is a unique sprayable water repellent finishing wax that produces the quickest “WET LOOK SHINE” to dull color faded fiberglass water slides. It has been specially formulated to be easily sprayed-on and immediately wiped-off by your internal maintenance staff or seasonal employees.
How do you clean a waxed pool slide?
Steps to Properly Clean and Wax a Water Slide. Apply CalKlean to affected areas using a pump sprayer. Let product stand as long as needed (1-3 minutes) but do not let dry. Remove by either wiping with a clean cloth or rinsing with tap water. Allow surface to dry before polishing, waxing, or top coating.
