QA

Question: How To Refinish A Wooden Table

Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.

Can I refinish just the top of a table?

Depending on the type of table top and finish you’re working with, you could get away with lightly sanding or repainting the table to give it a new look. We wanted to refinish a table top that had worn considerably over time. We successfully stripped the varnish and stain and refinished the table top over a few days.

How do you refinish a wood table without stripping it?

The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It’s actually not that hard to do.

Can you Restain a table without sanding?

You absolutely do not need to sand the finish off the table, just lightly sand enough to rough up the existing finish to give the Polyshades something to grip.

How do you sand and refinish a table top?

Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.

Is it better to sand or strip furniture?

Stripping is Faster and Often Safer. Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.

Do you have to strip wood before staining?

There’s no stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of PolyShades® (see step-by-step instructions provided in this Guide).

How do you revamp a dining room table?

7 Ways to Refresh the Look of an Existing (Old/Boring/Not You) Dining Table Refinish the finish. You’d be surprised what a new finish on an old dining table can do. Distract with chairs. Forget chairs. Table cloth. Amazing light fixture. Set it. Replace the base.

How do you paint a table without sanding it?

Here are 5 Ways To Paint Furniture Without Sanding: USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep-sanded. USE A BONDING PRIMER. USE A LIQUID SANDER/DEGLOSSER.

How do you strip and refinish a table?

How to Strip & Refinish Wood Furniture Step 1: Choose a Work Area. Work in a well-ventilated area such as your open garage or on an outdoor deck or patio. Step 2: Strip Away Old Finish. Step 3: Sand It. Step 4: Apply Sanding Sealer. Step 5: Stain It. Step 6: Apply Sealant.

How do you restore wood furniture with vinegar?

Mix a quarter cup of olive oil to a quarter cup of white vinegar. Use a soft cloth, apply a small amount of the mixture to the wood and buff the wood to a shine. The oil should replenish moisture to the wood. Again, you should test a small area first.

Can you stain over already stained wood?

Already Stained and Finished Wood If the object you’re hoping to stain has been sealed with a topcoat, you won’t be able to restain it, but you can go over it with a coating or a colored stain blend. Apply the coat with a fine-bristle paintbrush made expressly for furniture refinishing.

What happens if you stain over stain?

If one section dries and is then overlapped, you are effectively applying a second coat to that overlapped area, and this will lead to blotchy finish. If the stain pools during application, you are applying too much at once; cut back.

Do you have to remove old stain before restaining?

You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.

How do you hand sand a table?

Put the sandpaper on the bottom of the hand sander or electric sander (whichever you’ve chosen) before you start sanding. Begin sanding the entire wood surface with coarse-grit sandpaper (80 grit), then progress to medium-grit sandpaper (150 grit), and then to a fine-grit sandpaper (220 grit) before you stain.

What kind of paint do you use on a dining table?

When it’s time to paint, make sure to select a high-quality water-based enamel paint, which will give you a hard finish that’s similar to an oil paint. Kitchen tables take a beating, and you’ll need a paint that can withstand plates, cups and all sorts of other objects banging it every single day.

Can you apply varnish with a rag?

You really can use just about anything to apply varnish and other finishes to a surface, even a rag or the flat part of your hand. It’s what you do after the varnish has dried that makes the difference in the end. But in reality, any varnish can be used for a wiped finish, even polyurethanes.

Should you sand after varnish?

If the varnish is cracked or flaking, you must make the wood bare by sanding or stripping the entire surface. At this point, many people reach for a sander. Although sanding can be effective, it can also be extremely hard work and very dusty.