QA

Quick Answer: How To Refinish An Antique Dresser

How to do it apply wood stripper. Apply Wood Stripper. Remove hardware from the dresser and place in a safe spot. scrape off paint. Scrape Off Paint. remove residue on dresser. Remove Residue. sand dresser. Sand Dresser. stain dresser. Stain Dresser. apply polyurethane to wood. Apply Polyurethane to Refinished Dresser.

How do you refurbish an antique dresser?

Quick Antique Dresser Restoration Steps: Lightly sand entire piece of furniture with a fine grit. Using gloves and a rag in a well ventilated area, apply a bit of finish restorer to the rag and then rub it into the wood a section at a time. Continue until the whole piece is covered to your satisfaction.

Should I paint an antique dresser?

This cost alone could give you an answer. If an unpainted piece of antique furniture is currently worth $2,000, it’s likely best to leave it in its current condition. If a piece of furniture is currently worth $20, but it will be worth $150 after painting, then painting is the best option from a business standpoint.

How do you refinish a dresser without stripping?

How to restore wood furniture without sanding and stripping Remove any hardware. Wipe on mineral spirits. Clean the surface. Fix the white rings. Fill small cracks and imperfections. Try to fix the dents. Restore the colour with gel stain. Renew the lustre with a wipe-on finish.

Does refinishing antique reduce value?

So, the short answer to this question is NO, refinishing a piece of furniture or doing furniture repair does NOT decrease the piece’s value… but there are a few circumstances that need to be considered. Instead of furniture refinishing a period piece, Finish Pros recommends preserving it to prevent further damage.

How do you update dark wood furniture?

GET YOUR FREE FURNITURE REFINISHING SHOPPING LIST! Add Furniture Wax. If you have a piece that is stripped already or just could use new wax, consider adding a darkened wax to it. Clean It! Sometimes, all your next project needs is a good scrubbing. Spray Paint Secondhand Furniture. Add New Hardware. Swap Out the Legs.

Can you just paint over wood furniture?

You can paint over stained wood, painted wood and so much more with this simple method. To get paint to adhere to wood, you have to sand it, to rough up the surface. This allows the paint to grip the surface, especially with anything that’s varnished. Liquid sandpaper dulls a glossy surface, with far less effort!.

How do you refurbish a dresser?

How to do it apply wood stripper. Apply Wood Stripper. Remove hardware from the dresser and place in a safe spot. scrape off paint. Scrape Off Paint. remove residue on dresser. Remove Residue. sand dresser. Sand Dresser. stain dresser. Stain Dresser. apply polyurethane to wood. Apply Polyurethane to Refinished Dresser.

Is it better to sand or strip furniture?

Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.

How do you make old wood look new again?

Mix thoroughly ¾ cup of oil (canola oil is perfect) and ¼ cup of vinegar (white or apple cider). Follow application instructions, and your wood pieces will be looking as good as new in no time!Jul 10, 2014.

Can you repaint a dresser without sanding?

So the question becomes, “Can I paint laminate furniture without sanding too?” Yes! By using the same method as above, you can paint laminate furniture without sanding. The priming step is the most important for painting laminate furniture since you don’t want to sand an already delicate surface.

Can I paint over varnished wood without sanding?

Can you paint over varnished wood without sanding? Yes. The oil based primer will stick to varnished or sealed wood. And then you can paint over it with latex paint.

What kind of paint do you use on a dresser?

Materials for painting a dresser Any furniture paint will work including chalk paint and latex paint.

What’s the difference between antique and vintage?

In the strictest sense, the difference between an antique and a vintage item is its age. Antiques are items which must be at least 100 years old. That means, as of the date of this posting, an antique item was made on or before April of 1918. Vintage items are not as old as antiques.

Can you use pledge on antique furniture?

Avoid using Pledge® or a similar commercial polish on antique furniture. Apply wax to surfaces only every three to five years and use only traditional furniture paste wax, not a cream or spray. Make sure that the wax does not contain silicone.

How do you seal antique wood furniture?

Seal the Wood If your furniture has cracks or holes, use a filler that matches the color and grain of the wood. Apply a generous coat of sealant all over the furniture. Wipe away any excess with a clean cloth. Once the sealant is dry, use a fine grit sandpaper to smooth the surface. Wipe away excess wood dust.

What can I do with an old dresser?

10 New Uses for Old Dressers Space for a Sink. 1/11. Make a big splash in the bathroom by repurposing an old dresser as a vanity. Dressed for Dinner. 2/11. Drawer Decor. 3/11. Spring Wardrobe. 4/11. Tune In. 5/11. No Monster Under the Bed. 6/11. Open to New Possibilities. 7/11. Approach the Bench. 8/11.

Is dark wood furniture old fashioned?

Everything is cyclical of course and there was a time – actually since the 1970s – when antiques, as they used to be called before the rather derogatory name of brown furniture was coined, were regarded as old fashioned and dull.

Is Deglosser better than sanding?

Liquid deglosser can save time and energy by roughing up a surface to ready it for paint or stain via a chemical process versus the elbow grease required for sanding. While deglosser quickly removes paint and stain, it can’t smooth uneven surfaces as sanding can.

What happens if you don’t sand before painting?

Sanding also removes any bumps and impurities from the wood which would make it look uneven and messy. If you don’t sand before painting you will likely end up with an uneven finish and a paint job that will likely end up peeling after a few months.

What is the best paint to use on wood furniture?

For furniture, it’s best to use a satin or semigloss finish in either a latex or an oil-based paint. Never leave primer unpainted. If you choose a latex paint, a latex primer is an excellent choice for most uses. It goes on easily and blocks most stains, and it doesn’t have the odor of an oil-based primer.