QA

How To Refinish End Tables

How do you refinish a wooden end table?

Sand Out the Scratches. Strip Everything that Isn’t Sanded. Apply a Pre-Stain Wood Conditioner. Choose & Apply the Stain. Apply a Protective Finish. Put Your Beautiful Newly Refinished Piece to Use!.

How do you refinish a table step by step?

Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.

How do you refinish finished furniture?

Clean. Any refinishing furniture DIY starts with basic cleaning. Examine. Take an overall assessment of the piece and determine if it needs any repairs. Remove the Old Finish. Sanding. Chemical Stripper. Seal the Wood. Stain or Paint. Apply Finish.

Do you have to strip wood before sanding?

It’s almost always better to strip than to sand. To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover. Stripping is messy, which is probably the reason many people chose to sand instead.

Can I refinish just the top of a table?

Depending on the type of table top and finish you’re working with, you could get away with lightly sanding or repainting the table to give it a new look. We successfully stripped the varnish and stain and refinished the table top over a few days.

What is the best product for stripping paint off wood?

The best paint stripper Best Overall: Citri-Strip Paint and Varnish Stripping Gel. Most Eco Friendly: Dumond Smart Strip Advanced Paint Remover. Fastest Working: Sunnyside 2-Minute Advanced Paint Remover. Most Family Friendly: MAX Strip Paint & Varnish Stripper. Most Heavy Duty: Dumond Peel Away 1 Heavy-Duty Paint Remover.

How can I refinish my furniture without sanding?

Here are 5 Ways To Paint Furniture Without Sanding: USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep-sanded. USE A BONDING PRIMER. USE A LIQUID SANDER/DEGLOSSER.

How do you sand and refinish wood?

Use a coarse sandpaper, a sanding block or a power sander to strip the finish off until the surface is smooth. Once most of the finish is off, switch to medium grit sandpaper to further remove any shine. Finally, finish off with a fine grit sandpaper to smooth out the wood until all finish is completely removed.

How do you refinish wood furniture without stripping?

The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It’s actually not that hard to do.

How do I know if my table is varnished?

To identify this type of finish do a simple scratch test. In a small, or easily hidden area of the wood and attempt to scratch off a small portion of the finish. If you notice that the finish comes up in small flake like patches then you know you have a varnish or shellac type of finish.

What does tung oil do for wood?

Originating from China and South America, tung oil—an extract from tung-tree nuts—is a natural drying oil that coats your fine wood furnishings with a transparent, wet finish. It enhances the color of your wood, offers excellent protection and is eco-friendly.

How do you make an old dining table look modern?

7 Ways to Refresh the Look of an Existing (Old/Boring/Not You) Dining Table Refinish the finish. You’d be surprised what a new finish on an old dining table can do. Distract with chairs. Forget chairs. Table cloth. Amazing light fixture. Set it. Replace the base.

Can I stain over stain without sanding?

You do not need to sand off the previous stain and finish. The purpose of the light sanding is to give a little tooth to the surface to help your new stain colour stick.

Can you stain over already stained wood?

1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.

Can you stain over varnish?

It is possible to apply stain over varnish, as long as you aren’t expecting results similar to those when staining untreated wood that drinks in the stain. Clean and rough-up the varnish first to remove any grime, dust or debris and also to give the surface some texture the stain can cling to.

Why is my wood blotchy after stripping?

After stripping the old finish off wood furniture you may notice a discoloration that remains on it. This is caused by old wood stain that is deep within the grain where the stripping agent was unable to penetrate. Even sanding does not always remove this discoloration, since the grooves are sometimes very deep.

Do you have to completely strip furniture before staining?

There’s no stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of PolyShades® (see step-by-step instructions provided in this Guide).

Does vinegar remove paint from wood?

Vinegar does not remove paint from wood, but it can soften paint and make it easier to remove. It is a non-toxic, natural alternative to chemical paint strippers, but may take a little more time and effort to get all the paint off.

How much does it cost to refinish a table top?

Cost to Refinish a Table. A basic table will range between $200 and $600 to refinish. The process is typically the same regardless of condition, and price changes only based on size. For any wooden table, the process involves stripping the old finish and applying a new final coat.

Is Tung or polyurethane better?

Tung oil takes up to 48 hours to dry. Polyurethane dries faster than tung oil and takes only 12 hours to cure. Polyurethane sits on top of the wood to form a protective barrier that is watertight in only two coats. When considering tung oil versus polyurethane for wood floors, polyurethane wins the debate every time.