Table of Contents
How To Remove A Gas Fireplace 1) Isolating The Gas Supply. 2) Removing The Trim. 3) Removing the Surround. 4) Disconnecting The Fireplace From The Gas Supply Pipe. 5) Removing Vent Apparatus. 6) Removing Electrical Connections. 7) Removing Cable Fixings. 8) Removing The Gas Fireplace.
Can you remove a gas fire yourself?
Can I remove a gas fire myself? To be clear, you should never attempt to remove a gas fire yourself. It is a legal requirement that this job is completed by a Gas Safe Registered engineer. The risks of tackling this as a DIY job include fire, and death through inhalation if you do not properly cap off the gas pipe.
How much does it cost to remove a gas fireplace insert?
Cost to Remove a Gas or Electric Fireplace Insert When a professional takes out the insert alone, expect to pay between $250 to $600. However, you’ll need a plumber qualified to work with gas lines or an electrician to disconnect the insert from its fuel source. This will run an additional $100 to $300.
How expensive is it to remove a fireplace?
If you need to remove the inconvenient or dangerous parts of a chimney or fireplace, you can avoid the massive cost of demolishing the entire system and structure. A partial chimney or fireplace demolition costs $500 to $2,000. A complete removal could run $4,000 to $6,000.
How much does it cost to move a gas fireplace?
Typically, the cost of moving a fireplace and chimney is $3,000- $6,000. The process includes demolishing the breast and the stack, installing structural support, and repairing the floor, walls, and roof.
What’s behind a gas fireplace?
What Is Behind A Fireplace Surround. The area around the opening of a fireplace is called the fireplace surround, and can be made from a number of different materials including wood, stone or metal. The fireplace surround was then removed, leaving behind the cast iron fireplace back panel and the gas fireplace insert.
Can you cap off a gas fireplace?
Gas pipe can be capped in a wall. The layout of the pipe may not make it easy to cap it exactly where you want to unless you have a pipe threader. In my opinion removing a gas fireplace is a serious DIY project.
How easy is it to remove a fireplace?
If it’s a wooden or tiled surround, it can be as simple as removing screws and lifting it away. You may need some help with tiled surrounds due to their weight. It’s also important to wear gloves and protective goggles if you choose to break them up with a sledgehammer.
Will removing fireplace decrease home value?
But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.
Can a fireplace insert be removed?
A wood-burning fireplace insert must be removed when your fireplace and chimney enclosure need cleaning. Most wood-burning fireplace inserts are heavy and are secured to the enclosure with screws or bolts. If you don’t want to hire a professional to remove the fireplace insert, you can attempt to remove it yourself.
Can you remove old fireplaces?
Removing an old fireplace is relatively easy, but it’s likely to be a two-person job and quite demanding in physical labour. Lots of mess will be created too. You will probably need only a hammer and chisel plus crowbar or garden spade, but get someone to help with the lifting and lowering, to avoid injury.
Can you remove a fireplace in the middle of a room?
Consider a partial fireplace removal Alternatively, you can leave the stack and remove only the fireplace and chimney breast (the part that protrudes into the room) below the roofline. Just note that a partial removal may require help from a structural engineer to ensure the building’s structure remains sound.
How do you decommission a fireplace?
Apply a bead of butyl rubber caulk around three sides of the chimney at the top, and set the cut piece of metal on the chimney so the edges line up with the caulk bead. Press the metal into the caulk. The goal of this metal cap is to prevent rain from coming in, but it shouldn’t be an airtight seal.
Is it expensive to relocate a fireplace?
The average cost to move a fireplace is $3,000 to $10,000 or more, depending on the height, type of surround, and if it’s a pre-fab wood or gas fireplace, or site-built masonry fireplace. Moving a masonry fireplace requires demolishing the old one, repairing the wall, then installing a new fireplace.
Can you move a gas fire?
If the fire has a flue, and it can still get to the fire in the new location that’s fine. But you need to have a gas safe engineer to do the moving of the fire, so they will be able to help you more. Please don’t try to move the gas fire unless you know what you are doing. It may still be possible.
Can you move a house with a fireplace?
A: Generally speaking, you must have all services disconnected and the basement or crawlspace totally cleaned and stripped down. If fireplaces, chimneys or porches are being removed, this must also be completed. Some excavation may also be required beforehand.
