QA

Quick Answer: How To Replace Shower Valve Stem

Can I replace a shower valve myself?

Shower valves can get damaged, you have to get a replacement immediately to prevent water from leaking out completely. A plumber can do a quick fix, but taking some easy steps to replace the shower valve yourself isn’t a bad idea. It is a way to save money and gain useful skills at the same time.

How much does it cost to replace a shower stem?

According to data from Porch, you can expect to pay around $310 for a valve and stem replacement, or slightly more if you replace the whole unit. Fees for replacing the whole shower valve can be as high as $540, with this price including the cost of the unit and labor.

Are shower valves universal?

Shower valves are not universal and you cannot mix manufacturers when it comes to trim and rough-in valves. Besides that, one manufacturer will have different valve sizes and types which may also not be universal and interchangeable with each other. Luckily, shower sets are always sold as a complete set.

What happens when a shower valve goes bad?

There are a few ways to tell if your shower cartridge has gone bad: Dripping or running water when you turn your shower off (most common) Difficulty turning the shower handle, which worsens over time. Shower handle gets stuck or “slips” and doesn’t turn on the water.

Is it easy to replace shower fixtures?

Even if you’re not very experienced with bath or plumbing projects, many of the steps necessary for replacing an old or damaged shower faucet are relatively simple.

What are the different types of shower valves?

In a nutshell, there are three different types of shower valves on the market: pressure balancing shower valve, thermostatic shower valve and diverter shower valve.

How hard is it to replace a shower valve?

To replace a shower valve, you really need to be an experienced home improvement DIYer. To replace a shower valve is a far more complicated task than changing a showerhead. A good knowledge of plumbing is absolutely necessary to do this job successfully.

How do you replace a single handle shower valve?

How to Replace Single Handle Shower Faucet Turn off the water to the shower. Remove handle and escutcheon plate to expose shower valve. Loosen locking nut with pliers and pull old cartridge from center of valve. Put new rubber seat with spring onto end of pencil and push into the valve.

Do you have to replace valve when replacing shower faucet?

Simply replace the visible trim for an brand new appearance Change out tub/shower control handles and spouts to achieve a brand new look, without redoing the valve plumbing.

How do I know what shower valve to buy?

Assess the faucet and determine how many handles it has. If it has two handles, it is a double-handle faucet, which means that the hot and cold water pipes each connect to separate handles. If it has one handle, it is a single-handle faucet. If the faucet has three handles, it is a rare three-handle model.

Can you replace a shower valve with a different brand?

Showerhead threading is pretty much universal, you can swap one for most any other. Shower valve trim kits are the exact oppositeyou may have luck by staying within a certain manufacturer, but for the most part trying to swap a trim kit onto an existing valve may or may not work.

How do I find my shower stem?

This is often located behind the hot water heater, but you can also use a curb key and shut it down in front of the house. To take the shower cartridge out, loosen the screws – often located on the side of the handle – with an Allen wrench. If you can’t find any visible screws, remove the handle cover to find them.

How do you replace a shower diverter valve?

Diverter Valve on a Spigot Unscrew the set screw. See how the spigot is attached to the wall. Unscrew spigot from the wall. Be careful! Wash Supply Pipe. Make sure that you clean off any bits of gunk from the supply pipe. Replace new spout on the copper pipe. Test it and make sure it works!.

Can you replace shower fixtures without removing tile?

Does the Repair Require Tile Replacement? This may require some cutting or removal of the tile around the shower valve opening to access the leak. While your plumber will take great care to cut or remove only enough tile as necessary, you could face some minor tile repair depending on the size of the opening.

What is the difference between a shower valve and cartridge?

Conventional shower stem valves consist of a metal body concealed behind the shower stall’s wall. Cartridge shower faucet assemblies might consist of one or two handles. A single-handle cartridge faucet opens and closes water flow with an up and down motion, and regulates temperature with a left or right motion.

What causes a shower valve to leak?

When water drips or drizzles from a shower head, there is a problem with the shower faucet (valve). In most cases, inner seals are worn, or parts have become corroded or clogged with hard water deposits. And the rubber O-rings and gaskets that seal connections between moving metal parts wear down with time and use.