Table of Contents
How to Factory Reset Bissell CrossWave Max Click on the Hamburger menu button on the top left of the screen. Click on your Bissell CrossWave Max. Tap the gear in the top right corner of the screen. Choose the “Factory Reset” Button. Click on the red “Reset machine” button.
Why is my Bissell CrossWave Cordless not working?
Another reason you don’t have power could be because the handle isn’t inserted properly into the body of the CrossWave®. Push down on the handle. When properly inserted, it should “click’ into place. Remove the handle and re-insert into the body, push down until you hear a “click.”.
What do I do if my Bissell CrossWave won’t charge?
The most common reason why a Bissell CrossWave won’t charge is due to a damaged cord or plug. If a Bissell CrossWave won’t charge and the lights don’t turn on, first, try to realign the machine on the docking station. In most cases, the Bissell CrossWave should charge normally.
What does 2 red lights mean on Bissell CrossWave?
The two blinking red lights is a known issue, call Bissell and they will replace. The issue is a design flaw where the unit gets damaged if left on the charging station for a long period of time.
How do I connect my Bissell CrossWave cordless Max to WiFi?
Pairing Steps: Step 1: Download the BISSELL Connect app from Apple app store or Google Play store. Step 2: Connect CrossWave Cordless Max to BISSELL Connect. Step 3: Connecting the product to WiFi. Step 4: Setting-up the CrossWave. Step 5: Update Available – Firmware.
Can you replace the battery in a Bissell CrossWave cordless Max?
A: Hi Patti – the battery can be replaced at a BISSELL Authorized Service Center if necessary and is covered under the manufacturer warranty. We don’t offer a replacement battery consumers can purchase and install themselves.
Why does my Bissell CrossWave keeps shutting off?
If your machine turns off automatically again, unplug your machine and remove the nozzle. Hold the tab on the brush roll and spin the other end. Check the drive gear where the brush roll goes into the foot of the machine and remove any debris that may be wrapped in that area. Reinstall the brush roll and the nozzle.
How do I know if my Bissell CrossWave Max is charging?
Make sure your CrossWave® is fully charged before first use. To check the status, remove it from the charging base and turn the machine ON. You’ll know the battery is fully charged when all three white status lights are illuminated.
Why is my Bissell vacuum not charging?
Cordless Bissell vacuum cleaners might have no power due to a dead battery, a faulty charging station, or a non-operative wall outlet.
How do I fix CrossWave internal error?
Remove and replace the machine on and off the dock three times. Remove CrossWave from dock. Leave machine powered off for 30 minutes. Attempt to turn machine back on. If issue persists, go to Brush Not Turning.
How long does the Bissell CrossWave cordless Max battery last?
The BISSELL® CrossWave® Cordless Max combines tasks, vacuuming and washing at the same time, so you save time. The 36V lithium-ion battery provides up to 30 minutes of cordless cleaning power*, so you can move throughout your home without being tied to an outlet.
Can you overcharge a Bissell CrossWave?
WARNING Overcharging may cause battery damage, fire or explosion. TIP: Be sure to charge unit when there is less than 10% power left, one LED flashing red. Your BISSELL® CrossWave® Cordless has a Battery LED light display that will turn on when the unit is ON or charging to show the battery life status.
Why is my BISSELL not connecting?
From the phone’s home screen, open the Settings app. Scroll down to the “BISSELL” row, and tap on it. Under “Allow BISSELL to Access”, enable the toggle for “Camera” Restart the app and try again.
How do you put a BISSELL in pairing mode?
To put the robot in pairing mode, press and hold the Start/Pause Button for 5 seconds until you hear a single beep. 4. From the app, select “Have a BISSELL Connected Product? Connect it now.” Then choose your product from the menu.
Can you use the Bissell CrossWave without WIFI?
While it does nearly everything, it won’t vacuum the house unless you’re pushing it, so why do we need wi-fi? The BISSELL Connect app offers you helpful alerts, like maintenance tracking and notifications for charging the vacuum. It also offers some helpful usage tips so that you can get the most use from your vacuum.
Where is the reset button on Bissell CrossWave Max?
The factory reset button on a Bissell CrossWave Max is located on the handle. It is the “Mode” button with the gear icon.
Can you just vacuum with the Bissell CrossWave cordless Max?
Bissell improves the Crosswave cordless model with the new addition of the Crosswave Max. This new appliance has more advanced features that slightly improve user experience. Besides being cordless, it can vacuum and mop at the same time, auto-clean its brush roll, and connect to your smartphone.
Can you use Bissell CrossWave Max without water?
Answer: Good question – this machine does not produce steam and uses water extraction along with a spinning brush to clean. You do not have to use hot water in the machine.
How long does it take to charge the CrossWave cordless Max?
The CrossWave® Cordless Max can store on the docking station. 4 hours is required for a full charge. You’ll know it’s charging when the battery icon on the digital display is flashing.
How long is Bissell warranty?
BISSELL are committed to ensuring that all products are to the highest standard. All our products have a minimum one year’s manufacturer guarantee from the date of purchase and should you experience a problem within this period please contact the BISSELL Consumer Care line on 0344 888 66 44 – Option 1.
