QA

Question: How To Respool Mini V2 3D Printer

How do I get my computer to recognize my 3d printer?

To connect your printer, you need to plug it in using USB. Your computer needs to install the printers driver software just as it does when using other USB devices like a USB mouse. A printing software should be installed that either comes with the printer or has to be downloaded.

Why is my 3D printer not printing properly?

What’s Causing this 3D Printing Problem? The most common cause is simply that the print just doesn’t bond to the surface of the print platform. If the platform is uneven then for some parts of the print the nozzle won’t be close enough to the platform to correctly extrude and bond the first layer.

How can I fix my 3D printer?

Acetone Clean the surface of both 3D printed parts with sandpaper to flatten the surface. Apply a thin layer of acetone to both surfaces with a brush or a cloth. Now connect the two pieces with a clamp or even some tape and let it sit. After drying out, your pieces should be nicely bonded back together.

Where can I find Gcode files?

GCODE files can be opened by various 3D printing programs, such as Simplify3D, GCode Viewer, are only meant to be used by 3D printers but you can open them with a text editor since they are saved in plain text. NOTE: The “G-Code” name comes from the fact that most of the printing commands begin with a G.

What is the difference between Monoprice Mini V1 and V2?

There are two distinct differences between the V1 and the V2. The first is the build plate. The V1 has a plain aluminum build plate that needs to be covered before it can be printed on. Meanwhile, the V2 has a black matte build plate that can be printed on directly.

How do I connect my Mini Delta WiFi to monoprice?

Connecting to WiFi Disconnect USB cable from the printer. Plug in the MP Mini Delta. Open the MP 3D Printer WiFi Connect App. Verify the correct SSID is displayed. Enter wireless network password or leave blank if no password is needed. Press and hold the Quick Access LED Button for 4 seconds while in idle state.

Does a 3D printer have to be connected to a computer?

No, generally you don’t need a particularly good computer for 3D printing. STL files, the common file for models to print, tend to be small files and are recommended to be below 15MB, so any computer can handle this. Most models are simple, but high-resolution models can be very large files.

How do I find the IP address of my 3D printer?

On Windows, you can use the Control Panel to find the printer’s IP address. Go to Settings > Devices > Printers and Scanners. Find your printer in the list, click on it, and select Manage. Click on Printer Properties. In the General tab, find the Location field. Your printer’s IP address will be located in it.

How do I connect my 3D printer to a monoprice WiFi?

Press the Connect to WiFi button on your mobile device. The connection will be completed within 10 ~ 60 seconds and the message MP Select Mini is now connected to Wi-Fi will be displayed on your device’s screen and the IP address will be displayed at the top of the printer’s LCD screen.

What are the most common problems with a 3D printer?

10 Common 3D Printing troubleshooting Problems you may have THE PRINTER IS WORKING BUT NOTHING IS PRINTING​ NOZZLE IS TOO CLOSE TO THE PRINT BED​ OVER-EXTRUSION. INCOMPLETE AND MESSY INFILL. WARPING. MESSY FIRST LAYER. ELEPHANT’S FOOT. PRINT LOOKS DEFORMED AND MELTED.

What temperature should bed be for PLA?

As a general starting point, PLA tends to adhere well to a bed that is heated to 60-70C, while ABS generally works better if the bed is heated to 100-120C. You can adjust these settings in Simplify3D by clicking on “Edit Process Settings” and then selecting the Temperature tab.

What happens if nozzle is too close to bed?

If the nozzle is too close to the surface of the printing bed, there will not be enough space for plastic to exit the extruder. The hole in the upper part of the nozzle is substantially blocked, and then the molten plastic can not escape.

Does Gorilla Glue work on 3D prints?

The most common type of adhesive used for bonding 3D printed parts is cyanoacrylate glue, more commonly known as superglue, CA glue, or the brand names Gorilla glue and Krazy glue. You can use superglue for the most 3D printing materials, like PLA, ABS, or PETG.

How do you fix a broken STL?

To repair STL files, locate the repair tool on the top toolbar. The repair tool is represented by a red cross icon. Click on the Repair tool. At this point, Netfabb will create a copy of the model.

How do I get Gcode files for my 3D printer?

Install a Slicing Program. To print out a 3D CAD Model, you have to convert an STL to G-code for 3D printing. Add your 3D Printer within the Slicer. Draw or download a 3D Model to Print. Open the STL File and Prepare the Printer Settings. Slice the Part and Get the G-code for Printing.

Can you view Gcode files?

About GCode Viewer This is a viewer for GCode files, which contain commands sent to a CNC machine such as a RepRap or MakerBot 3D printer. This viewer shows the operations the machine will take. Drag the mouse to rotate the model. To view your own model, drag a gcode file from your desktop and drop it in this window.