Table of Contents
Simply mix the powder with water in a large spray container per the directions on the bottle and spray it onto the house. Wait 15 – 20 minutes and use a handled brush to scrub the cedar shingle siding gently, as you don’t want to crack or break them. Then you’ll want to hose down the shakes to wash everything off.
How do you clean and restore cedar shake siding?
The Cedar Bureau recommends using a solution no stronger than one-part bleach to three parts water. Apply it with a pump sprayer and let it sit for about 15 minutes before rinsing it off with a garden hose. Be sure to keep the hose pointed downward to avoid forcing water up behind the shingles.
How do you revive cedar siding?
If your siding’s fresh color lays buried under a gray, weathered surface and mold, buy a bleach-based cleaning solution or mix 3/4-cup of bleach with 1-gallon of water to restore or salvage the cedar’s luster.
How do you restore shake siding?
Steps for repairing shingle siding Use pitchfork to remove all damaged shingles from house. Peel off any paper or housewrap; inspect the condition of sheathing. Securely nail any loose sheathing to the wall studs with 3-inch galvanized nails. Replace damaged shingles in original starter course with new shingles.
What is the best cleaner for cedar siding?
A safe deep-cleaner for wood siding is oxygen bleach. It is a powder that mixes with water. It is non-toxic to vegetation and trees and will not remove any natural color from the siding. You simply keep the wood siding wet with the oxygen bleach solution for 15 minutes.
How do you make cedar shakes look old?
Iron vinegar on cedar – cheap, easy and fast! Soak some steel wool in white vinegar for a few hours or a few days – the longer it steeps, the darker the aged effect will be. Use 0000 steel wool (shown here) so it breaks down even faster in the vinegar.
How do you clean cedar siding with OxiClean?
Mix the powdered Oxiclean as four parts water to one part powdered product and apply the solution with a garden sprayer. All the OxiClean to soak into the wood for around fifteen minutes. Once the time is up, you can use a soft-bristled scrub brush to remove the debris, followed by a rinse-off with the garden hose.
How do you restore weathered wood siding?
Painting and Repairing Old Wood Siding—Step-By-Step Remove the old siding. Carefully use a pry bar to remove the siding. Add house wrap. Now strip the old paint. Next glue any cracks at the ends of the boards. Patch surface holes with an exterior wood filler. Caulk cracks. Sand. Nail any loose boards.
How do you clean blackened cedar?
Mix the powdered bleach according to directions on the bottle, such as 4 parts water to 1 part powder. Apply the solution with a clean garden sprayer, allowing it to soak for 15 minutes. The bleach will remove much of the discoloration. Use a nylon-bristled scrub brush to remove the rest.
Can cedar siding be restored?
Fortunately, you can restore the beauty of your cedar siding or cedar fence by properly cleaning it. Let’s take a closer look at how you can restore the original beauty and natural charm of your cedar and other types of siding without damaging the material.
How do you paint old cedar shake siding?
How to Prepare Old Cedar Shakes for Repainting Scrape any peeling paint chips off the shakes with a scraper. Powerwash the siding to remove any excess dirt or paint with a low pressure pressure washer. Allow the house to dry completely for one to two weeks. Buy primer and paint to finish the job.
Can you use OxiClean to clean siding?
OxiClean is just one of many different brands of oxygen bleach cleaners. Oxygen bleach, aside from being great at cleaning siding covered in mold or mildew, is perfectly safe for you and the environment. It’s actually nothing more than a souped-up relative of hydrogen peroxide in powdered form.
Can I pressure wash cedar?
Power washing can be used to clean cedar as long as the sprayer is set at a low pressure to prevent damaging the wood’s soft surface. Once cleaned and allowed to dry, the wood can then be painted using a urethane-acrylic house paint. It is unsightly, but the cedar has not been damaged.
Can Wet & Forget be used on cedar siding?
Wet and Forget 80003 Cedar Wash With this cleaner, you only need to spray it over the surface that you want to clean and let it do the rest. And finally, if you’re in the market for a cleaner that does not damage the surface of your deck, then this cleaner will do wonders for you. Pros: Perfect for outdoor use.
How much does it cost to replace cedar shake siding?
Cedar shake siding costs between $6 and $12 per square foot for materials and installation. Shingle siding costs $6 to $10 per square foot. To put cedar siding on an entire house, it costs $9,000 to $19,000 or more, depending on the size of the home.
How long do cedar shakes siding last?
Longevity Cedar siding must be properly maintained at all times to reach its maximum lifespan, with many planks needing to be replaced after just 10 to 15 years, and even well-maintained cedar siding may only last around 20 to 30 years in some climates.
Can you reuse cedar shakes?
In all actuality, organic compounds are great for them and that includes old wood. Those who have their old cedar roofs replaced often make a fuss about finding a proper home for the old shakes. After all, you can’t recycle old shakes into new ones. Their old fibers can’t be made new again by adding glue.
