Table of Contents
Do I need to add chemicals to Intex pool?
While Intex pools aren’t the same as permanent swimming pools, they still require similar chemical maintenance. This is why adding chemicals to your Intex swimming pool is so important. That said, the process itself is fairly simple. You’ll need a pool water test kit (or strips) and a couple of startup chemicals.
What is best to put under an Intex pool?
At the bare minimum, yes you should put a tarp underneath your Intex pool. Inflatable pools, Bestway and Summer Ways pools will also benefit from a tarp. Although a tarp will help protect your pool there are far better choices such as foam tiles or proper commercial under pool pads.
Do you put chlorine in an Intex pool?
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
Should I cover my Intex pool every night?
Covering a heated swimming pool at night will reduce heat loss. For a swimming pool that relies on the sun for heat, covering it at night can still make it warm enough to swim in the next day, instead of losing all the heat overnight when the temperatures drop.
How do you prepare the ground for an Intex pool?
The Right Way: Mark the perimeter of your pool, and add 1 foot of extra space to all sides. Use a line level to measure at 12-36 points around the pool. Then use flat shovels or a sod cutter machine to remove turf and lower the high spots. Add a one inch layer of sand.
Do you need sand under Intex pool?
The reason sand is not recommended by the manufacturer is that it is very susceptible to erosion. When the sand erodes out from beneath the pool, the liner will stretch, or the pool will become off-level.
Can I just throw chlorine tablets in my pool?
NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.
Should I use 1 or 3 chlorine tablets?
In most cases, you’re best off with 3-inch chlorine tablets, as one single tablet can treat up to 5,000 gallons of water. On the other hand, 1-inch tablets contain far less chlorine (about half as much as 3-inch tablets), so they’re better suited for smaller indoor pools and spas.
Should I cover my Intex pool when raining?
Leave Your Pool Open When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.
What do I do with my pool when it rains?
Here’s a quick checklist of what to do after a heavy rain so you can get back to enjoying your pool as soon as possible: Remove debris from your skimmer and pump baskets. Skim your pool to remove any debris on the water’s surface, including bugs. Brush and vacuum your pool. Lower the water level if needed.
What should my chlorinator be set at?
5 Maintenance Tips for Salt Chlorine Generators Try to maintain a consistent salt level of between 2,700 parts per million (ppm) and 3,400 ppm, with 3,200 ppm being ideal. Clean the chlorinator cell at least once a season or as needed.
What is the easiest way to level a ground for a pool?
STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.
How level does an Intex pool need to be?
Two inches off usually will not cause any structural issues so you can live with it that way. Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one.
What should I put under my above ground pool to level?
Above Ground Pool Installation Items Pool Cove (Foam) Pool Cove is foam that easily peels and sticks to the inside base of the pool wall. Armor Shield Liner Floor Pad. Armor Shield Floor Pad provides an important protective layer between a vinyl swimming pool liner and it’s sand base. Pool Wall Foam.
What happens if ground is not level for pool?
What happens if an above ground pool is not level, though? If an above ground pool is not level, the water’s weight can cause damage to the walls and liner. As a result, your pool will collapse, potentially causing property damage or personal injury.
Can I put a pool on uneven ground?
Installing a pool on uneven ground creates a safety hazard. The uneven water level can also create problems for your skimmer and other cleaning equipment if they get stuck in the wrongly created “shallow end” you’ve managed to construct in your swimming pool.
What can you put around Intex pool?
Landscaping Around Your Above Ground Pool Concrete or Pavers. Concrete patios are a dependable and easy to care for option for your poolside. Gravel or Rock. Using gravel or rock is one of the most popular ways when landscaping around your above ground pool. Plants or Trees. Planters.
How many bags of sand do I need for a 15 foot pool?
How Much Sand Will I Need For Pool Installation? Amount for Sand Base with SAND COVE Amount for Sand Base with FOAM COVE 12′ Round 1.00 0.75 15′ Round 1.50 1.00 18′ Round 2.00 1.50 21′ Round 2.50 2.00.
What is the best thing to put under a swimming pool?
By far the best material to place under a swimming pool liner is Armor Shield or Gorilla Pad. These materials are breathable allowing moisture to escape and are extremely tough, keeping insects and moles from coming through and piercing the vinyl pool liner.
