QA

How To Sew Curtains For Beginners

How do I make my own curtains?

How do I start sewing curtains?

How to Make Curtains 1.Measure. If you’ve ever done a DIY, you probably know at this point that the first step is to measure—and that you should really measure twice before making the first cut! Cut fabric. Pin and sew one side. Create lining hem. Sew second side. Flip curtain right-side out. Create rod pocket. Iron.

Is it easy to make curtains?

Curtains may look really tricky but they are easy to sew! Curtains are only as complicated as you want them to be. Just start simple, ideally with a plain fabric, and progress as your confidence improves.

Is it cheaper to make curtains?

Apart from saving just small pennies for your curtains, you should also consider if it’s time-wise for you; convenience is a big factor these days. Sewing curtain fabrics might be cheaper, but it sure do cost you a lot of time.

How wide should I make my curtains?

How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.

How do I make my curtains look good?

go wide. The total width of your curtain panels should be at least two times the width of your window. This will help them look fuller when they are pushed to the sides and make sure they cover the window completely when you pull them together.

How do you measure for homemade curtains?

Calculate the Width A simple rule of thumb is that a curtain is one and a half to two times the width of the area it is meant to cover. A heavier fabric will provide fullness that a lightweight fabric can not. The lighter the weight of the fabric, the more fullness it will require.

Should I wash fabric before sewing curtains?

If you do plan on washing your fabric, ALWAYS wash it before starting your project. If you make it first and wash it later, you could have curtains that are too short or cushions that are too small.

Can I use a blanket as a curtain?

Thick drapes can greatly reduce your home’s heat loss. Instead of spending a lot on a set of curtains that you’re only going to use a few months a year, you could fashion a set from any blankets you have around the house.

Is it more expensive to make curtains?

By-the-Yard Fabric Fabric is expensive. If you find some really unique fabric and have solid sewing skills, homemade curtains from by-the-yard fabric are definitely a possibility. But, unfortunately, it’s probably not a budget possibility, at least, not compared to store-bought curtains already on the market.

How hard is making curtains?

Making curtains is easy, but only if you know the basics Curtains are almost all straight sewing, making them an easy project for beginners. That said, there are still some basics to master before embarking on sewing curtains for the first time.

How much material is needed for curtains?

Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.

What kind of fabric is used for curtains?

Cotton fabrics, whether 100% cotton or a cotton/polyester mix are the most common and are great versatile fabrics that work well on any window. They tend to be lighter in weight than others and so should always be lined when using for curtains or blinds.

How do I sew curtains together?

Step 1: Remove Stitches From Vertical Seams. Unstitch the vertical side seams on two curtain panels that you plan to sew together. Step 2: Remove Top and Bottom Stitching. Step 3: Iron the Seams. Step 4: Pin the Panels Together. Step 5: Stitch the Panels Together. Step 6: Stitch the Top and Bottom.

Should all curtains be the same length?

Generally, you should avoid anything shorter than 96 inches, unless you have very low ceilings. When in doubt, go with longer curtains rather than a shorter, cut off length. If you can’t find ready-made curtains that fit your home, you might need custom curtains.

How far should curtains be off the floor?

The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.

How far from the ceiling should you hang curtains?

No matter what the ceiling height, the minimum distance from the top of the window casing to the curtain rod is two inches. To create the illusion of height, mount the drapery rods close to the ceiling. This is particularly important to do if the room has low ceilings. Use these same rules when the windows are arched.

What are the different types of curtain pleats?

Drapery Pleat Styles Flat Drapery Pleat. The Flat Drapery Pleat is the simplest pleat style. French Drapery Pleat (also Known as a “Pinch Pleat”) Parisian Drapery Pleat. Cartridge Drapery Pleat. Inverted Pleat. 8-Inch Inverted Drapery Pleat. Grommet Pleat. Rod-Pocket.

What is the difference between pencil pleat and pinch pleat curtains?

Pinch pleat is a decorative heading for curtains, suitable for all fabrics. Pinch pleats use more fabric and are fuller than pencil pleats. The pleats are hand-sewn in and permanently fixed for more luxurious, tailored look. This will allow us to gather your curtains to the correct width.

What do pencil pleat curtains look like?

Pencil pleat curtains are a classic. Folds of fabric are tightly gathered to create a semi-cylindrical heading that resembles a line of pencils. From the close pleats of the header, the fabric tumbles freely to the floor. You can choose pencil pleat curtains for either poles or tracks.