Table of Contents
How far apart do you place grommets on curtains?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.
How do you keep grommet curtains evenly spaced?
Grommet panels fall into gentle pleats when in the open position, but each pleat must be adjusted every time the drape is closed. To keep them in place requires a small sleight-of-hand trick from a drapery workroom that allows you to open and close the drapes with the pleats remaining even and adjustment free.
Can grommets be added to curtains?
Grommets add a modern and professional finish to any curtain panel. They also tend to cost more than regular drapes. However, adding grommets to premade or custom panels isn’t as hard as it looks. The secret to having a well-tailored grommet panel is grommet tape.
How do you measure for grommets in curtains?
How to Measure: Grommet Top Curtains Measure from where you’d like your rod installed to where you want the curtain to fall. Measure grommet panel length from the very top of the curtain (not the top of the grommet) to the bottom. The grommet is set down about 1″ from the top of the panel.
How do you make ready made curtains look custom?
TIPS: How to Hang Curtains to Look like Custom Drapes When in doubt, go high. I like to hang my rod 6 inches above the window. Have the rod extend beyond the bracket. I tend to do 2-3″, not including the finial. Add at least 10″ to each side of the window. Use wide panels. Skim, kiss or puddle. Steam.
How can I make my curtains look fancy?
How to Make Your Curtains Look More Expensive Hang them high—and wide. Mount your curtain hardware as close to the ceiling as possible for a high-end look. Use statement hardware. Upgrade basic panels by adding thicker, more substantial hardware to your window treatments. Weigh them down. Train them.
Do you need a tool to install grommets?
The actual grommet installation “tools” can consist of a single grommet plier, or a combination of a setter and anvil. Grommet Pliers are normally used for small grommets and eyelets. For larger grommets, as we mentioned above, you use a setter and anvil to exactly match the size of the grommet.
What can I use instead of grommets?
A webbing loop is a great alternative to a grommet for things like sails, tie downs, fabric covers and more. Webbing loops are very useful, and they even have some added benefits versus installing grommets.
How many grommet panels do I need?
Make sure that the fullness of your curtains is about twice the width of the window. So if your window is 50” wide, you will want 100” of panel curtains. It is important to keep your window balanced. So if you put two panels on one side, then put two panels on the other side as well.
How high do you hang 84 inch curtains with grommets?
If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.
What size is #2 grommet?
Grommet and Eyelet Sizing Chart Size Outside Diameter (in millimeters) Depth (in millimeters) #0 (1/4″) 11.5mm 5.5mm #1 (5/16″) 17.5mm 6mm #2 (3/8″) 19mm 7mm #3 (7/16″) 22mm 7mm.
How do you put grommets in ears?
Grommets are tiny tubes inserted into the eardrum. They allow air to pass through the eardrum, keeping the air pressure on either side equal. The surgeon makes a tiny hole in the eardrum and inserts the grommet into the hole. It usually stays in place for six to 12 months and then falls out.
What is the difference between a grommet and an eyelet?
An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.
Can you hang 3 curtain panels?
Pull back two adjacent panels of the three curtains into a tie-back, creating a left-to-right or right-to-left swoop on the window, depending on your window hardware. Let the third curtain hang gracefully down the other side of the window or gather it with a tie-back of its own.
Can you put two pairs of curtains together?
You can sew two pairs of equal-length curtains together to make one pair. The curtain hems will line up after you align the casings if the curtains are the same length.
How do you add width to ready made curtains?
Measure the width of your curtain rod, rail or pole and divide it by two. If you want your curtains to be gathered, multiply the result by 1.5 to two, depending on how full you want them to be when drawn. Subtract the width of the pre-made curtain panels from the result.
How do you add trim to store bought curtains?
DIY: Adding Trim to Drapes and Curtains ~ A quick review: Purchasing Two Panels per side for a Fuller Look. Add fringe – either touch the floor or just above. Consider Lively Details Pom Poms, Buttons, Tassels – sew or hot glue in place. Attach Decorative Trim – sew or hot glue in place. Use Drapery Clips for Hanging.
How do you customize plain curtains?
Transform plain curtain into a special handmade look with an embroidered ribbon. Choose a trim that is wide enough to complement the curtain length. You’ll want the color to stand out against the curtain color, so look for something significantly lighter or darker (or complementary) to the curtain.
