Table of Contents
Do you need flux to solder copper pipe?
Strong metals such as brass and copper will require a synthetic acid flux in order to be soldered. This will remove not only oxidation but also corrosion and other residues that build up on these metals.
Why does my solder not stick to copper pipe?
If the solder is beading up or running down the pipe, you have a dirty fitting. Just as Vic says use clean fine grit sandpaper or emery cloth. Clean both surfaces, spread flux as soon as you clean them. Also clean and flux joint after you fit them together.
What’s the best solder to use on copper?
What Type of Solder is Used for Copper Pipe? Lead free solder is best for copper pipes carrying drinking water. It will be free of elements you don’t want entering your drinking water. However it will require a higher melting point than a 50/50 solder.
How long should solder cool before turning on water?
The only good way to test is to put pressure on the joint (turn on the water to the house). Be sure to wait until the solder has cooled (2-3 minutes) before pressurizing the line to avoid the solder cracking due to a quick change in temperature.
Can you overheat copper pipe when soldering?
Overheating is a major problem when brazing or soldering copper pipe because the flux will burn (become oxidized), stop working, and become a barrier to tinning. In addition, a heavy oxide can be formed on the pipe itself, preventing a bond from forming between the filler metal and the pipe surface.
What is the purpose of using flux when soldering a copper pipe?
The main purpose of the flux is to prepare the metal surfaces for soldering by cleaning and removing any oxides and impurities. Oxides are formed when metal is exposed to air and may prevent the formation of good solder joints.
Can you use regular solder on copper?
Copper pipes and other copper parts can be soldered using various metals with low melting points. Traditionally, lead alloys have been used for soldering copper, but these have fallen from favor in recent years due to lead poisoning concerns. Today, copper water pipes are soldered with lead-free flux and silver alloys.
What does flux do in soldering copper?
In plumbing, flux is a compound used as part of soldering a pipe joint. It’s an acidic paste that is applied to the part of the copper pipe where the solder must make a bond. It cleans the joint, if you rub it on some copper and leave it a short while, it will be left gleaming when you wipe it off.
What would causes solder not to stick?
A classic reason solder won’t stick to something is because you’re not getting it hot enough. My interns come to me with this problem all the time. Make sure the tip of the iron is nice and shiny. Touch some solder on it, and it should melt almost instantly.
Does flux help solder stick?
Flux removes oxidation from metals, and it’s crucial because solder won’t stick to oxidized metals, and metals oxidize very quickly at soldering temperatures.
What temperature should I solder at?
Make sure the surfaces to be soldered are clean. Turn on the soldering iron and set temperature above the melting point of your solder. 600°- 650°F (316°- 343°C) is a good place to start for lead-based solder and 650°- 700°F (343°- 371°C) for lead-free solder.
What solder do plumbers use?
Electrical solder is commonly a 60/40 blend of lead and tin. Because of the dangers of toxic lead in drinking water, local building codes now legally require the use of lead-free plumbing solder on all potable water plumbing connections that require soldering.
What is the strongest solder?
A 60-40 solder (60% tin, 40% lead) is the most expensive, but it makes the strongest bond and is easiest to work with because of its low melting point. Less expensive 40-60 solder is more difficult to use. A 50-50 solder is a good compromise between cost and ease of use.
Is silver solder better than lead solder?
4 Answers. In general silver makes the solder stronger and has a higher melting point. We use it in high temperature applications such as downhole. Copper in the alloy lowers the melting point and makes it somewhat easier to work, and has some chemical advantages when soldering to copper conductors.
How long does it take for solder to cool?
Solder won’t fill spots that are cooler than its melting point. Fill the joint until solder drips out, then move on to the next joint. Give the joint 30 to 45 seconds to cool and harden before putting pressure on it. Be careful; it’ll still be too hot to touch.
How long does it take for soldering iron to cool?
It is recommended that you wait at least thirty minutes before storing tools in an enclosed space, because most of the devices will be cool enough within two to three minutes.
Can you use too much flux when soldering?
Although there is a sufficient amount of flux present in the core of the solder wire to get your job done, the technicians (to make their job easy) tend to use additional flux in form of paste or liquid during the rework on the PCB. There is no problem with the use of flux during soldering.
What happens if you overheat solder?
Don’t overheat the flux If you don’t heat the joint enough, the solder won’t flow into it. If you heat the joint too long, you’ll burn the flux (it’ll smoke and turn black) and make it difficult to get the solder to flow into the joint.
What happens if copper is overheated?
Heated copper metal reacts with oxygen to form the black copper oxide. The copper oxide can then react with the hydrogen gas to form the copper metal and water.
Can you overheat solder?
Overheated solder joints can result from the soldering iron temperature being set too high, or result from solder failing to flow, possibly due to the surface of the pad or lead already having a layer of oxide, preventing sufficient heat transfer and therefore leaving you heating the joint for too long.
