Table of Contents
Usually a bad or failing blower motor resistor will produce a few symptoms that can alert the driver of a potential issue. Blower motor stuck on one speed. Blower motor does not work on certain settings. No air from the vehicle’s vents.
How do you test a blower motor resistor?
Place one lead of the Ohmmeter on terminal 1 of the resistor. Place the other lead on terminal 2 and check against specifications. If this circuit is open, showing infinity on the Ohmmeter, the blower resistor must be replaced. Move the lead from terminal 2 to terminal 3 and check this reading against specifications.
Is my blower motor or resistor bad?
If you try to increase the air pressure and you feel no difference in the pressure blowing, then your blower motor resistor may be failing. A damaged blower motor resistor will work on one fan speed which may not be enough to keep the inside of your car cool or warm enough.
How do you know if your blower motor is bad?
What Are Signs Your Blower Motor Needs to Be Replaced? Poor or Airflow from Air Vents. This will be the first and most obvious sign your blower motor has a problem. No Airflow At All From Vents. Skyrocketing Energy Bills. Strange Noises When You Turn on the Heat. Overheating Blower / Weird Smells.
Why does my blower motor resistor keeps melting?
Trent, one of the biggest reasons for blower motor resistors to have shorten life is actually because of faulty blower motor drawing too many amps, some times melting wires/plugs, heating up resistors shortening their life. Many Dodge forums tell of this problem.
Can you fix a blower motor resistor?
The average cost to replace the blower motor resistor at a repair shop is between $44 and $55 in parts and $70 in labor costs, for a total cost of around $114 to $125. On the other hand, you can easily fix the blower motor resistor at home in about an hour (even if you’re a beginner) and for around $70.
Can a bad blower motor resistor cause no AC?
Power to the blower motor is fed through the blower motor resistor, so if it fails or has any issues power can be cut off to the motor. A blower motor without power will not be able to produce any air pressure, and as a result the heating and air conditioning system will be left with no air coming from the vents.
Why does my blower only work on high?
Most car manufacturers use a series of resistors to make the heater blower motor run at different speeds. And when one or more of these resistors burn out, you’re usually left with only one heater blower motor speed—high. The resistor module is easy and inexpensive to replace.
Why does my blower motor resistor keep failing?
In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.
Can a blower motor resistor be bypassed?
Blower resistors are made of several resistors with different resistances. In the highest speed state, the blower resistor is bypassed completely and the fan is connected directly to the car’s battery, which allows maximum current through the motor.
Do blower motor resistors get hot?
Yes, it would get hot, but the resistor(s) are often mounted in the air duct near the blower, so the air stream would cool them. If it were outside the air stream or if the air were blocked it would definitely get hot.
Are all blower motor resistors the same?
Blower motor resistors have several resistors with different resistances. This controls the current that runs through the blower motor. Each fan speed selection is connected to one or more of the resistors in the blower resistor assembly.
How much is a motor blower resistor?
How Much Does a Blower Motor Resistor Replacement Cost? A blower motor resistor costs anywhere between $1 and $400. Factors that can affect its price include its condition, configuration, material, and set or kit inclusions. Labor may cost you an extra $45 to $55, depending on your area.
Why does my air only work on 4?
When a blower resistor fails, the highest fan speed usually is the only one that still works because it essentially bypasses the resistor and receives the maximum amount of voltage. When the resistor is working, it reduces the amount of voltage going to the lower fan speeds, so the fan runs slower.
How much does a new blower motor cost?
Replacing a blower motor costs $450 on average with a typical range of $250 to $800. With a warranty, you might pay as little as $150 for labor alone. For high-end models, like those with large motors or access issues, you might pay as much as $2,000.
Why is my furnace not blowing hot air?
Heater Not Blowing Warm Air Because of Thermostat Settings. Make sure you check the thermostat which controls your HVAC system. If your thermostat is set correctly and your heater is still not coming on, you may have a faulty thermostat. If these fixes do not work, a call to an HVAC professional is in order.
Should a blower motor spin freely?
If the fan turns at all without forcing, it should spin when powered up. If the fan turns freely or not is not a definitive indication that is good or bad.
Where is the blower motor reset button?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
