Table of Contents
Protect cedar posts with a sealant that repels water, prevents fading, and resists mildew. Simply paint the sealant on the posts with a brush. Use long, overlapping strokes in order to assure thorough coverage.
What do you seal cedar posts with?
The best clear Cedar finish stain for outdoors is Linseed oil, hands down. Linseed oil is the primary ingredient in any oil finishes, which dries clear. You can find other clear water-based stains, but will not last nearly as long as a Linseed oil based stain will.
How do you keep cedar posts from rotting?
Because water wicks up through the cut end grain of the post much more readily than it does through the sides of the post, either soak the end of the post in a preservative solution (copper naphthenate), or coat it with a waxy end sealer such as Anchorseal.
How long will untreated cedar posts last?
Cedar has a reputation for durability, but unless a few guidelines are followed, cedar posts can fail in as few as five years. Three factors contribute to this early failure: poor drainage, low-quality wood and poor protection against insect damage.
Should cedar posts be stained?
Although you can let your cedar weather naturally when used for a deck or a fence, when you’re using it as a siding the idea is to keep the elements out. Staining the cedar is the absolute best way to ensure this, especially in areas that have four-season climates.
Do cedar post need to be sealed?
Simply sprinkle water on the surface of the wood. If it soaks in, the post should be sealed. If the water beads up or stands on the surface, the posts do not need to be sealed. Applying protectant too early leads to inadequate absorption, while applying too late leads to premature degradation of the cedar.
Do you need to seal cedar wood?
Cedar offers a durable option for exterior and interior building projects with natural resistance to rot and decay, so a protective finish is optional. If you’re using cedar for an outdoor project, give it a light seal coat to guard against moisture and sunlight.
Is linseed oil good for cedar?
Its natural resistance to insects, disease and water-induced rot are factors in cedar’s longevity, but a protective application of oil can enhance the wood grain and increase the lifespan of the furnishing. Brush a heavy, dripping-wet coat of linseed oil onto the wood and let it soak in for approximately 30 minutes.
How do you preserve outdoor cedar?
On bare new or restored cedar, apply one coat only of water-repellent preservative (1% or less of wax by volume and content). Allow it to dry for the period of time recommended by the manufacturer. If the wood has been dip treated, a longer drying time may be needed.
Can you cement cedar posts?
Once your post is placed and set in concrete; you can then fill in the cut with concrete and smooth it out with a trowel. Another way to install a cedar post on concrete is to simply buy a flat mount concrete base for your post. You will need to drill holes into the concrete.
How do you treat ground wood posts?
Brush the waterborne copper naphthenate wood preservative onto the top of the fence posts where the fresh cut reveals exposed, untreated wood. Apply additional coats after the first coat absorbs into the wood. Brush copper naphthenate wood preservative into any cracks that develop anywhere on the fence post.
How do you protect wooden posts in the ground?
How You Can Protect Your Wooden Fence Posts From Rotting Wet Rot Vs. Dry Rot. Choose Rot Resistant Wood. Dry the Fence Posts Out. Consider Adding Posts to Concrete. Apply Preservative to the Wooden Post. Consider Staining Your Wood. Start Digging. Fill Up the Hole.
How do you refinish cedar posts?
Sand the cedar with 80-grit sandpaper to remove gray, weathered wood and remnants of the old finish. Follow up with 180-grit sandpaper to smooth out the surface. Sand in long, even strokes and avoid leaving any patterns on the wood.
Will linseed oil Keep cedar from turning gray?
Boiled linseed oil, despite not providing much water-resistance to wood when applied in the usual way associated with furniture, will do much to slow the weathering to that natural grey/silver colour if applied heavily and re-applied periodically.
What stain looks good on cedar?
Stains for Cedar Wood Natural or Clear Wood Stain. Semi-Transparent Wood Stain. Semi-Opaque Wood Stain. Opaque Wood Stain. Best Overall: READY SEAL Exterior Stain and Sealer for Wood. Premium Choice: DEFY Stain for Cedar. Most Cost-Effective: THOMPSON’S WATERSEAL Waterproofing Stain.
Can I use Thompson’s water Seal on cedar?
A new Waterproofing Stain from industry leader Thompson’s WaterSeal can not only protect your deck from further damage, but also add rich, beautiful color. Choose from five popular colors: Acorn Brown, Harvest Gold, Maple Brown, Sequoia Red or Woodland Cedar.
What is a good finish for cedar?
Tung oil, Danish oil, and Lacquer make the best finish for a cedar chest. Tung oil will provide a long-lasting, durable finish that’ll last years. Danish oil dries faster and is a beginner-friendly option. Lastly, lacquer is the most affordable and accessible finish for a cedar chest.
