Table of Contents
To unlock radio you will need access to a GM scan tool. The radio must be in LOC mode NOT in INOP mode. Turn the ignition ON (The radio displays LOC). Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds. The radio display changes from LOC to a three-digit number. Write this number down.
How do you unlock a GM factory radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How do you reset theft lock on a GM radio?
Step 1: Start the vehicle and turn on the radio. The radio will display “LOC” indicating the Theftlock system is activated. Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don’t have a fourth preset button, press and hold presets 2 and 3.).
How do I unlock my radio without the code?
Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.
How do I unlock my GM touch screen radio?
How to Unlock GM Navigation Radio System: 3 Main Stages Step 1: Insert your car key and set its mode to “Accessory” or “On.” Step 2: Turn on your radio and check that the letters “LOC” are displayed. Step 3: Locate the preset buttons 1 and 4. Step 4: Push the AM/FM button to get another three-digit code.
How do I unlock my 2013 GM radio?
To unlock the radio in the 2013 Chevy Silverado You will start by turning on the vehicle. You will see the display indication “LOC” which is telling You the theftlock system is activated. Now press and hold the reset buttons 1 and 4 for ten seconds or 2 and 3 if You radio does not have a fourth preset button.
Can I get radio code from VIN number?
If the manufacturer that built your vehicle offers online code lookup, you typically enter your VIN, the serial number of the radio, and contact information, including phone number and email. The code may be emailed to you for your records.
How do I find my GM radio code?
How To Retrieve a Radio Code from Your GM Put the key in the ignition and turn it to the setting ACC. Depending on the number of preset buttons that are on your radio, press and hold the 1 and 4 preset buttons together for 10 seconds. The screen will now read “LOC-XXX”. Press the AM/FM button on the radio.
How do I get my car out of anti-theft mode?
Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
What is the anti-theft code?
Located on multiple areas of a vehicle, Theft Code decals help prevent theft by warning professional thieves that the vehicle is equipped with an identification system.
How do I reset my radio after changing the battery?
Syncing the Radio Turn the ignition key to the “On” position, but don’t start the engine. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.
How do I unlock my GM Delco radio?
Call the GM assistance hotline at 800-537-5140. Follow the prompts and select the brand of your vehicle. Enter the six-digit dealer code and then enter the six-digit radio serial code. The automated system will provide you with a four-digit code to unlock your radio.
What happened Delco Electronics?
Although Delco Electronics no longer exists as an operating company, GM still retains rights to the Delco name and uses it for some of its subsidiaries including the ACDelco parts division.
How do I reset my Chevy utility radio?
How to Reset a GM Radio Turn on your car. Press and hold down both the second and third preset buttons. Write down the two- or three-digit code that appears in the LED display. Press the AM/FM button on the radio. Write down the next two- or three-digit code that appears in the LED display.
How do I unlock my 2015 Chevy radio?
How to Unlock a Chevy Radio Start the car and turn on the radio. Press down on preset numbers two and three until a three-digit number displays on the radio. Push the AM/FM button and a new three-digit number will display. Call 1-800-537-5140. Enter 106010, and then press *.
How do I unlock my 2015 GMC Terrain radio?
Unlock Radio Put the key in the ignition and switch the ignition to “RUN.” Press the “MN” button. Press the “MN” button again, until the last two digits of the numbers on screen are the last two digits of your three or four digit code.
How do I unlock my HHR radio?
To unlock the Chevy HHRs radio, turn the car on and make sure the radio is switched off. Then locate the minute button on the radio’s interface. Click the minute button and wait until a code that shows the numbers 000 appears on the radios screen. Click the minute button again until one zero disappears.
