QA

How To Use A Plumbing Snake Toilet

Can you run a plumbing snake down a toilet?

To unclog toilets that couldn’t be fixed with a plunger, use a toilet auger. Also called a plumbing snake, this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing. Feed the end of the cable into the toilet, taking care not to scratch the bowl.

How do you snake a toilet?

The most common item recommended to create a homemade toilet snake is a wire clothes hanger. Unwind the triangular part of your hanger, but leave the hook on the end in place. Feed this down your toilet and once your hit resistance, pull back. The hook should grab onto your clog and help loosen it.

How do you unclog a toilet if a snake won’t work?

What is the best snake to unclog a toilet?

BEST OVERALL: Ridgid GIDDS-813340 41408 Power Spin Drain Cleaner. BEST BUDGET: Liboyixi 6+1 Drain Clog Remover Tool. BEST FOR TOILET CLOGS: RIDGID 6 ft. BEST FOR HAIR CLOGS: FlexiSnake Drain Weasel Sink Snake Cleaner. BEST EXTRA LONG: VEVOR 50FTx1/2Inch Drain Cleaner Machine. BEST ELECTRIC: POPULO Electric Drain Auger.

What is the best liquid to unclog toilet?

Best Overall Drain Cleaner: Drano Max Gel Liquid Clog Remover. Best Drain Cleaner for Hair Clogs: Liquid Plumr Clog Destroyer + Hair Clog Eliminator. Best Enzymatic Drain Cleaner: Bio Clean. Best Monthly Build-up Remover: CLR Clear Pipes & Drains.

When should I snake my toilet?

So if you’ve tried a plunger, a hot-water flush, or even a homemade baking soda solution and things still aren’t flowing like they should, it’s probably time summon the snake (also known as a plumber’s auger).

How do you use a plumber snake?

Steps for using a drain auger Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake. Keep pushing more of the snake into the drain until you feel resistance. Rotate the snake against the blockage until you feel it feed freely into the pipe.

How long should a toilet snake be?

Because they are designed for the toughest of clogs, the cable should be no smaller than 5/8 inch in size, with a minimum length of 75 to 100 feet in length.

What happens if a toilet auger doesn’t work?

You need to make sure that you’ve securely tightened thumbscrew(the piece that secures the cable inside the drum or handle). If the thumbscrew is loose, the cable will not rotate at all when you twist the handle. The cable rotation is how the drain snake picks up debris, so if it can’t do this, your auger won’t work.

What is the difference between a snake and an auger?

Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.

Can snaking a drain make it worse?

If you have a clogged pipe, a drain snake is a simple and cheap tool you can use to fix it. These are advertised as devices that anyone can use to unclog a drain. But if used improperly, drain augers could make the clog worse. You could jam the obstruction in there tighter, or worse, do damage to your pipes.

Why should you put dish soap in your toilet at night?

It’s pretty simple — just like they do on food particles that are stuck to your dishes in the sink, the combination of hot water and dish soap help to dissolve and break up whatever it may be that is lodged in the toilet causing a clog.

How do you clean a drained snake after use?

With a high-bristle wire pipe brush, poke through the plumbing snake’s crevices, dislodging any remaining particulate that the scrubbing brush was unable to reach. Then, run the plumbing snake through clean water to ensure that the coil is clean. Wipe it down with a rag and leave it out to dry completely.

Can Coke clear a clogged toilet?

Cola Drain Cleaner Trick Allow a two-liter bottle of soda to come to room temperature. Pour the entire bottle down the clogged drain. Allow it to sit in the drain for at least an hour or two (or even up to 24 hours for stubborn clogs). Flush drain with boiling water.

What can I pour in my toilet to unclog it?

We recommend you add a cup of baking soda to your blocked toilet and wait for some minutes. Next, pour two cups of vinegar slowly into the toilet. Vinegar and baking soda will typically react to form bubbles, so ensure you pour carefully and slowly to prevent the toilet water from overflowing or splashing.

Why does my toilet keep clogging?

Excess waste and toilet paper or non-flushable items can become lodged in the toilet trap after they are flushed. When there is a significant mass stuck in the toilet trap, the toilet keeps clogging as normally flushed material is more likely to catch and clog.

Can you leave drain cleaner overnight?

Usually, drain cleaners are left for about 15 minutes up to half an hour before flushing it with hot water. For more stubborn clogs, some people are opting to let it sit overnight. The process of leaving it overnight can be beneficial if you have stubborn clogs built upon the pipes for a long time.