QA

Question: How To Use An Auger To Unclog A Toilet

How do you unclog a toilet when an auger doesn’t work?

Pour a few drops of dishwashing liquid into the toilet, then follow with a bucket of warm-to-hot water. You want it hot enough to melt any greasy lumps, but not boiling. Boiling water might crack your toilet bowl. If the toilet is still clogged, use a toilet plunger to try and push the mess down your pipes.

What is the difference between a toilet auger and a snake?

Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.

Can a toilet auger damage your toilet?

Tighten the auger’s screw. Once you’ve situated the auger correctly, push the cable through the toilet drain and turn it in a clockwise motion. In fact, it can cause more harm than good, as it can cause the porcelain in your toilet to crack or chip. It can also cause pipe damage or even full breakage.

What size Auger Do you need to unclog a toilet?

Toilet Auger With a length of 3 to 6 feet, they have a “J” shape that allows them to be easily fed through the toilet. The devices are hand-operated. The cable should be 1/2 to 5/8 inch in diameter. Toilet augers are specially designed not to scratch a toilet’s finish.

Will a toilet eventually unclog itself?

A toilet will eventually unclog itself if normal things like toilet paper and feces are stuck in it. It will take as fast as an hour for a toilet to unclog itself if the thing clogging it is easily degradable, or as long as over 24 hours if an abundant amount of organic matter clogs it.

How do you unclog a toilet that won’t unclog?

Hot Water and Dish Soap Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely. Alternatively, you could use hot water and shampoo from the sink if you wish to clear your toilet without leaving your bathroom.

Should you flush a clogged toilet?

The most important thing you can do in this situation is don’t flush a second time. Forcing the toilet to flush again releases gallons of water into the toilet bowl and will cause an overflow. A second flush will only create another disaster, in addition your current problem. Remember: don’t flush again!Apr 13, 2021.

What does a plumbing auger look like?

A plumbing auger or plumbing snake is a long, flexible metal cable with a small, uncoiled spring on one end and a handle on the other. The auger head on the snake looks like a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it.

What does a drain auger look like?

Drain augers are a long tool that looks like a snake. They can be fed down a drain or toilet to remove a blockage. Drain snakes have a rubber shield to protect drains and toilets from scratches, unlike most other snakes. This tool is excellent for bathroom drains including showers, bathtubs, and toilets.

How far does a toilet auger reach?

Closet augers are typically made with about 25 ft. of reach, so you might need to crank for a while depending on how far down your clog is. When you feel the cable come up against some form of resistance, that means you’ve reached the clog and can stop cranking.

How long should a snake be in a toilet?

A 12-foot snake is ideal for most home plumbing needs. You do not have to insert all 30 feet into the drain; using small sections of the snake while turning the snake by hand achieves the same result as a shorter plumber’s snake.

Is it OK to leave a toilet clogged overnight?

The longer you leave a clog, the more opportunities there are for the clog to get worse. The most water-soluble parts of the clog will dissolve, and the rest will fill in the gaps, making the clog worse. There is also the possibility that human error could come into play.

Why won’t my toilet unclog with a plunger?

Get a good seal on the toilet drain (that is, make sure you’re covering the entire drain or you won’t have enough pressure to loosen the clog.) Cover the plunger in water. You need water, not air, pressure to loosen the clog. If your toilet lacks water, pour in enough water till the plunger is covered.

Will vinegar unclog a toilet?

Baking soda and vinegar is a marvelous cleaning agent, and when dumped into a clogged toilet, often will break up the clog without you having to do a thing. This is what you want to do: combine two cups hot water with two cups white vinegar. Plus your toilet bowl will be cleaner!Feb 5, 2017.