Table of Contents
Instructions Fill the washing machine with water. Choose hot water for cold water for colored clothes and white clothes. Add 1/2 tablespoon of your detergent to the water the machine fills up. Add 1 Tbsp of OxiClean in the water that fills up. Place the laundry in the water. Fill the machine up to half full.
Can you use OxiClean in a high efficiency washing machine?
Oxiclean can be used directly with a high efficiency laundry detergent. Add 1-2 spoons of Oxiclean after mixing the detergent in the water. Simply, it will clean every stubborn stain on your clothes. Also, you can use OxiClean in the front load and top load option of your HE washer.
Do you use OxiClean with laundry detergent?
A: OxiClean is a detergent itself and would not need to be mixed or added with other detergents. It is not a detergent, therefore you need to use a laundry detergent with it.
Where do you put the detergent in a HE top load washer?
ADDING DETERGENT, SOFTENER & STAINFIGHTERS Pour detergent in the dispenser or, if there isn’t one, directly into the tub. If your washer is High-Efficiency (HE), only use HE detergent. If using detergent pods, color-safe bleach or fabric softener crystals, add them directly to the tub before loading clothes.
Is OxiClean a high efficiency detergent?
It’s a high def clean that works in both standard and high efficiency (HE) washing machines. Include one 60 oz. bottle of OxiClean High Def Sparkling Fresh Liquid Laundry Detergent. OxiClean offers a wide array of products to fit all your stain removal needs.
Where do I put OxiClean in my washer?
Add Oxyclean directly to the empty tub of the front load washer, according to the manufacturer’s prescribed amount, as another option. Load laundry, add laundry detergent, choose cleaning cycle and start washer.
How do you use OxiClean for laundry?
Soak 10-20 minutes, rinse thoroughly with fresh water, and let dry. Laundry Add one scoop of OxiClean to each load of laundry in addition to your regular detergent. OxiClean will boost your laundry detergent’s cleaning power and is safe on most fabrics including jeans and colors. Do Not Use On Wool Or Silk.
Can you wash clothes with OxiClean only?
Unlike chlorine bleach, OxiClean uses oxygen ions to safely clean and brighten clothes without risk of damaging colored clothing. OxiClean has enough cleaning power to use alone in the washing machine, allowing you to eliminate your basic laundry detergent.
How long can you leave OxiClean on clothes?
Spray directly into the spot or stain until saturated. Let stand for 5 minutes or up to a week depending on the severity of the stain. For fabrics that are prone to color change, do not let stand longer than 5 minutes. Do not treat garment while wearing.
How do you use OxiClean in a Maytag washer?
Oxi is added during main wash and Fabric Softener is added during rinse. IMPORTANT: Oxi option must be selected to ensure proper distribution at correct time in cycle. Do not overfill or dilute. Overfilling dispenser will cause fabric softener to immediately dispense into washer.
Can I put laundry detergent directly in washer?
No, You can not pour laundry detergent directly on your clothes. If you have an HE washer or a standard front-loading washer, it should have a special compartment for detergent. If laundry detergent does not dissolve completely in water It will damage the fibers of your clothes.
Do you pour detergent directly on clothes?
Concentrated detergent is very caustic, and you shouldn’t put it on clothes directly. However, what you can do in place of the dispenser if you don’t have a door safety switch, is pour the detergent into the cap and hold it under the water during the fill cycle. By doing this, you dilute the detergent as intended.
Is OxiClean safe for he?
Is OxiClean™ HE compatible? Yes. Refer to package for HE dosage instruction, and note front-loading washing machine directions below.
Can I use Arm and Hammer detergent in my HE washer?
All ARM & HAMMER™ Liquid Detergents are designed to work in both regular and high- efficiency (HE) machines. ARM & HAMMER™ Super Washing Soda is 100% sodium carbonate, so there should be no issues with adding it to an HE machine.
Why is my OxiClean not dissolving?
Water Temperature is Too Low If running a short wash cycle with cold water and a powder detergent, some of the powder might not completely dissolve during the wash cycle. Otherwise, mix the detergent in with some hot water and allow it to dissolve, then add it to the cold water filling the washing machine.
How do you use OxiClean white revive liquid in washing machine?
Get whites sparkling white. Pour. Directly onto the stain and rub gently. Wait. 5-10 minutes. Wash. In standard machines add OxiClean™ and detergent before adding laundry. For regular loads, fill cap 1/2 way to the top of bar 3. For large loads or extra whitening, use more.
Does OxiClean need hot water?
The manufacturer says that Oxi-Clean works best in warm to hot water, so when you’re washing with cold water, first dissolve Oxi-Clean in 16 ounces of warm-to-hot water, then add to the cold water.
How do you dissolve OxiClean powder?
In the Washing Machine Let your washing machine fill with water to the desired level. Do not add clothing yet. Add 1 scoop of the powder along with your regular detergent for a small load. Allow the powder to dissolve completely in the water. Add your clothes and wash as usual.
Can you use too much OxiClean?
Don’t use more than directed Using more OxiClean than you need to could result in color loss for your clothes and fabrics.
Can I use OxiClean on black clothes?
When used with detergent, OxiClean Dark Protect helps dark colors stay deep and rich and helps fabrics stay smooth. Continue to use OxiClean Dark Protect on all your dark color laundry loads to keep your dark clothes dark, wash after wash.
