QA

Question: How To Use Wires For A Cart

How do you use wires with a cart?

(this part is important, be careful with it too) Insert the black wire into the middle of the bottom of the cart where the metal is. Take the red wire and stick it on the outside of the cart. You should be able to hear the cart releasing air. At that point, inhale and BOOM!.

Why can’t I hit my cart wire?

The most common cause of a clogged cart is condensation buildup inside the cart’s airway. Over time, this condensation can block the mouthpiece, preventing vapor from passing through as you take a hit. You’ll usually notice condensation buildup before it becomes too much of a problem.

Why arent my carts hitting?

Check if the holes are open. If they appear clogged with residue, gently clean them with a needle or similar object. Check whether the holes are being obstructed by any other components of the vape pen (usually by the cart itself). Try to assemble your vape in such a way that the airflow holes aren’t blocked.

What do you do when a cart doesn’t hit?

The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it.

Why won’t my cart screw in my pen?

If you are experiencing an issue where your vape pen battery won’t charge or hit with a cartridge screwed in, you may need to adjust the connection plate inside the 510 thread. This is the most common reason for a battery to stop working and it doesn’t mean that your battery, or your cartridge, is defective.

Why is my DAB pen blinking red?

If the pen blinks red when vaping, it’s a sign your battery is going low (below 30%), and it’s time to recharge it. On the other hand, if the red or another color blinking happens when charging the pen, it simply means that the charging is happening.

Why is my pen blinking white?

This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.

Can you hit a cartridge with a lighter?

Well really it was yesterday but if u have a lighter and no batteries you can still hit your cartridge by placing the flame so that the tip goes in the hole in the contact and then inhale.

How long does it take for a dab pen to charge?

Charging time depends on they size and type of your battery. Once your vape pen is plugged in, it can take as little as 30 minutes, but up to several hours to fully charge. On average though, most people find their vape pens take only a few hours to be charged and ready to go.

How do you screw a cart into a pen?

Remove the rubber plug at the top of the cartridge. Screw the cartridge into the battery clockwise and make it firmly finger-tight, but do not over-tighten. Store the cartridge upright if you can—oil can seep into the mouthpiece if conditions are right.

Can you dab a broken cart?

Please don’t dab your cart oil if it breaks. If they have propylene glycol added, which alot do that I’ve been seeing, it does break down and could turn to acetone and in some environments has turned to formaldehyde at high temperatures.

What do the colors on a dab pen mean?

—— Red is 4.0 Volts, Blue is 3.8 Volts, Green is 3.6 Volts. —— We highly recommend the Green setting as it will prolong the battery life and reduce the heat used to vaporize the contents of the cartridge. FIVE (5) button clicks will turn on the the pen’s battery power, five clicks again to turn off.

Why is pen flashing purple?

A purple light will indicate this low temperature setting. The next voltage setting is medium at 3.2 volts, and is producing a higher potency draw.

What color is the highest on a dab pen?

The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.

Why is my battery blinking 3 times?

Certain batteries will flash 3 times to indicate a short circuit. If the tank is screwed down too hard it can push the centre pin on the battery down just a tad and the connection is lost. Just check the battery isn’t screwed on too tight.

Why is my DAB pen blinking 4 times?

Vape pen blinks 4 times Some pens will blink 4 or more times when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms. Due to the lower resistance, the battery will automatically shut down the output to protect the pen. To fix this issue, you need to charge your battery.