QA

Question: How To Weave Chain Link Fence

Do I need a top rail for chain link fence?

Corner or main posts (galvanized pipe) provide the basic support for a chain-link fence. Top rails run the continuous length of the fence between the main posts. For residential use, 1-3/8 inch diameter pipe is strong enough.

How do I make my chain link fence look pretty?

Slide privacy slats into the links of the fence. Install privacy slats, into the mesh of the chain link fencing, to create privacy and add color. Cover the chain link fence with climbing vines. Painting chain link renews the look. Rolled bamboo creates a serene wooded atmosphere.

How far apart should the post be on a chain link fence?

SPACING FENCE POSTS As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer’s instructions for spacing, which typically ranges from 4-10′ apart—spacing should not exceed 10′ on-center. (fig.

How do I keep my dog from going under the chain link fence?

Install tension wire on the bottom of the fence line. This wire reinforces the bottom of a chain link fence and helps prevent the bottom from ‘pulling’ up if an animal tries to push the fabric out and away from the fence line.

What material is used for fence weaving?

Typically, slender and flexible saplings or suckers of willow trees are preferred to create the wattle fencing. Excess leaves and buds are stripped, and then the withies are woven into wooden posts. Willow is the most sustainable material that can be used for this purpose.

Can you curve a chain link fence?

Chain link is just not the ideal fence for small radius’s, more post will produce a smother curve . They can be at any center you want, as long as its under 10′.

Can I install a chain link fence without a top rail?

Without rails, your fence wouldn’t last very long! Fence rails are the long, metal parts of your link fence that run horizontally at the top. Though some fences, like wooden fences, have two rails (one on the bottom and one on the top), most chain link fences will just have one rail at the top.

Does chain link fence need tension wire?

Chain Link Tension Wire Installation. Tension wire is an important part of chain link fencing. It secures the bottom and top of your chain link fence to ensure the chain links remain tight to the posts and rails.

Do you have to cement chain link fence posts?

You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.

How do you secure the bottom of a chain link fence?

The simplest way to reinforce your chain link fence at the bottom is by using tent stakes. Tent stakes can be bought at any hardware store, and they are very cheap. If you don’t want to do any kind of installation or you’re just not the DIY person, then using tent stakes is a simple and straightforward solution.

How can I hide my neighbors chain link fence?

Cover a chain link or wood fence with sturdy canvas fabric to increase privacy and change the look. You can either paint the fabric, let your kids paint the fabric or leave it as is. 3. Add commercial privacy screening to a wood or chain link fence to block the view of a neighbor’s ugly yard.

What should I plant next to my chain link fence?

Some evergreen vines for covering chain link fences include: Persian Ivy. English Ivy. Boston Ivy.For a foliage vine for your fence, try: Hardy Kiwi. Variegated Porcelain Vine. Virginia Creeper. Silver Fleece Vine. Purple Leaved Grape.

How deep should a metal fence post be set?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How many bags of cement do I need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.

How do you stabilize a chain-link fence?

10 Effective Ways to Stabilize a Chain Link Fence Get it Professionally Installed. Anchor the Posts in Concrete. Use Steel Fittings. Say No to Vines on Your Fence. Don’t Skip Using Tension Wire. Use Tent Stakes. Consider Installing Buried Mesh. Build with Thicker Materials.

What can I put on the bottom of my fence to keep my dog in?

You can use chicken wire, hardware cloth, or a piece of chain-link fence attached to the base of the fence. Some people bury it for aesthetic reasons. But you can also lay it on top of the grass and hold it down with rocks, gravel, mulch, or even planters. Pour a concrete footer.

What can I use to block the bottom of my fence?

What Can I Put at the Bottom of a Fence to Keep Animals Out? Horizontal Board. Attach a board to the bottom of your fence. L-Shaped Footer. To keep out animals that dig, install an L-shaped footer made of galvanized, welded wire mesh underneath your fence. Poultry or Hex Netting. Rocks and Boulders.

What is a woven fence?

A woven fence made either of panels or as a continuous weave consists of upright poles which are sunk deep into the ground and horizontal strips which are then woven across the uprights. The finished look largely depends on the materials in your fence.

How do you basket weave a fence?

BUILD THE STRUCTURE. Install posts and rails. CUT FENCE BOARDS TO FIT. Cut three fence boards about 2 inches longer than the distance between two posts. WEAVE THE SPACERS. FASTEN LOOSE ENDS OF BOARDS. INSTALL A SECOND SET OF SUPPORTS. WORK YOUR WAY DOWN THE FENCE.