Table of Contents
What color wire goes where on a Honeywell thermostat?
Meaning of Wiring Terminal Letters W (white) controls the auxiliary heating elements. Y (yellow) controls the compressor on the cooling system. G (green) controls the fan. C (blue or black) provides a return path to the transformer.
Where do the wires go on a Honeywell thermostat?
If you just have one wire, regardless if it’s labeled RC, it will go into the R terminal, and the jumper connecting terminals R and RC will be in place. Some thermostats have a jumper switch, some have a metal staple, others may have a plug, and the jumper may also just be a wire connecting the two terminals.
What color wire goes where on a thermostat?
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
What color is the C wire?
Blue wires are also called “C” wires because they are the Common wire. C wires are necessary for any “smart” thermostat that needs to be connected to a power source 24/7, regardless of your heat pump type.
What are the wires on a thermostat?
Thermostat Wiring Tips The W wire is connected to your heating system. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan. Rc and Rh: The red wire(s) are the power source for your thermostat.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
What are the four wires in a thermostat?
In general, the heating wire (often white), goes into the “W” port, the cooling wire (often yellow), goes into the “Y” port, the wire that sends power from the HVAC system to the thermostat (often red), goes into the “R” port, the fan wire (often green), goes into the “G” port, and the common wire (often blue), which.
How do you wire a house thermostat?
Here’s how to wire a thermostat using the color code and, FYI, each terminal’s purpose. Attach the red wire to the R terminal (Call for heating and/or cooling). Attach the green wire to the G terminal (Fan). Attach the white wire to the W terminal (Heat). Attach the yellow wire to the Y terminal (AC).
Why is there a jumper between R and RC?
Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.
What is the B terminal on a Honeywell thermostat?
W/B: The W/B terminal controls the heat relay or valve. When the thermostat calls for heat, a signal is sent to power up the furnace and the blower fan or the boiler, heating your home.
What does the R wire do on a thermostat?
The R wire is the power wire for your heating and cooling system. If you only have one R wire (no Rh or Rc), you can connect your R wire to either Rc or Rh on the Nest thermostat.
How do I wire a 2 wire thermostat?
Unscrew the two wires from the terminals. Remove the motherboard of the old 2 wire thermostat and put the new 2 wire thermostat in its place. Reconnect the red and white wire, tighten down the set screw, and put the control panel back on. Test the 2 wire thermostat wiring by turning the furnace on.
Why does my thermostat only have two wires?
If your heating system has only two wires, the job of the thermostat is simple. All it has to do is turn the heat or the cooling on and off. There’s also no thermostat blue wire, or common wire, to power the thermostat, so it has to operate on its own, either using batteries or mechanical temperature detection.
What is the Y2 wire on a thermostat?
Y2 is the thermostat wire for second stage of cooling. Y wire is for the first compressor (air conditioner units) and Y2 wire is for the second compressors (air conditioner unit). Y2 wires apply only if you have two air conditioner compressor units running from one AC thermostat.
How do I know if C wire is live?
Easiest way to check is pull any batteries out of the old thermostat and look for a wire (normally blue) is connected to the C spot. If the old unit supports being powered by the common wire, then the unit will turn on without batteries.
Do Round Honeywell thermostats have C wire?
C-Wires are required on most Honeywell Wi-Fi thermostats, with the exception of the Smart Round Thermostat (formerly known as the Lyric Round). C-Wires are required on all Honeywell Home / Resideo Wi-Fi thermostats.
How do you connect 4 wires to 2 wires?
The first option is to use the black wire of the 12-3 cable as the hot wire. Connect the black wires of both cables together, and connect the common white wires together. Cap the red wire and leave it untouched in the junction box. Place plastic twist caps on all splices.
Do I need a jumper from R to RC?
If you have a wire in the R terminal, and no wire in the RC terminal, use the jumper selector switch, the jumper plug, or a small jumper wire to connect the R and Rc terminals. If you have a wire in the R terminal, and another wire (not a jumper) in the RC terminal, you will not need to connect the R and RC terminals.
Should my thermostat be on E or F?
The thermostat fan operation switch, labeled FUEL SWITCH in the diagram below, is factory-set in the “F” position. This is the correct setting for most systems. The “E” setting will allow the fan to turn on immediately with the heating or cooling in a system where the G terminal is connected.
