Table of Contents
Is Hydrocal Waterproof? Hydrocal is waterproof. Aside from that, it is also weatherproof and scratch-resistant.
Can Hydrocal be used outdoors?
It is not for making outer or mother molds, and it is not recommended for outdoor use. Designed for strength and casting detail. Hydrostone is 40% to 50% harder than casting plaster and works much like plaster in mixing, pouring, and setting.
Can Hydrocal get wet?
Allow soaking for 1-2 minutes. HYDROCAL Brand White Gypsum Cement should be fully dispersed in the water prior to mixing.Technical Properties.
| Technical Properties | English | Metric |
|---|---|---|
| Dry Compressive Strength | 5,000 psi | 34.5 MN/m2 |
| Maximum Setting Expansion | 0.390% | 0.390% |
| Density | ||
| Wet | 110.0 lb/ft3 | 1.76 g/cm3 |
What is Hydrocal made of?
Hydrocal is mainly composed of plaster of Paris and a small amount of Portland cement. It has a similar formula as hydrostone, duracal, and ultracal. They are all used for casting sculptures and well as making art objects and molds.
Will plaster of Paris last outside?
Plaster of Paris left unprotected in outdoor conditions will deteriorate fast. Use of paint on the plaster of Paris will help prevent the deterioration somewhat. The way forward is to use a water seal and use at least two layers of plaster of Paris one on top of the other.
Will plaster of paris be OK outside?
Plaster of Paris is an extremely porous material when dried, and as such, will absorb any new water that touches its surface. In order to waterproof plaster of Paris for outdoor use or for temporary exposure to water, you must fill in as many surface pores as possible.
Is plaster stronger than clay?
Often when plaster is made from alpha gypsum and is stronger, but it is less porous. Because it’s less porous, it takes longer to absorb liquid from clay. It also takes longer for the mold to dry out after it’s been used. However, #1 pottery plaster has the advantage of being both strong and absorbent.
Can you carve Hydrocal?
Hydrocal can be carved or added to if needed. Setting time is approximately 30 minutes. Casts can be made from most all molding materials.
What is Hydrocal used for?
Hydrocal is a US Gypsum product composed mainly of plaster of Paris and a small amount of Portland cement. Hydrocal, like its similar formulas Hydrostone, Ultracal, Duracal and others are all used for casting sculptures and other art objects as well as molds.
Is Hydrocal toxic?
INGESTION: No known effects. EMERGENCY AND FIRST AID PROCEDURES: EYES: Flush thoroughly with water for 15 minutes. INGESTION: No harmful effects expected.
What is the compressive strength of plaster of Paris?
The horizontal compressive strength of the LPOP and CPOP are 1712 and 1595 N while the vertical compressive strengths are 1070 and 623 N, respectively. These results show that the LPOP produced from locally sourced materials compete favourably in terms of mechanical properties with POP bandage in the market.
Is Ultracal 30 water resistant?
Ideal for splash-casting molds and models for phenolic, polyester and epoxy resins, USG Ultracal 30 Gypsum Cement is water soluble – there is no need for organic solvents for cleanup.
How long does Hydrocal take to cure?
Sift or strew HYDROCAL Brand White Gypsum Cement into water slowly and evenly. Do not drop handfuls of HYDROCAL Brand White Gypsum Cement directly into the water. Allow soaking for 1-2 minutes.How Long Does Hydrocal Take To Cure?
| Technical Properties | English | Metric |
|---|---|---|
| Set Time (Machine Mix)* | 25-35 min. | 25-35 min. |
What is the difference between Hydrocal and hydrostone?
Hydrocal – Ideal for casting lifecast faces, heads, and torsos from alginate molds. Hydrostone – Great for casting statuary and lifecasts such as hands.
How long does it take Ultracal 30 to dry?
ULTRACAL 30 Set Time is 25-35 minutes.
How do you mix hydrostone?
Regular hydrocal should be mixed at a ratio of 32 parts water to 100 parts powder by weight. (A bit wetter than regular plaster). “SuperX” hydrostone is mixed 22 parts water to 100 parts powder.
Can I use plaster of Paris for slip casting?
Molds are made from plaster of Paris as they’re highly absorbent. Carefully pour your slip into the cavity of the mold and the plaster of Paris mold will start to absorb water from the clay and the drying process of the clay will begin. Pour it back into the bucket of your clay slip, so as not to waste any.
Is Hydrocal porous?
USG Hydrocal® is a multi purpose gypsum cement that offers twice the compressive strength of regular plaster. Is more porous than Ultracal 30. Requires 45 parts water by weight per 100 parts plaster.
What is the difference between Ultracal and Hydrocal?
Ultracal 30 is more dense and harder than Hydrocal and is advertised by USG as a tool making plaster. Hydrocal is a casting plaster that hold detail well. Hydrocal is easier to work with post casting for corrections. Ultracal is more durable.
What is the difference between Hydrocal and plaster of Paris?
Hydrocal is much stronger than plaster of paris. The sloughing of plaster results in lots of dust and chips on a continuous basis. Sealing plaster of paris can help, but most sealers causes the plaster to have a sheen, do not take stains, and it still does not make the finished scenery any stronger or damage resistant.
How hard is Hydrocal?
Hydrocal is 30% to 40% harder than casting plaster and works much like plaster in mixing, pouring, and setting.
What is the hardest type of plaster?
PURITAN POTTERY PLASTER – Unique, specially designed for use with mechanical clay forming machinery. Absolutely the hardest, most wear-resistant plaster made for molds, and a favorite for jiggering molds. STATUARY HYDROCAL – A basic HYDROCAL cement with a lower use consistency of about 40 lbs. of water per 100 lbs.
What is Hydrocal?
Hydrocal White is a multi-purpose gypsum cement ideal for both solid and hollow casting of lamp bases and figurines. Designed for thin sections, its high green strength minimizes breakage during removal from the most intricate molds.
