Table of Contents
Joint compound does not have a fire rating by itself, but does meet ASTM C475. When fire testing a wall the fire rating is not for individual products, but for all the system components together. USG Joint Compounds are used in numerous fire-tested assemblies.
Is drywall mud fire rated?
A fire-rated joint compound that dries to a red color that is easily identified by fire marshals.
Is there a fire rated joint compound?
FireStop expansion joint foam filler is a non-fibrous sponge making an ideal fire barrier. It is an economical seal between building elements where minimal movement is expected and is available in 1 and 2 hour rating.
How do I know if my drywall is fire rated?
Type X drywall products will have a UL/ULC Marking printed on the back of each board identifying it as a fire-resistance rated board.
Is joint compound hazardous?
Drywall joint compound can contain harmful ingredients, including formaldehyde and acetaldehyde, both known carcinogens, and crystalline silica, which is a carcinogen when inhaled. Look for joint compound that is low in VOCs, biocide free, and free of formaldehyde and acetaldehyde.
What’s the fire rating on 5/8 drywall?
The 5/8-inch, “fire-code” drywall (called Type X) increases a wall’s fire rating to a minimum of 1 hour, from the 30-minute rating for standard ½-inch drywall. And it’s not just thickness that makes the difference. Type X has a denser core and contains glass fibers that keep it from crumbling in the heat.
Can you mud over fire tape?
The surface of the Fire Tape is treated with silicone and mud or paint will not adhere to it. If you need to disguise the color of the Fire Tape on exposed walls, we recommend using a primer called Zinsser, Bulls Eye Odorless to coat over it. Once the Zinsser is dry, a latex paint or mud can be applied.
Is joint compound fire resistant?
Joint compound does not have a fire rating by itself, but does meet ASTM C475. When fire testing a wall the fire rating is not for individual products, but for all the system components together. USG Joint Compounds are used in numerous fire-tested assemblies.
Is durock fireproof?
A Durock panel with a thickness of 1/2 or 5/8 inch can provide two hours of fire protection when installed correctly and in conjunction with all fireproofing construction materials.
How thick is a 2 hour fire rated wall?
A 2-hour rating can be achieved by a wall with an equivalent thickness of as little as 3 1/5 inches when expanded slag or pumice is used or 4 1/2 inches when siliceous gravel is used as the aggregate.
Does 1/2 drywall have a fire rating?
Most Type X drywall has a one-hour fire rating. The fire rating for the 1/2-inch drywall used throughout the rest of the home is 30 minutes.
What is a 2 hour fire rated wall?
2. Gypsum Board: Two (2) hour rated walls have two (2) layers of 5/8″ Type ‘X’ gypsum wallboard panels on each side of the steel studs. The “Fire Tape” product would be used as an alternative to conventional joint tape in specific systems when: 3.
Is all drywall fireproof?
Although all drywall is fire resistant to a degree, type-X and type-C drywall are designed specifically to be used in fire-rated assemblies. These products help to contain fire in the area of its origin much better than regular drywall.
What is joint compound good for?
When used for new walls, joint compound effectively eliminates all blemishes from the surface of the drywall, such as fasteners, damage, or drywall tape. Joint compound is used to finish gypsum panel joints, corner bead, trim and fasteners, as well as skim coating.
Is joint compound toxic to dogs?
A phone call to the Animal Poison Control Center in Urbana confirmed that the spackling compound was extremely toxic to pets. The ethylene glycol it contained forms crystals in the kidneys, which render them permanently useless. In a few hours, if nothing was done, each dog would likely not survive.
Is joint compound the same as drywall compound?
Drywall mud, also called joint compound, is a gypsum-based paste used to finish drywall joints and corners in new drywall installations. Drywall mud comes in a few basic types, and each has its advantages and disadvantages.
What is fire rated ceiling?
Physical Barrier An Underwriters’ Laboratories (UL) fire resistant rated ceiling system provides separation between the elements of the building services (i.e. ductwork and piping) and the occupied space below. A UL fire resistant rated ceiling also provides a known, specified fire resistance period.
How do you get a 2 hour fire rated wall?
Double the number of Type X sheets on the wall for a simple system installed over fire-resistant fiberglass insulation; each sheet of 5/8-inch Type X drywall is rated to resist fire for one hour, so two layers will produce a two-hour firewall.
How many layers of gypsum are needed for a 2 hour rating?
As 2 hours of fire protection has become the standard for fire safety in America, it has become somewhat of a standard practice to include two layers of type X drywall within a building’s perimeter in order to achieve this required level of fire safety.
What is fire tape for?
Fire tape is a specific product that is installed to slow down or prevent household fires from occurring. It is often used in certain areas of the home such as the garage, the utility room, or the furnace room.
Do you have to fire tape drywall seams?
A quick job: Only the tape-embedding coat is necessary when fire-taping garages and other nonliving areas. Garages, utility rooms, and furnace rooms are often hung with fire-resistant drywall. There is a self-adhesive fire-rated tape available that doesn’t require a coat of joint compound to maintain its fire rating.
How much should I charge to finish drywall?
Cost to tape and mud drywall The national average for a total drywalling job, from start to finish, is $1.30 to $4 per square foot. Hanging just the unfinished drywall panels costs $0.24 to $2.25 per square foot. To finish the drywall, it costs $1 to $1.65 per square foot.
